[Sat Feb 25 18:00:57 2012] Detection parameters:
  Position = (259.8, 346.9) = 2 18 29.15 42 34 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.2 +/- 13.4
  Background counts = 44.6
  Rate = 0.002 +/- 0.0005

[Sat Feb 25 18:00:58 2012] Off-axis axis estimate = 4.49'
[Sat Feb 25 18:47:29 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 18:47:29 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Sat Feb 25 18:47:29 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Sat Feb 25 18:47:29 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.68"
[Sat Feb 25 19:33:58 2012] fullrun_mos2_xmm0111100101_pi300-10000_cl_pass0_src17.ximg exists
[Sat Feb 25 19:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111100101_pi300-10000_cl_pass0_src17.csv
[Sat Feb 25 19:33:58 2012] fullrun_mos2_xmm0111100101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Feb 25 19:33:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111100101_pi300-10000_cl_pass0_src17.csv
[Sat Feb 25 19:33:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111100101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111100101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 19:33:58 2012] fullrun_mos2_xmm0111100101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Feb 25 19:33:58 2012] fullrun_mos2_xmm0111100101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Feb 25 19:33:58 2012] Fit fullrun_mos2_xmm0111100101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Feb 25 19:34:12 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 10.795115 pixels away
[Sat Feb 25 19:34:12 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 19:34:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 19:34:12 2012] Assessing source extent using major
[Sat Feb 25 19:34:12 2012] Source does appear to be extended
[Sat Feb 25 19:34:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 20:17:47 2012] Using EEF radius (= 8.68 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 20:17:47 2012] Initial guess for spatial extent in simple fitting = 8.68"
[Sat Feb 25 20:17:47 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Sat Feb 25 20:17:47 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.68"
[Sat Feb 25 20:59:01 2012] fullrun_mos2_xmm0111100101_pi300-10000_cl_pass1_src17.ximg exists
[Sat Feb 25 20:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111100101_pi300-10000_cl_pass1_src17.csv
[Sat Feb 25 20:59:01 2012] fullrun_mos2_xmm0111100101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Feb 25 20:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111100101_pi300-10000_cl_pass1_src17.csv
[Sat Feb 25 20:59:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111100101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111100101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 20:59:02 2012] fullrun_mos2_xmm0111100101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Feb 25 20:59:02 2012] fullrun_mos2_xmm0111100101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Feb 25 20:59:02 2012] Fit fullrun_mos2_xmm0111100101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Feb 25 20:59:14 2012] Spatial fit model total counts = 169.000000, observed total counts = 169.000000
[Sat Feb 25 20:59:14 2012] Offset between fit and detection position for source 15 = 0.578734 pixels
[Sat Feb 25 20:59:14 2012] 173.333400 total counts/ 128.751000 bgd. counts: snr = 3.929055
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.578734 pixels
  Position = (259.3, 347.1) = 2 18 29.37 42 34 57.5
  Extent = 5.2 (3.6-6.9)", rotation angle = 0
  Source counts = 44.6 +/- 13.2
  Background counts = 128.8
  Rate = 0.001 +/- 0.0004
[Sat Feb 25 20:59:14 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 20:59:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 20:59:14 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 20:59:14 2012] Source does appear to be extended
[Sat Feb 25 20:59:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 21:41:06 2012] XMMSAS src. selection expression = ellipse(22506.734800, 30145.535040, 310.566009, 310.566009, 0.000000, X, Y)
[Sat Feb 25 21:41:06 2012] Writing source region out to fullrun_mos2_xmm0111100101_pi300-10000_pass1_cl_src15_src.reg
[Sat Feb 25 21:41:06 2012] Extracting stamp from image fullrun_mos2_xmm0111100101_pi300-10000_cl_sm2.00.img.gz, (241, 329) - (277, 365)
[Sat Feb 25 21:41:06 2012] XMMSAS bgd. selection expression = annulus(22506.734800, 30145.535040, 517.610015, 1035.220030, X, Y)
[Sat Feb 25 21:41:06 2012] Writing fullrun_mos2_xmm0111100101_pi300-10000_pass1_cl_src15.gif
[Sat Feb 25 21:47:59 2012] Mean detx,y = (6054.73, 768.63) 
[Sat Feb 25 21:48:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 25 21:48:23 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 25 21:48:24 2012] Setting source spectrum file to fullrun_mos2_xmm0111100101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Feb 25 21:48:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111100101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Feb 25 22:10:41 2012] Not generating rmf since there are only 44 counts
[Sat Feb 25 22:10:41 2012] rmf not generated due to insufficient counts
[Sat Feb 25 22:12:29 2012] Updating aperture counts using extracted products
[Sat Feb 25 22:12:29 2012] Error reading totcts from fullrun_mos2_xmm0111100101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Feb 25 22:12:30 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 25 22:12:30 2012] Using photon index=1.80, rate=0.00144, arf fullrun_mos2_xmm0111100101_pi300-10000_pass1_cl_src15.arf
[Sat Feb 25 22:12:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 25 22:12:30 2012] Updating source flux to 2.3e-14
[Sat Feb 25 22:13:34 2012] Source 15 has fewer than 100.000000 counts, skipping spectral fitting