[Wed Jun 20 10:15:47 2012] Detection parameters:
  Position = (242.2, 274.9) = 2 25 30.67 -5 10 50.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.4 +/- 13.9
  Background counts = 11.6
  Rate = 0.005 +/- 0.0006

[Wed Jun 20 10:15:47 2012] Off-axis axis estimate = 4.42'
[Wed Jun 20 11:35:44 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 20 11:35:44 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Wed Jun 20 11:35:44 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.012
[Wed Jun 20 11:35:44 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 8.64"
[Wed Jun 20 12:20:44 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src4.ximg exists
[Wed Jun 20 12:20:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src4.csv
[Wed Jun 20 12:20:44 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Jun 20 12:20:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src4.csv
[Wed Jun 20 12:20:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 12:20:44 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Jun 20 12:20:44 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Jun 20 12:20:44 2012] Fit fullrun_mos1_xmm0111110301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Jun 20 12:56:36 2012] Spatial fit model total counts = 150.342000, observed total counts = 148.000000
[Wed Jun 20 12:56:36 2012] Offset between fit and detection position for source 6 = 0.158015 pixels
[Wed Jun 20 12:56:36 2012] 148.115000 total counts/ 67.228300 bgd. counts: snr = 9.865090
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.158015 pixels
  Position = (242.4, 274.8) = 2 25 30.63 -5 10 51.0
  Extent = 5.3 (4.4-6.3)", rotation angle = 0
  Source counts = 80.9 +/- 12.2
  Background counts = 67.2
  Rate = 0.003 +/- 0.0005
[Wed Jun 20 12:56:36 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 12:56:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 12:56:36 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 12:56:36 2012] Source does appear to be extended
[Wed Jun 20 12:56:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 14:12:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 20 14:12:43 2012] Initial guess for spatial extent in simple fitting = 5.30"
[Wed Jun 20 14:12:43 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.017
[Wed Jun 20 14:12:43 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.30"
[Wed Jun 20 14:51:58 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun 20 14:51:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src4.csv
[Wed Jun 20 14:51:58 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun 20 14:51:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src4.csv
[Wed Jun 20 14:51:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 20 14:51:59 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun 20 14:51:59 2012] fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun 20 14:51:59 2012] Fit fullrun_mos1_xmm0111110301_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jun 20 15:24:43 2012] Warning, spatial fit 4 centroid is now closest to src. 27
[Wed Jun 20 15:24:43 2012] Vigneting correction estimate = 1.000000
[Wed Jun 20 15:24:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 20 15:24:43 2012] Assessing source extent using major axis lower bound
[Wed Jun 20 15:24:43 2012] Source does appear to be extended
[Wed Jun 20 15:24:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 20 16:08:22 2012] XMMSAS src. selection expression = ellipse(21039.732200, 23862.864100, 317.856609, 317.856609, 0.000000, X, Y)
[Wed Jun 20 16:08:22 2012] Writing source region out to fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src6_src.reg
[Wed Jun 20 16:08:22 2012] Extracting stamp from image fullrun_mos1_xmm0111110301_pi300-10000_cl_sm2.00.img.gz, (224, 257) - (261, 293)
[Wed Jun 20 16:08:22 2012] XMMSAS bgd. selection expression = annulus(21039.732200, 23862.864100, 529.761015, 1059.522030, X, Y) && !ellipse(21475.042000, 25108.544200, 319.732009, 319.732009, 0.000000, X, Y) && !ellipse(22203.517460, 25176.531380, 443.850413, 443.850413, 0.000000, X, Y)
[Wed Jun 20 16:08:22 2012] Writing fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src6.gif
[Wed Jun 20 16:08:55 2012] Mean detx,y = (2542.20, 2159.35) 
[Wed Jun 20 16:08:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 20 16:09:03 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 20 16:09:03 2012] Setting source spectrum file to fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jun 20 16:09:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jun 20 16:21:37 2012] Not generating rmf since there are only 80 counts
[Wed Jun 20 16:21:37 2012] rmf not generated due to insufficient counts
[Wed Jun 20 16:35:23 2012] Updating aperture counts using extracted products
[Wed Jun 20 16:35:23 2012] Error reading totcts from fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jun 20 16:35:24 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 20 16:35:24 2012] Using photon index=1.80, rate=0.00346, arf fullrun_mos1_xmm0111110301_pi300-10000_pass1_cl_src6.arf
[Wed Jun 20 16:35:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 20 16:35:24 2012] Updating source flux to 4.1e-14
[Wed Jun 20 16:35:26 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting