[Mon Jun 10 19:48:52 2013] Detection parameters:
  Position = (208.0, 420.0) = 15 4 9.60 -41 53 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1265.0 +/- 49.6
  Background counts = 168.0
  Rate = 0.1 +/- 0.004

[Mon Jun 10 19:49:03 2013] Off-axis axis estimate = 10.98'
[Mon Jun 10 19:50:46 2013] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:46 2013] Initial guess for spatial extent in simple fitting = 11.92"
[Mon Jun 10 19:50:46 2013] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.857
[Mon Jun 10 19:50:46 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.92"
[Mon Jun 10 19:50:47 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 10 19:50:47 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 10 19:50:47 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon Jun 10 19:50:49 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 10 19:50:49 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 10 19:50:49 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jun 10 19:51:28 2013] Warning, spatial fit 3 centroid is now closest to src. 1
[Mon Jun 10 19:51:28 2013] Spatial fit model total counts = 6548.020000, observed total counts = 6478.000000
[Mon Jun 10 19:51:28 2013] Offset between fit and detection position for source 3 = 4.281189 pixels
[Mon Jun 10 19:51:28 2013] Warning, changing simple spatial fit ID from 3 to 10
[Mon Jun 10 19:51:28 2013] 6861.500000 total counts/ 4698.000000 bgd. counts: snr = 31.564607
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.281189 pixels
  Position = (208.5, 424.2) = 15 4 9.40 -41 53 14.8
  Extent = 24.2 (22.9-48.5)" x 13.5 (13.5-13.5)", rotation angle = 90 (90-90) degrees
  Source counts = 2163.5 +/- 82.8
  Background counts = 4698.0
  Rate = 0.2 +/- 0.007
[Mon Jun 10 19:51:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:29 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:51:29 2013] Source does appear to be extended
[Mon Jun 10 19:51:29 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.70
[Mon Jun 10 19:51:29 2013] Source is asymmetric
[Mon Jun 10 19:51:29 2013] Source is confused with source 1
[Mon Jun 10 19:52:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:52:58 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:52:58 2013] Initial guess for spatial extent in simple fitting = 18.87"
[Mon Jun 10 19:52:58 2013] source mask rpix=4.3, npix_max = 93, mask sum = 90, frac = 0.961
[Mon Jun 10 19:52:58 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 18.87"
[Mon Jun 10 19:52:59 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 10 19:52:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 19:52:59 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 10 19:52:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 19:52:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:02 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 10 19:53:02 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 10 19:53:02 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jun 10 19:53:46 2013] Spatial fit model total counts = 14958.700000, observed total counts = 14692.000000
[Mon Jun 10 19:53:46 2013] Offset between fit and detection position for source 3 = 1.203996 pixels
[Mon Jun 10 19:53:46 2013] Warning, changing simple spatial fit ID from 3 to 1
[Mon Jun 10 19:53:46 2013] 13557.250000 total counts/ 12137.100000 bgd. counts: snr = 12.890707
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.203996 pixels
  Position = (208.6, 423.0) = 15 4 9.36 -41 53 20.0
  Extent = 13.7 (12.8-15.0)", rotation angle = 0
  Source counts = 1420.2 +/- 116.4
  Background counts = 12137.1
  Rate = 0.1 +/- 0.01
[Mon Jun 10 19:53:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:53:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:53:47 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:53:47 2013] Source does appear to be extended
[Mon Jun 10 19:53:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:01 2013] Counts = 1420.150000, rescaling region sizes by 2.000000
[Mon Jun 10 19:55:01 2013] XMMSAS src. selection expression = ellipse(18099.469000, 36756.258000, 1639.752047, 1639.752047, 0.000000, X, Y)
[Mon Jun 10 19:55:01 2013] Not overwriting source region fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 10 19:55:01 2013] Extracting stamp from image fullrun_pn_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (114, 329) - (303, 517)
[Mon Jun 10 19:55:01 2013] XMMSAS bgd. selection expression = annulus(18099.469000, 36756.258000, 5465.840157, 10931.680315, X, Y) && !ellipse(18487.076000, 37748.710000, 1416.616041, 1416.616041, 0.000000, X, Y) && !ellipse(18644.493200, 38505.608000, 1999.584058, 742.284021, 292.947000, X, Y) && !ellipse(18936.419086, 39233.509801, 2038.320059, 959.659870, 113.798034, X, Y) && !ellipse(20301.257462, 42245.150269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19176.734406, 40922.759827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19323.933212, 40217.079590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18467.232800, 38035.605200, 1982.704057, 742.868021, 113.462000, X, Y) && !ellipse(26024.362946, 37879.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18215.075012, 37219.200002, 1999.584058, 880.459953, 290.036731, X, Y) && !ellipse(20590.379532, 42751.875885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21754.386856, 41963.873810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21075.615341, 41706.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21550.548309, 41358.750153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21034.735855, 41020.188782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24216.109400, 40050.575600, 1029.736030, 1029.736030, 0.000000, X, Y) && !ellipse(21225.264740, 39796.549500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20722.427414, 40504.640503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21713.367981, 39451.151428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21191.430374, 39284.208496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21317.463287, 38154.148376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22499.354000, 37885.772000, 1880.560054, 1880.560054, 0.000000, X, Y) && !ellipse(19694.775757, 37799.255920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29396.390869, 36327.966125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19230.958069, 35887.863159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21154.484000, 36005.544000, 2361.256068, 2361.256068, 0.000000, X, Y) && !ellipse(20482.968994, 35450.946228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27301.840912, 35342.164368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19534.322000, 35228.166000, 1770.904051, 1572.064045, 91.170000, X, Y) && !ellipse(18320.916245, 35205.714447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.851227, 34831.973938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18876.322800, 34795.352400, 651.984019, 651.984019, 0.000000, X, Y) && !ellipse(28187.173706, 34585.300476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17650.891724, 34912.477081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27380.161621, 34222.273010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29726.788025, 