[Wed Jun 20 10:15:47 2012] Detection parameters:
  Position = (332.1, 477.0) = 2 25 4.52 -4 56 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.7 +/- 7.1
  Background counts = 6.6
  Rate = 0.001 +/- 0.0003

[Wed Jun 20 10:15:47 2012] Off-axis axis estimate = 13.17'
[Wed Jun 20 11:35:44 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 11:35:44 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 11:35:44 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Wed Jun 20 11:35:44 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.861
[Wed Jun 20 11:35:44 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 13.01"
[Wed Jun 20 12:20:44 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src27.ximg exists
[Wed Jun 20 12:20:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src27.csv
[Wed Jun 20 12:20:44 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Jun 20 12:20:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src27.csv
[Wed Jun 20 12:20:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 12:20:45 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Jun 20 12:20:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed Jun 20 12:20:45 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Jun 20 12:20:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed Jun 20 12:20:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 12:56:36 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 16.849160 pixels away
[Wed Jun 20 12:56:36 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 12:56:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 12:56:36 2012] Assessing source extent using major
[Wed Jun 20 12:56:36 2012] Source does appear to be extended
[Wed Jun 20 12:56:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 14:12:43 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 14:12:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 20 14:12:43 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Wed Jun 20 14:12:43 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.861
[Wed Jun 20 14:12:43 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 13.01"
[Wed Jun 20 14:51:59 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src27.ximg exists
[Wed Jun 20 14:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src27.csv
[Wed Jun 20 14:51:59 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Jun 20 14:51:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src27.csv
[Wed Jun 20 14:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 14:51:59 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Jun 20 14:51:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Jun 20 14:51:59 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Jun 20 14:51:59 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src27.csv
[Wed Jun 20 14:51:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 15:24:43 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 16.849160 pixels away
[Wed Jun 20 15:24:43 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:24:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:24:43 2012] Assessing source extent using major
[Wed Jun 20 15:24:43 2012] Source does appear to be extended
[Wed Jun 20 15:24:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 16:08:22 2012] XMMSAS src. selection expression = ellipse(28840.698547, 41446.581177, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 20 16:08:22 2012] Writing source region out to fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src9_src.reg
[Wed Jun 20 16:08:22 2012] Extracting stamp from image fullrun_mos1_xmm0111110301_pi300-10000_cl_sm2.00.img.gz, (295, 439) - (370, 514)
[Wed Jun 20 16:08:22 2012] XMMSAS bgd. selection expression = annulus(28840.698547, 41446.581177, 1087.500000, 2175.000000, X, Y)
[Wed Jun 20 16:08:22 2012] Writing fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src9.gif
[Wed Jun 20 16:14:07 2012] Mean detx,y = (-16589.29, 2652.87) 
[Wed Jun 20 16:14:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 16:14:27 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 16:14:27 2012] Setting source spectrum file to fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jun 20 16:14:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Jun 20 16:23:34 2012] Not generating rmf since there are only 31 counts
[Wed Jun 20 16:23:34 2012] rmf not generated due to insufficient counts
[Wed Jun 20 16:35:24 2012] Updating aperture counts using extracted products
[Wed Jun 20 16:35:24 2012] Error reading totcts from fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jun 20 16:35:24 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 16:35:24 2012] Using photon index=1.80, rate=0.0013, arf fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src9.arf
[Wed Jun 20 16:35:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 16:35:24 2012] Updating source flux to 5.5e-14
[Wed Jun 20 16:35:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting