[Mon Jun 10 19:49:11 2013] Detection parameters:
  Position = (335.5, 374.5) = 15 3 19.91 -41 56 50.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.0 +/- 19.8
  Background counts = 105.7
  Rate = 0.01 +/- 0.002

[Mon Jun 10 19:49:15 2013] Off-axis axis estimate = 6.14'
[Mon Jun 10 19:50:57 2013] Using EEF radius (= 9.50 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:57 2013] Initial guess for spatial extent in simple fitting = 9.50"
[Mon Jun 10 19:50:57 2013] source mask rpix=2.2, npix_max = 28, mask sum = 17, frac = 0.590
[Mon Jun 10 19:50:57 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 9.50"
[Mon Jun 10 19:50:59 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src39.ximg exists
[Mon Jun 10 19:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src39.csv
[Mon Jun 10 19:50:59 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Jun 10 19:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src39.csv
[Mon Jun 10 19:50:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:51:01 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Jun 10 19:51:01 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Jun 10 19:51:01 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Jun 10 19:52:07 2013] Warning, spatial fit 39 centroid is now closest to src. 64
[Mon Jun 10 19:52:07 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:52:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:52:07 2013] Assessing source extent using major
[Mon Jun 10 19:52:07 2013] Source does appear to be extended
[Mon Jun 10 19:52:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:52:07 2013] Source is confused with source 64
[Mon Jun 10 19:53:10 2013] Using EEF radius (= 9.50 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:10 2013] Initial guess for spatial extent in simple fitting = 9.50"
[Mon Jun 10 19:53:10 2013] source mask rpix=2.2, npix_max = 28, mask sum = 17, frac = 0.590
[Mon Jun 10 19:53:10 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 9.50"
[Mon Jun 10 19:53:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src36.ximg exists
[Mon Jun 10 19:53:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src36.csv
[Mon Jun 10 19:53:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src36_1.ximg exists
[Mon Jun 10 19:53:12 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src36.csv
[Mon Jun 10 19:53:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:14 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Mon Jun 10 19:53:14 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Mon Jun 10 19:53:14 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Mon Jun 10 19:54:16 2013] Spatial fit model total counts = 1367.640000, observed total counts = 1400.000000
[Mon Jun 10 19:54:16 2013] Offset between fit and detection position for source 60 = 5.588505 pixels
[Mon Jun 10 19:54:16 2013] 1316.656000 total counts/ 1191.800000 bgd. counts: snr = 3.616660
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 5.588505 pixels
  Position = (338.9, 378.9) = 15 3 18.57 -41 56 32.1
  Extent = 11.4 (8.2-19.0)", rotation angle = 0
  Source counts = 124.9 +/- 36.3
  Background counts = 1191.8
  Rate = 0.009 +/- 0.003
[Mon Jun 10 19:54:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:16 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:54:16 2013] Source does appear to be extended
[Mon Jun 10 19:54:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:48 2013] XMMSAS src. selection expression = ellipse(29438.374000, 32919.296000, 682.440020, 682.440020, 0.000000, X, Y)
[Mon Jun 10 19:55:48 2013] Not overwriting source region fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_src.reg
[Mon Jun 10 19:55:48 2013] Extracting stamp from image fullrun_mos2_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (300, 340) - (378, 418)
[Mon Jun 10 19:55:48 2013] XMMSAS bgd. selection expression = annulus(29438.374000, 32919.296000, 1137.400033, 2274.800065, X, Y) && !ellipse(26443.459320, 30270.129150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30625.224000, 36762.780000, 1844.136053, 1844.136053, 0.000000, X, Y) && !ellipse(28975.226227, 31606.862061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.876404, 34054.623840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26933.112000, 32511.070000, 1497.320043, 1497.320043, 0.000000, X, Y) && !ellipse(26900.602264, 30998.371826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28408.563324, 30697.753479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28619.318000, 32133.784000, 1519.472044, 1519.472044, 0.000000, X, Y) && !ellipse(28000.336639, 33469.686371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29075.002228, 31226.064484, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:48 2013] Writing fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60.gif
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_src.evt and ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:55 2013] Mean detx,y = (-4047.29, 4104.92) 
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_src.img and ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:55 2013] Setting source spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Jun 10 19:55:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60_bgd.lc exist, delete to re-create
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60.rmf exists, delete to re-create
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src60.arf exists, delete to re-create