[Sun May 26 12:02:30 2013] Detection parameters:
  Position = (148.4, 196.9) = 2 27 17.85 -5 16 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.3 +/- 9.5
  Background counts = 12.9
  Rate = 0.004 +/- 0.0008

[Sun May 26 12:02:30 2013] Off-axis axis estimate = 13.13'
[Sun May 26 12:18:30 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Sun May 26 12:18:30 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Sun May 26 12:18:30 2013] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.987
[Sun May 26 12:18:30 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 13.00"
[Sun May 26 12:40:04 2013] fullrun_mos1_xmm0111110201_pi300-10000_cl_pass0_src11.ximg exists
[Sun May 26 12:40:04 2013] fullrun_mos1_xmm0111110201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May 26 12:40:04 2013] Fit fullrun_mos1_xmm0111110201_pi300-10000_cl_pass0_src11 appears to have run properly
[Sun May 26 12:40:04 2013] fullrun_mos1_xmm0111110201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May 26 12:40:04 2013] fullrun_mos1_xmm0111110201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 26 12:40:04 2013] Fit fullrun_mos1_xmm0111110201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 26 12:54:49 2013] Spatial fit model total counts = 132.541000, observed total counts = 120.000000
[Sun May 26 12:54:49 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 26 12:54:49 2013] Vigneting correction estimate = 1.000000
[Sun May 26 12:54:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 12:54:49 2013] Assessing source extent using major
[Sun May 26 12:54:49 2013] Source does appear to be extended
[Sun May 26 12:54:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 13:07:54 2013] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Sun May 26 13:07:54 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 26 13:07:54 2013] Initial guess for spatial extent in simple fitting = 13.00"
[Sun May 26 13:07:54 2013] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.987
[Sun May 26 13:07:54 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 13.00"
[Sun May 26 13:27:40 2013] fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_src11.ximg exists
[Sun May 26 13:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_src11.csv
[Sun May 26 13:27:40 2013] fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May 26 13:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_src11.csv
[Sun May 26 13:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 13:27:40 2013] fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May 26 13:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun May 26 13:27:40 2013] fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May 26 13:27:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun May 26 13:27:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111110201_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 26 13:40:21 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 16.554606 pixels away
[Sun May 26 13:40:21 2013] Vigneting correction estimate = 1.000000
[Sun May 26 13:40:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 26 13:40:21 2013] Assessing source extent using major
[Sun May 26 13:40:21 2013] Source does appear to be extended
[Sun May 26 13:40:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 13:46:25 2013] XMMSAS src. selection expression = ellipse(12862.575592, 17082.939804, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 13:46:25 2013] Writing source region out to fullrun_mos1_xmm0111110201_pi300-10000_pass1_cl_src11_src.reg
[Sun May 26 13:46:25 2013] Extracting stamp from image fullrun_mos1_xmm0111110201_pi300-10000_cl_sm2.00.img.gz, (111, 159) - (186, 234)
[Sun May 26 13:46:25 2013] XMMSAS bgd. selection expression = annulus(12862.575592, 17082.939804, 1087.500000, 2175.000000, X, Y)
[Sun May 26 13:46:25 2013] Writing fullrun_mos1_xmm0111110201_pi300-10000_pass1_cl_src11.gif
[Sun May 26 13:49:49 2013] Mean detx,y = (12021.43, 6926.99) 
[Sun May 26 13:49:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 13:50:16 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 13:50:16 2013] Setting source spectrum file to fullrun_mos1_xmm0111110201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 26 13:50:16 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111110201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun May 26 13:52:28 2013] Not generating rmf since there are only 45 counts
[Sun May 26 13:52:28 2013] rmf not generated due to insufficient counts
[Sun May 26 14:00:54 2013] Updating aperture counts using extracted products
[Sun May 26 14:00:54 2013] Total counts from fullrun_mos1_xmm0111110201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 77.00
[Sun May 26 14:00:54 2013] Total counts from fullrun_mos1_xmm0111110201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 370.00
[Sun May 26 14:00:54 2013] Got source and background scale factors 1125376.000000, 8629339.000000
[Sun May 26 14:00:54 2013] User source parameters:
  Position = (148.4, 196.9) = 2 27 17.85 -5 16 24.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 28.7 +/- 9.8
  Background aperture counts = 48.3
  Rate = 0.003 +/- 0.001

[Sun May 26 14:00:54 2013] Updating counts from extracted products
[Sun May 26 14:00:54 2013] Set source signif. to 28.75/6.95 = 4.14
[Sun May 26 14:00:55 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 14:00:55 2013] Using photon index=1.80, rate=0.00316, arf fullrun_mos1_xmm0111110201_pi300-10000_pass1_cl_src11.arf
[Sun May 26 14:00:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 14:00:55 2013] Updating source flux to 6.7e-14
[Sun May 26 14:00:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 14:01:00 2013] xmm0111110201/analysis//spectral/fullrun_mos1_xmm0111110201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete