[Mon Jun 10 19:49:12 2013] Detection parameters:
  Position = (274.4, 305.2) = 15 3 43.73 -42 1 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.2 +/- 25.4
  Background counts = 143.4
  Rate = 0.01 +/- 0.002

[Mon Jun 10 19:49:15 2013] Off-axis axis estimate = 1.81'
[Mon Jun 10 19:50:57 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:57 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Mon Jun 10 19:50:57 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Mon Jun 10 19:50:57 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 7.33"
[Mon Jun 10 19:50:58 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src25.ximg exists
[Mon Jun 10 19:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src25.csv
[Mon Jun 10 19:50:58 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Jun 10 19:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src25.csv
[Mon Jun 10 19:50:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:51:00 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Jun 10 19:51:00 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Jun 10 19:51:00 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Mon Jun 10 19:52:07 2013] Spatial fit model total counts = 1757.770000, observed total counts = 1756.000000
[Mon Jun 10 19:52:07 2013] Offset between fit and detection position for source 93 = 1.201529 pixels
[Mon Jun 10 19:52:07 2013] 1773.950000 total counts/ 1476.490000 bgd. counts: snr = 7.741290
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 1.201529 pixels
  Position = (273.8, 306.2) = 15 3 43.97 -42 1 48.6
  Extent = 14.7 (14.6-29.3)", rotation angle = 0
  Source counts = 297.5 +/- 42.1
  Background counts = 1476.5
  Rate = 0.02 +/- 0.003
[Mon Jun 10 19:52:07 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:52:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:52:07 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:52:07 2013] Source does appear to be extended
[Mon Jun 10 19:52:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:52:07 2013] Source is confused with source 91
[Mon Jun 10 19:52:07 2013] Source is confused with source 92
[Mon Jun 10 19:53:10 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:10 2013] Initial guess for spatial extent in simple fitting = 14.66"
[Mon Jun 10 19:53:10 2013] source mask rpix=3.4, npix_max = 59, mask sum = 64, frac = 1.068
[Mon Jun 10 19:53:10 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 14.66"
[Mon Jun 10 19:53:11 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src23.ximg exists
[Mon Jun 10 19:53:11 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Jun 10 19:53:11 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src23 appears to have run properly
[Mon Jun 10 19:53:13 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Jun 10 19:53:13 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Jun 10 19:53:13 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Mon Jun 10 19:54:16 2013] Warning, spatial fit 23 centroid is now closest to src. 108
[Mon Jun 10 19:54:16 2013] Spatial fit model total counts = 2574.380000, observed total counts = 2570.000000
[Mon Jun 10 19:54:16 2013] Offset between fit and detection position for source 93 = 3.174675 pixels
[Mon Jun 10 19:54:16 2013] Warning, changing simple spatial fit ID from 23 to 42
[Mon Jun 10 19:54:16 2013] 2527.963000 total counts/ 1841.020000 bgd. counts: snr = 16.010004
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 3.174675 pixels
  Position = (270.8, 307.3) = 15 3 45.14 -42 1 43.8
  Extent = 31.0 (28.3-61.9)" x 16.1 (13.4-19.9)", rotation angle = 22 (12-30) degrees
  Source counts = 686.9 +/- 50.3
  Background counts = 1841.0
  Rate = 0.05 +/- 0.004
[Mon Jun 10 19:54:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:16 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:54:16 2013] Source does appear to be extended
[Mon Jun 10 19:54:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.42
[Mon Jun 10 19:55:47 2013] XMMSAS src. selection expression = ellipse(23513.906000, 26687.374000, 1858.488053, 964.770028, 21.678000, X, Y)
[Mon Jun 10 19:55:47 2013] Not overwriting source region fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_src.reg
[Mon Jun 10 19:55:47 2013] Extracting stamp from image fullrun_mos2_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (164, 200) - (378, 414)
