[Mon Jun 10 19:48:54 2013] Detection parameters:
  Position = (199.7, 386.9) = 15 4 12.85 -41 55 55.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 486.9 +/- 32.8
  Background counts = 122.8
  Rate = 0.04 +/- 0.003

[Mon Jun 10 19:49:03 2013] Off-axis axis estimate = 9.61'
[Mon Jun 10 19:50:46 2013] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:46 2013] Initial guess for spatial extent in simple fitting = 11.24"
[Mon Jun 10 19:50:46 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.947
[Mon Jun 10 19:50:46 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 11.24"
[Mon Jun 10 19:50:48 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src55.ximg exists
[Mon Jun 10 19:50:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src55.csv
[Mon Jun 10 19:50:48 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src55_1.ximg exists
[Mon Jun 10 19:50:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src55.csv
[Mon Jun 10 19:50:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:51 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Mon Jun 10 19:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src55.csv
[Mon Jun 10 19:50:51 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Mon Jun 10 19:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src55.csv
[Mon Jun 10 19:50:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:51:28 2013] Warning, spatial fit 55 centroid is now closest to src. 66
[Mon Jun 10 19:51:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:29 2013] Assessing source extent using major
[Mon Jun 10 19:51:29 2013] Source does appear to be extended
[Mon Jun 10 19:51:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:51:29 2013] Source is confused with source 66
[Mon Jun 10 19:52:58 2013] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:52:58 2013] Initial guess for spatial extent in simple fitting = 11.24"
[Mon Jun 10 19:52:58 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.947
[Mon Jun 10 19:52:58 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 11.24"
[Mon Jun 10 19:53:00 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src45.ximg exists
[Mon Jun 10 19:53:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src45.csv
[Mon Jun 10 19:53:00 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src45_1.ximg exists
[Mon Jun 10 19:53:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src45.csv
[Mon Jun 10 19:53:00 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:03 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Mon Jun 10 19:53:03 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Mon Jun 10 19:53:03 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Mon Jun 10 19:53:46 2013] Warning, spatial fit 45 centroid is now closest to src. 66
[Mon Jun 10 19:53:46 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 17.819135 pixels away
[Mon Jun 10 19:53:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:53:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:53:47 2013] Assessing source extent using major
[Mon Jun 10 19:53:47 2013] Source does appear to be extended
[Mon Jun 10 19:53:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:06 2013] XMMSAS src. selection expression = ellipse(17324.247452, 33615.402344, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 19:55:06 2013] Not overwriting source region fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src58_src.reg
[Mon Jun 10 19:55:06 2013] Extracting stamp from image fullrun_pn_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (162, 349) - (237, 424)
[Mon Jun 10 19:55:06 2013] XMMSAS bgd. selection expression = annulus(17324.247452, 33615.402344, 1087.500000, 2175.000000, X, Y) && !ellipse(18099.469000, 36756.258000, 1093.168031, 1093.168031, 0.000000, X, Y) && !ellipse(18215.075012, 37219.200002, 1999.584058, 880.459953, 290.036731, X, Y) && !ellipse(19230.958069, 35887.863159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21154.484000, 36005.544000, 2361.256068, 2361.256068, 0.000000, X, Y) && !ellipse(19534.322000, 35228.166000, 1770.904051, 1572.064045, 91.170000, X, Y) && !ellipse(18320.916245, 35205.714447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18876.322800, 34795.352400, 651.984019, 651.984019, 0.000000, X, Y) && !ellipse(17650.891724, 34912.477081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18645.189575, 34150.175690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17956.247971, 33956.045258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19399.894600, 33763.868600, 493.801614, 493.801614, 0.000000, X, Y) && !ellipse(18646.965790, 33720.018463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17047.904000, 33240.958000, 1423.288041, 1423.288041, 0.000000, X, Y) && !ellipse(18037.807816, 33094.419220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18777.143204, 33289.250580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20086.129730, 31879.246826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17981.753510, 32574.986633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.900000, 32038.980200, 1584.544046, 1584.544046, 0.000000, X, Y) && !ellipse(19259.487686, 31113.422211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18303.989105, 30837.012421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17842.244995, 31119.276550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19958.450699, 30584.930664, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:06 2013] Writing fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src58.gif