[Mon Jun 10 19:48:56 2013] Detection parameters:
  Position = (225.0, 370.0) = 15 4 3.01 -41 57 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 352.2 +/- 33.1
  Background counts = 249.1
  Rate = 0.06 +/- 0.005

[Mon Jun 10 19:49:03 2013] Off-axis axis estimate = 7.44'
[Mon Jun 10 19:50:46 2013] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:46 2013] Initial guess for spatial extent in simple fitting = 10.15"
[Mon Jun 10 19:50:46 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.122
[Mon Jun 10 19:50:46 2013] Giving source the simple spatial ID 82 for pass 0, mean size = 10.15"
[Mon Jun 10 19:50:49 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src82.ximg exists
[Mon Jun 10 19:50:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src82.csv
[Mon Jun 10 19:50:49 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src82_1.ximg exists
[Mon Jun 10 19:50:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src82.csv
[Mon Jun 10 19:50:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:51 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Mon Jun 10 19:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src82.csv
[Mon Jun 10 19:50:51 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Mon Jun 10 19:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src82.csv
[Mon Jun 10 19:50:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:51:29 2013] Spatial fit model total counts = 3930.420000, observed total counts = 3928.000000
[Mon Jun 10 19:51:29 2013] Offset between fit and detection position for source 88 = 1.207596 pixels
[Mon Jun 10 19:51:29 2013] Warning, changing simple spatial fit ID from 82 to 78
[Mon Jun 10 19:51:29 2013] 3937.335000 total counts/ 3139.450000 bgd. counts: snr = 14.240116
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 1.207596 pixels
  Position = (225.3, 368.8) = 15 4 2.88 -41 57 16.0
  Extent = 19.8 (19.8-39.6)", rotation angle = 0
  Source counts = 797.9 +/- 62.7
  Background counts = 3139.4
  Rate = 0.07 +/- 0.005
[Mon Jun 10 19:51:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:29 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:51:29 2013] Source does appear to be extended
[Mon Jun 10 19:51:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:51:29 2013] Source is confused with source 84
[Mon Jun 10 19:52:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:52:58 2013] Initial guess for spatial extent in simple fitting = 19.81"
[Mon Jun 10 19:52:58 2013] source mask rpix=4.6, npix_max = 102, mask sum = 97, frac = 0.950
[Mon Jun 10 19:52:58 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 19.81"
[Mon Jun 10 19:53:01 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src63.ximg exists
[Mon Jun 10 19:53:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src63.csv
[Mon Jun 10 19:53:01 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src63_1.ximg exists
[Mon Jun 10 19:53:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src63.csv
[Mon Jun 10 19:53:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:03 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Mon Jun 10 19:53:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src63.csv
[Mon Jun 10 19:53:03 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Mon Jun 10 19:53:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src63.csv
[Mon Jun 10 19:53:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:47 2013] Spatial fit model total counts = 10988.700000, observed total counts = 9759.000000
[Mon Jun 10 19:53:47 2013] Poor agreement between spatial fit and data for source 88
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 19:53:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:53:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:53:47 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:53:47 2013] Source does appear to be extended
[Mon Jun 10 19:53:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:07 2013] XMMSAS src. selection expression = ellipse(19551.900000, 32038.980200, 1188.408034, 1188.408034, 0.000000, X, Y)
[Mon Jun 10 19:55:07 2013] Not overwriting source region fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src88_src.reg
[Mon Jun 10 19:55:07 2013] Extracting stamp from image fullrun_pn_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (157, 301) - (294, 437)
[Mon Jun 10 19:55:07 2013] XMMSAS bgd. selection expression = annulus(19551.900000, 32038.980200, 1980.680057, 3961.360114, X, Y) && !ellipse(18099.469000, 36756.258000, 1093.168031, 1093.168031, 0.000000, X, Y) && !ellipse(18215.075012, 37219.200002, 1999.584058, 880.459953, 290.036731, X, Y) && !ellipse(19230.958069, 35887.863159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21154.484000, 36005.544000, 2361.256068, 2361.256068, 0.000000, X, Y) && !ellipse(20482.968994, 35450.946228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19534.322000, 35228.166000, 1770.904051, 1572.064045, 91.170000, X, Y) && !ellipse(18320.916245, 35205.714447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.851227, 34831.973938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18876.322800, 34795.352400, 651.984019, 651.984019, 0.000000, X, Y) && !ellipse(17650.891724, 34912.477081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18645.189575, 34150.175690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17956.247971, 33956.045258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17324.247452, 33615.402344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19399.894600, 33763.868600, 493.801614, 493.801614, 0.000000, X, Y) && !ellipse(18646.965790, 33720.018463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17047.904000, 33240.958000, 1423.288041, 1423.288041, 0.000000, X, Y) && !ellipse(18037.807816, 33094.419220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18777.143204, 33289.250580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20086.129730, 31879.246826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17981.753510, 32574.986633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24295.708000, 31464.695000, 1391.176040, 1391.176040, 0.000000, X, Y) && !ellipse(22129.934113, 31257.433655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21530.064180, 31284.279600, 1144.256033, 1144.256033, 0.000000, X, Y) && !ellipse(19259.487686, 31113.422211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24490.398000, 31422.816000, 1382.200040, 1382.200040, 0.000000, X, Y) && !ellipse(18303.989105, 30837.012421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17842.244995, 31119.276550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22357.812622, 30516.736237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19958.450699, 30584.930664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18850.044998, 30402.519531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17405.548431, 29956.920654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18768.288681, 29442.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19722.508865, 29298.945984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18191.464981, 30154.927429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17572.551102, 29534.497528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22441.621277, 29197.064545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21743.922000, 29370.930800, 1386.904040, 1386.904040, 0.000000, X, Y) && !ellipse(17740.201599, 28748.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19958.203781, 28855.285278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18760.404572, 28747.151245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23048.587524, 28273.791382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22139.570541, 27881.237335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21309.803528, 27962.595398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20555.479172, 27555.563477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19854.851456, 27688.437073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17980.757874, 27522.226929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15054.469543, 27370.940704, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:07 2013] Writing fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src88.gif