33977.083710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18645.189575, 34150.175690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17956.247971, 33956.045258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28392.601288, 33901.882660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17324.247452, 33615.402344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19399.894600, 33763.868600, 493.801614, 493.801614, 0.000000, X, Y) && !ellipse(18646.965790, 33720.018463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27614.682000, 33209.880000, 1487.216043, 1487.216043, 0.000000, X, Y) && !ellipse(28699.716492, 33188.940918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26283.477875, 33293.934052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17047.904000, 33240.958000, 1423.288041, 1423.288041, 0.000000, X, Y) && !ellipse(18037.807816, 33094.419220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18777.143204, 33289.250580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29293.718000, 32774.464200, 847.160024, 847.160024, 0.000000, X, Y) && !ellipse(28106.158142, 32591.646942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27247.548218, 32664.933716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24565.504400, 32469.025400, 808.192023, 808.192023, 0.000000, X, Y) && !ellipse(26129.167572, 32054.353973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29002.732330, 32401.812347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25736.507324, 32210.599792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28813.956000, 31387.503400, 1379.664040, 1379.664040, 347.380000, X, Y) && !ellipse(20086.129730, 31879.246826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17981.753510, 32574.986633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27937.667328, 31434.792267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.900000, 32038.980200, 1584.544046, 1584.544046, 0.000000, X, Y) && !ellipse(24295.708000, 31464.695000, 1391.176040, 1391.176040, 0.000000, X, Y) && !ellipse(22129.934113, 31257.433655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25240.927521, 31176.906616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.456879, 31455.451050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21530.064180, 31284.279600, 1144.256033, 1144.256033, 0.000000, X, Y) && !ellipse(25833.994690, 31181.244934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19259.487686, 31113.422211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30233.696000, 31832.612800, 1541.184044, 1541.184044, 0.000000, X, Y) && !ellipse(24490.398000, 31422.816000, 1382.200040, 1382.200040, 0.000000, X, Y) && !ellipse(18303.989105, 30837.012421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27171.898000, 31131.066000, 866.416025, 866.416025, 0.000000, X, Y) && !ellipse(17842.244995, 31119.276550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27703.140625, 30676.953979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22357.812622, 30516.736237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28366.304000, 30715.304000, 1323.608038, 1323.608038, 0.000000, X, Y) && !ellipse(26506.513611, 30692.069061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30090.172000, 30453.580000, 1438.640041, 1438.640041, 0.000000, X, Y) && !ellipse(19958.450699, 30584.930664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25897.967621, 30395.669556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18850.044998, 30402.519531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27686.299774, 29971.348083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28851.451416, 29960.738586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17405.548431, 29956.920654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.935883, 29977.162598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28104.881073, 29598.871368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18768.288681, 29442.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27585.496277, 29498.803314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.316559, 29789.813110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19722.508865, 29298.945984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18191.464981, 30154.927429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26798.091583, 29464.460510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17572.551102, 29534.497528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22441.621277, 29197.064545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21743.922000, 29370.930800, 1386.904040, 1386.904040, 0.000000, X, Y) && !ellipse(17740.201599, 28748.032715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29220.009308, 28747.212311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19958.203781, 28855.285278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18760.404572, 28747.151245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23048.587524, 28273.791382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22139.570541, 27881.237335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21309.803528, 27962.595398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20555.479172, 27555.563477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19854.851456, 27688.437073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17980.757874, 27522.226929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15054.469543, 27370.940704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23825.526093, 27080.230927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22133.316620, 27056.322388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19070.330124, 27070.810883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28913.342804, 26939.933868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28325.782166, 26999.597687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20624.401077, 26637.932251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18171.739441, 27008.014130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20306.061737, 26477.905670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21175.352844, 26216.356079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23870.045624, 26495.999695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20465.501556, 25973.075745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10704.730400, 26238.698151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18648.152588, 26002.307617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16805.582169, 25598.413940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21241.946289, 25795.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23499.082275, 25451.296112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20899.132889, 24993.478790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.835449, 25429.848785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19690.039185, 25364.609406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18854.642181, 25014.634064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19984.194000, 42540.590000, 2114.984061, 2114.984061, 0.000000, X, Y)
[Mon Jun 10 19:55:01 2013] Writing fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src3.gif