[Mon Jun 10 19:48:56 2013] Detection parameters:
  Position = (283.9, 359.2) = 15 3 40.02 -41 57 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 166.0 +/- 27.6
  Background counts = 262.9
  Rate = 0.02 +/- 0.003

[Mon Jun 10 19:49:03 2013] Off-axis axis estimate = 4.53'
[Mon Jun 10 19:50:46 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:46 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Mon Jun 10 19:50:46 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.001
[Mon Jun 10 19:50:46 2013] Giving source the simple spatial ID 92 for pass 0, mean size = 8.69"
[Mon Jun 10 19:50:49 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src92.ximg exists
[Mon Jun 10 19:50:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src92.csv
[Mon Jun 10 19:50:49 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src92_1.ximg exists
[Mon Jun 10 19:50:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src92.csv
[Mon Jun 10 19:50:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:51 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Mon Jun 10 19:50:51 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Mon Jun 10 19:50:51 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src92 appears to have run properly
[Mon Jun 10 19:51:29 2013] Spatial fit model total counts = 3866.060000, observed total counts = 3854.000000
[Mon Jun 10 19:51:29 2013] Offset between fit and detection position for source 99 = 4.688148 pixels
[Mon Jun 10 19:51:29 2013] Warning, changing simple spatial fit ID from 92 to 86
[Mon Jun 10 19:51:29 2013] 3780.588000 total counts/ 3554.490000 bgd. counts: snr = 3.792347
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 4.688148 pixels
  Position = (282.1, 363.5) = 15 3 40.75 -41 57 39.2
  Extent = 14.1 (7.7-17.3)", rotation angle = 0
  Source counts = 226.1 +/- 61.5
  Background counts = 3554.5
  Rate = 0.02 +/- 0.005
[Mon Jun 10 19:51:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:29 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:51:29 2013] Source does appear to be extended
[Mon Jun 10 19:51:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:51:29 2013] Source is confused with source 90
[Mon Jun 10 19:52:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:52:58 2013] Initial guess for spatial extent in simple fitting = 14.09"
[Mon Jun 10 19:52:58 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.002
[Mon Jun 10 19:52:58 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 14.09"
[Mon Jun 10 19:53:01 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src72.ximg exists
[Mon Jun 10 19:53:01 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src72_1.ximg exists
[Mon Jun 10 19:53:01 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src72 appears to have run properly
[Mon Jun 10 19:53:04 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Mon Jun 10 19:53:04 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Mon Jun 10 19:53:04 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Mon Jun 10 19:53:47 2013] Spatial fit model total counts = 3871.960000, observed total counts = 3854.000000
[Mon Jun 10 19:53:47 2013] Offset between fit and detection position for source 99 = 1.809264 pixels
[Mon Jun 10 19:53:47 2013] Warning, changing simple spatial fit ID from 72 to 66
[Mon Jun 10 19:53:47 2013] 3863.429000 total counts/ 3388.980000 bgd. counts: snr = 8.149952
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 1.809264 pixels
  Position = (282.1, 361.7) = 15 3 40.75 -41 57 47.0
  Extent = 17.3 (17.2-34.6)", rotation angle = 0
  Source counts = 474.4 +/- 62.2
  Background counts = 3389.0
  Rate = 0.04 +/- 0.005
[Mon Jun 10 19:53:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:53:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:53:47 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:53:47 2013] Source does appear to be extended
[Mon Jun 10 19:53:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:08 2013] XMMSAS src. selection expression = ellipse(24490.398000, 31422.816000, 1036.650030, 1036.650030, 0.000000, X, Y)
[Mon Jun 10 19:55:08 2013] Not overwriting source region fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src99_src.reg
[Mon Jun 10 19:55:08 2013] Extracting stamp from image fullrun_pn_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (222, 302) - (342, 421)
[Mon Jun 10 19:55:08 2013] XMMSAS bgd. selection expression = annulus(24490.398000, 31422.816000, 1727.750050, 3455.500099, X, Y) && !ellipse(21154.484000, 36005.544000, 2361.256068, 2361.256068, 0.000000, X, Y) && !ellipse(20482.968994, 35450.946228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27301.840912, 35342.164368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19534.322000, 35228.166000, 1770.904051, 1572.064045, 91.170000, X, Y) && !ellipse(24222.851227, 34831.973938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28187.173706, 34585.300476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27380.161621, 34222.273010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28392.601288, 33901.882660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.682000, 33209.880000, 1487.216043, 1487.216043, 0.000000, X, Y) && !ellipse(28699.716492, 33188.940918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26283.477875, 33293.934052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28106.158142, 32591.646942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27247.548218, 32664.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.504400, 32469.025400, 808.192023, 808.192023, 0.000000, X, Y) && !ellipse(26129.167572, 32054.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25736.507324, 32210.599792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28813.956000, 31387.503400, 1379.664040, 1379.664040, 347.380000, X, Y) && !ellipse(27937.667328, 31434.792267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.900000, 32038.980200, 1584.544046, 1584.544046, 0.000000, X, Y) && !ellipse(24295.708000, 31464.695000, 1391.176040, 1391.176040, 0.000000, X, Y) && !ellipse(22129.934113, 31257.433655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25240.927521, 31176.906616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.456879, 31455.451050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21530.064180, 31284.279600, 1144.256033, 1144.256033, 0.000000, X, Y) && !ellipse(25833.994690, 31181.244934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27171.898000, 31131.066000, 866.416025, 866.416025, 0.000000, X, Y) && !ellipse(27703.140625, 30676.953979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22357.812622, 30516.736237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28366.304000, 30715.304000, 1323.608038, 1323.608038, 0.000000, X, Y) && !ellipse(26506.513611, 30692.069061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25897.967621, 30395.669556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27686.299774, 29971.348083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.935883, 29977.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28104.881073, 29598.871368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27585.496277, 29498.803314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.316559, 29789.813110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26798.091583, 29464.460510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22441.621277, 29197.064545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21743.922000, 29370.930800, 1386.904040, 1386.904040, 0.000000, X, Y) && !ellipse(23048.587524, 28273.791382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22139.570541, 27881.237335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21309.803528, 27962.595398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20555.479172, 27555.563477, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:08 2013] Writing fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src99.gif