[Mon Jun 10 19:48:55 2013] Detection parameters:
  Position = (282.6, 373.9) = 15 3 40.55 -41 56 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.1 +/- 28.6
  Background counts = 276.1
  Rate = 0.02 +/- 0.003

[Mon Jun 10 19:49:03 2013] Off-axis axis estimate = 5.59'
[Mon Jun 10 19:50:46 2013] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:46 2013] Initial guess for spatial extent in simple fitting = 9.23"
[Mon Jun 10 19:50:46 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.092
[Mon Jun 10 19:50:46 2013] Giving source the simple spatial ID 73 for pass 0, mean size = 9.23"
[Mon Jun 10 19:50:49 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src73.ximg exists
[Mon Jun 10 19:50:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src73.csv
[Mon Jun 10 19:50:49 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src73_1.ximg exists
[Mon Jun 10 19:50:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src73.csv
[Mon Jun 10 19:50:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:51 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Mon Jun 10 19:50:51 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Mon Jun 10 19:50:51 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Mon Jun 10 19:51:28 2013] Warning: source 73 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 10.873691 pixels away
[Mon Jun 10 19:51:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:29 2013] Assessing source extent using major
[Mon Jun 10 19:51:29 2013] Source does appear to be extended
[Mon Jun 10 19:51:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:52:58 2013] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:52:58 2013] Initial guess for spatial extent in simple fitting = 9.23"
[Mon Jun 10 19:52:58 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.092
[Mon Jun 10 19:52:58 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 9.23"
[Mon Jun 10 19:53:00 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src57.ximg exists
[Mon Jun 10 19:53:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src57.csv
[Mon Jun 10 19:53:00 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src57_1.ximg exists
[Mon Jun 10 19:53:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src57.csv
[Mon Jun 10 19:53:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:03 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Mon Jun 10 19:53:03 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Mon Jun 10 19:53:03 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Mon Jun 10 19:53:46 2013] Spatial fit model total counts = 3300.340000, observed total counts = 3301.000000
[Mon Jun 10 19:53:46 2013] Offset between fit and detection position for source 77 = 0.399284 pixels
[Mon Jun 10 19:53:46 2013] 3310.425000 total counts/ 3051.980000 bgd. counts: snr = 4.678184
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.399284 pixels
  Position = (282.9, 373.8) = 15 3 40.41 -41 56 54.7
  Extent = 10.1 (7.3-14.0)", rotation angle = 0
  Source counts = 258.4 +/- 57.5
  Background counts = 3052.0
  Rate = 0.02 +/- 0.005
[Mon Jun 10 19:53:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:53:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:53:47 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:53:47 2013] Source does appear to be extended
[Mon Jun 10 19:53:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:53:47 2013] Source is confused with source 90
[Mon Jun 10 19:55:07 2013] XMMSAS src. selection expression = ellipse(24565.504400, 32469.025400, 606.144017, 606.144017, 0.000000, X, Y)
[Mon Jun 10 19:55:07 2013] Not overwriting source region fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src77_src.reg
[Mon Jun 10 19:55:07 2013] Extracting stamp from image fullrun_pn_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (248, 339) - (318, 409)
[Mon Jun 10 19:55:07 2013] XMMSAS bgd. selection expression = annulus(24565.504400, 32469.025400, 1010.240029, 2020.480058, X, Y) && !ellipse(21154.484000, 36005.544000, 2361.256068, 2361.256068, 0.000000, X, Y) && !ellipse(27301.840912, 35342.164368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.851227, 34831.973938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27380.161621, 34222.273010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.682000, 33209.880000, 1487.216043, 1487.216043, 0.000000, X, Y) && !ellipse(26283.477875, 33293.934052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27247.548218, 32664.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26129.167572, 32054.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25736.507324, 32210.599792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24295.708000, 31464.695000, 1391.176040, 1391.176040, 0.000000, X, Y) && !ellipse(22129.934113, 31257.433655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25240.927521, 31176.906616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.456879, 31455.451050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21530.064180, 31284.279600, 1144.256033, 1144.256033, 0.000000, X, Y) && !ellipse(25833.994690, 31181.244934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24490.398000, 31422.816000, 1382.200040, 1382.200040, 0.000000, X, Y) && !ellipse(27171.898000, 31131.066000, 866.416025, 866.416025, 0.000000, X, Y) && !ellipse(22357.812622, 30516.736237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26506.513611, 30692.069061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25897.967621, 30395.669556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.935883, 29977.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.316559, 29789.813110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21743.922000, 29370.930800, 1386.904040, 1386.904040, 0.000000, X, Y)
[Mon Jun 10 19:55:07 2013] Writing fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src77.gif