[Wed Jun 20 10:15:18 2012] Detection parameters:
  Position = (324.5, 413.8) = 2 25 6.72 -5 0 45.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.8 +/- 10.6
  Background counts = 15.5
  Rate = 0.002 +/- 0.0005

[Wed Jun 20 10:15:19 2012] Off-axis axis estimate = 8.57'
[Wed Jun 20 10:17:12 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 10:17:12 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Wed Jun 20 10:17:12 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.854
[Wed Jun 20 10:17:12 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 10.71"
[Wed Jun 20 11:35:43 2012] fullrun_pn_xmm0111110301_pi300-10000_cl_pass0_src13.ximg exists
[Wed Jun 20 11:35:43 2012] fullrun_pn_xmm0111110301_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Jun 20 11:35:43 2012] Fit fullrun_pn_xmm0111110301_pi300-10000_cl_pass0_src13 appears to have run properly
[Wed Jun 20 11:35:43 2012] fullrun_pn_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Jun 20 11:35:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 20 11:35:43 2012] fullrun_pn_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jun 20 11:35:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 20 11:35:43 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 12:56:31 2012] Source 13 is offset by -5.468208 and -7.203940 pixels which is larger than
2 X fitted extent = 1.664699 x 0.746933, not incorporating fit results
[Wed Jun 20 12:56:31 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 12:56:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 12:56:31 2012] Assessing source extent using major
[Wed Jun 20 12:56:31 2012] Source does appear to be extended
[Wed Jun 20 12:56:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 12:56:52 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 12:56:52 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Wed Jun 20 12:56:52 2012] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.854
[Wed Jun 20 12:56:52 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.71"
[Wed Jun 20 14:12:42 2012] fullrun_pn_xmm0111110301_pi300-10000_cl_pass1_src13.ximg exists
[Wed Jun 20 14:12:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110301_pi300-10000_cl_pass1_src13.csv
[Wed Jun 20 14:12:42 2012] fullrun_pn_xmm0111110301_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Jun 20 14:12:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111110301_pi300-10000_cl_pass1_src13.csv
[Wed Jun 20 14:12:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111110301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111110301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 14:12:42 2012] fullrun_pn_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Jun 20 14:12:42 2012] fullrun_pn_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Jun 20 14:12:42 2012] Fit fullrun_pn_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed Jun 20 15:24:39 2012] Spatial fit model total counts = 166.806000, observed total counts = 167.000000
[Wed Jun 20 15:24:39 2012] Offset between fit and detection position for source 13 = 0.318052 pixels
[Wed Jun 20 15:24:39 2012] 165.842400 total counts/ 113.504000 bgd. counts: snr = 4.912639
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.318052 pixels
  Position = (324.6, 413.5) = 2 25 6.68 -5 0 48.0
  Extent = 7.6 (5.9-9.9)", rotation angle = 0
  Source counts = 52.3 +/- 12.9
  Background counts = 113.5
  Rate = 0.003 +/- 0.0007
[Wed Jun 20 15:24:39 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:24:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:24:39 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 15:24:39 2012] Source does appear to be extended
[Wed Jun 20 15:24:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 15:24:57 2012] XMMSAS src. selection expression = ellipse(28194.828000, 35924.291000, 456.965413, 456.965413, 0.000000, X, Y)
[Wed Jun 20 15:24:57 2012] Writing source region out to fullrun_pn_xmm0111110301_pi300-10000_pass1_cl_src13_src.reg
[Wed Jun 20 15:24:57 2012] Extracting stamp from image fullrun_pn_xmm0111110301_pi300-10000_cl_sm2.00.img.gz, (298, 387) - (351, 440)
[Wed Jun 20 15:24:57 2012] XMMSAS bgd. selection expression = annulus(28194.828000, 35924.291000, 761.609022, 1523.218044, X, Y) && !ellipse(28942.656982, 33770.737488, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 20 15:24:57 2012] Writing fullrun_pn_xmm0111110301_pi300-10000_pass1_cl_src13.gif
[Wed Jun 20 15:31:03 2012] Mean detx,y = (1107.24, 11498.11) 
[Wed Jun 20 15:31:05 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 15:31:24 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 15:31:24 2012] Setting source spectrum file to fullrun_pn_xmm0111110301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jun 20 15:31:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111110301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Jun 20 15:53:15 2012] Not generating rmf since there are only 52 counts
[Wed Jun 20 15:53:15 2012] rmf not generated due to insufficient counts
[Wed Jun 20 16:35:22 2012] Updating aperture counts using extracted products
[Wed Jun 20 16:35:22 2012] Error reading totcts from fullrun_pn_xmm0111110301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Jun 20 16:35:23 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 16:35:23 2012] Using photon index=1.80, rate=0.00267, arf fullrun_pn_xmm0111110301_pi300-10000_pass1_cl_src13.arf
[Wed Jun 20 16:35:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 16:35:23 2012] Updating source flux to 1.3e-14
[Wed Jun 20 16:35:45 2012] Flag b found in src. 13 procflags, skipping spectral fitting
[Wed Jun 20 16:35:45 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting