[Mon Jun 10 19:48:53 2013] Detection parameters:
  Position = (281.4, 460.3) = 15 3 40.99 -41 50 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.8 +/- 23.5
  Background counts = 172.3
  Rate = 0.01 +/- 0.002

[Mon Jun 10 19:49:03 2013] Off-axis axis estimate = 11.80'
[Mon Jun 10 19:50:46 2013] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:46 2013] Initial guess for spatial extent in simple fitting = 12.33"
[Mon Jun 10 19:50:46 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.102
[Mon Jun 10 19:50:46 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 12.33"
[Mon Jun 10 19:50:48 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src20.ximg exists
[Mon Jun 10 19:50:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src20.csv
[Mon Jun 10 19:50:48 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src20_1.ximg exists
[Mon Jun 10 19:50:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src20.csv
[Mon Jun 10 19:50:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:50 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Mon Jun 10 19:50:50 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Jun 10 19:50:50 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Jun 10 19:51:28 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 14.586380 pixels away
[Mon Jun 10 19:51:29 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:29 2013] Assessing source extent using major
[Mon Jun 10 19:51:29 2013] Source does appear to be extended
[Mon Jun 10 19:51:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:52:58 2013] Using EEF radius (= 12.33 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:52:58 2013] Initial guess for spatial extent in simple fitting = 12.33"
[Mon Jun 10 19:52:58 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.102
[Mon Jun 10 19:52:58 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 12.33"
[Mon Jun 10 19:52:59 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src17.ximg exists
[Mon Jun 10 19:52:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src17.csv
[Mon Jun 10 19:52:59 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon Jun 10 19:52:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src17.csv
[Mon Jun 10 19:52:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:02 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon Jun 10 19:53:02 2013] fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon Jun 10 19:53:02 2013] Fit fullrun_pn_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon Jun 10 19:53:46 2013] Spatial fit model total counts = 2327.280000, observed total counts = 2198.000000
[Mon Jun 10 19:53:46 2013] Offset between fit and detection position for source 22 = 2.565903 pixels
[Mon Jun 10 19:53:46 2013] 2334.563000 total counts/ 2166.690000 bgd. counts: snr = 3.606471
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.565903 pixels
  Position = (278.9, 460.9) = 15 3 41.96 -41 50 35.6
  Extent = 12.9 (4.8-24.7)", rotation angle = 0
  Source counts = 167.9 +/- 48.3
  Background counts = 2166.7
  Rate = 0.01 +/- 0.004
[Mon Jun 10 19:53:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:53:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:53:47 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:53:47 2013] Source does appear to be extended
[Mon Jun 10 19:53:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:03 2013] XMMSAS src. selection expression = ellipse(24216.109400, 40050.575600, 772.302022, 772.302022, 0.000000, X, Y)
[Mon Jun 10 19:55:03 2013] Not overwriting source region fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src22_src.reg
[Mon Jun 10 19:55:03 2013] Extracting stamp from image fullrun_pn_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (235, 417) - (323, 505)
[Mon Jun 10 19:55:03 2013] XMMSAS bgd. selection expression = annulus(24216.109400, 40050.575600, 1287.170037, 2574.340074, X, Y) && !ellipse(26024.362946, 37879.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21754.386856, 41963.873810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21075.615341, 41706.104980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21550.548309, 41358.750153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21034.735855, 41020.188782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21225.264740, 39796.549500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21713.367981, 39451.151428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21191.430374, 39284.208496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21317.463287, 38154.148376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22499.354000, 37885.772000, 1880.560054, 1880.560054, 0.000000, X, Y) && !ellipse(21154.484000, 36005.544000, 2361.256068, 2361.256068, 0.000000, X, Y) && !ellipse(19984.194000, 42540.590000, 2114.984061, 2114.984061, 0.000000, X, Y)
[Mon Jun 10 19:55:03 2013] Writing fullrun_pn_xmm0111090601_pi300-10000_pass1_cl_src22.gif