[Mon Jun 10 19:55:47 2013] XMMSAS bgd. selection expression = annulus(23513.906000, 26687.374000, 3097.480089, 6194.960178, X, Y) && !ellipse(26443.459320, 30270.129150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18285.924000, 33651.790000, 1741.160050, 1741.160050, 0.000000, X, Y) && !ellipse(17742.439789, 30484.918365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28308.867800, 22103.332000, 1265.488036, 1265.488036, 0.000000, X, Y) && !ellipse(22813.954000, 24164.320000, 587.716017, 587.716017, 0.000000, X, Y) && !ellipse(18055.879482, 34415.537393, 4038.352116, 2513.249216, 99.541831, X, Y) && !ellipse(23239.879600, 20660.110800, 1407.656041, 1407.656041, 0.000000, X, Y) && !ellipse(17726.808400, 30134.272000, 1652.816048, 1652.816048, 0.000000, X, Y) && !ellipse(17940.988190, 33032.963257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23911.090600, 27168.524960, 523.280815, 523.280815, 0.000000, X, Y) && !ellipse(23260.121674, 23417.031250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20240.875458, 27692.825836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27784.502400, 23239.086000, 1233.088035, 1233.088035, 0.000000, X, Y) && !ellipse(29438.374000, 32919.296000, 909.920026, 909.920026, 0.000000, X, Y) && !ellipse(23297.342529, 24319.072144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17881.551376, 32481.221619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21296.622635, 24233.004059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23017.341400, 26940.869400, 1238.992036, 1238.992036, 0.000000, X, Y) && !ellipse(17732.511200, 29235.503800, 1044.688030, 1044.688030, 0.000000, X, Y) && !ellipse(18110.065200, 27112.452000, 1529.368044, 1529.368044, 0.000000, X, Y) && !ellipse(23431.076355, 20308.617203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23808.165000, 24590.578800, 1201.256035, 1201.256035, 0.000000, X, Y) && !ellipse(17907.607834, 28417.322266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19794.689819, 25272.007294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21153.039978, 23542.569000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28975.226227, 31606.862061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23723.142853, 21628.173401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22585.284400, 30321.383400, 1039.000030, 1039.000030, 0.000000, X, Y) && !ellipse(25294.334600, 19415.851600, 1478.024043, 1478.024043, 0.000000, X, Y) && !ellipse(18985.362000, 28540.652000, 1363.152039, 556.036016, 13.619000, X, Y) && !ellipse(22560.806000, 22127.288200, 933.992027, 933.992027, 0.000000, X, Y) && !ellipse(28135.934296, 23091.519348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17247.475952, 33522.723236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27600.334200, 23336.234400, 2427.440070, 1119.208032, 12.558000, X, Y) && !ellipse(24430.601959, 19758.751343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17285.092407, 32841.155975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22221.628204, 27259.225037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24040.697632, 20650.768173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26933.112000, 32511.070000, 1497.320043, 1497.320043, 0.000000, X, Y) && !ellipse(22387.278600, 31558.974400, 918.462915, 918.462915, 0.000000, X, Y) && !ellipse(25402.884308, 21999.747406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23886.684692, 23173.987213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17752.962000, 27824.606000, 1565.848045, 1565.848045, 0.000000, X, Y) && !ellipse(25923.692200, 29794.894836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24223.244171, 21301.525146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26900.602264, 30998.371826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25751.633026, 25434.237549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26075.074005, 22739.743896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28408.563324, 30697.753479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28619.318000, 32133.784000, 1519.472044, 1519.472044, 0.000000, X, Y) && !ellipse(28000.336639, 33469.686371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25871.313782, 21486.625824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23459.652435, 22028.188080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24320.434174, 31438.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17634.973495, 31182.845917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29075.002228, 31226.064484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22267.655792, 20958.509964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25834.881470, 30469.614777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.803070, 29656.512054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17862.055496, 31605.651367, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:47 2013] Writing fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93.gif
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_src.evt and ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:55 2013] Mean detx,y = (3287.58, -222.81) 
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_src.img and ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:55 2013] Setting source spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Mon Jun 10 19:55:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93_bgd.lc exist, delete to re-create
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93.rmf exists, delete to re-create
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src93.arf exists, delete to re-create