[Mon Jun 10 19:49:10 2013] Detection parameters:
  Position = (355.5, 427.0) = 15 3 12.14 -41 53 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.1 +/- 16.5
  Background counts = 61.8
  Rate = 0.01 +/- 0.002

[Mon Jun 10 19:49:15 2013] Off-axis axis estimate = 10.19'
[Mon Jun 10 19:50:57 2013] Using EEF radius (= 11.53 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:57 2013] Initial guess for spatial extent in simple fitting = 11.53"
[Mon Jun 10 19:50:57 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.058
[Mon Jun 10 19:50:57 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 11.53"
[Mon Jun 10 19:50:59 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src54.ximg exists
[Mon Jun 10 19:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src54.csv
[Mon Jun 10 19:50:59 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src54_1.ximg exists
[Mon Jun 10 19:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src54.csv
[Mon Jun 10 19:50:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:51:01 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Mon Jun 10 19:51:01 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Mon Jun 10 19:51:01 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src54 appears to have run properly
[Mon Jun 10 19:52:07 2013] Spatial fit model total counts = 617.037000, observed total counts = 615.000000
[Mon Jun 10 19:52:07 2013] Offset between fit and detection position for source 38 = 4.817467 pixels
[Mon Jun 10 19:52:07 2013] 652.003000 total counts/ 210.457000 bgd. counts: snr = 30.436469
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 4.817467 pixels
  Position = (352.6, 423.1) = 15 3 13.27 -41 53 19.9
  Extent = 23.1 (23.0-46.1)", rotation angle = 0
  Source counts = 441.5 +/- 25.5
  Background counts = 210.5
  Rate = 0.03 +/- 0.002
[Mon Jun 10 19:52:07 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:52:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:52:07 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:52:07 2013] Source does appear to be extended
[Mon Jun 10 19:52:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:53:10 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:10 2013] Initial guess for spatial extent in simple fitting = 23.05"
[Mon Jun 10 19:53:10 2013] source mask rpix=5.3, npix_max = 134, mask sum = 132, frac = 0.981
[Mon Jun 10 19:53:10 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 23.05"
[Mon Jun 10 19:53:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src50.ximg exists
[Mon Jun 10 19:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src50.csv
[Mon Jun 10 19:53:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src50_1.ximg exists
[Mon Jun 10 19:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src50.csv
[Mon Jun 10 19:53:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:14 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Mon Jun 10 19:53:14 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Mon Jun 10 19:53:14 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Mon Jun 10 19:54:16 2013] Warning, spatial fit 50 centroid is now closest to src. 54
[Mon Jun 10 19:54:17 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:17 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:54:17 2013] Source does appear to be extended
[Mon Jun 10 19:54:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:49 2013] XMMSAS src. selection expression = ellipse(30625.224000, 36762.780000, 1383.102040, 1383.102040, 0.000000, X, Y)
[Mon Jun 10 19:55:49 2013] Not overwriting source region fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_src.reg
[Mon Jun 10 19:55:49 2013] Extracting stamp from image fullrun_mos2_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (273, 344) - (432, 503)
[Mon Jun 10 19:55:49 2013] XMMSAS bgd. selection expression = annulus(30625.224000, 36762.780000, 2305.170066, 4610.340133, X, Y) && !ellipse(25975.675300, 37885.017000, 452.960013, 452.960013, 0.000000, X, Y) && !ellipse(35255.485626, 35881.854828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29438.374000, 32919.296000, 909.920026, 909.920026, 0.000000, X, Y) && !ellipse(28975.226227, 31606.862061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.876404, 34054.623840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26933.112000, 32511.070000, 1497.320043, 1497.320043, 0.000000, X, Y) && !ellipse(35338.938507, 34341.332489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28619.318000, 32133.784000, 1519.472044, 1519.472044, 0.000000, X, Y) && !ellipse(28000.336639, 33469.686371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33623.757721, 37057.138062, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:49 2013] Writing fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38.gif
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_src.evt and ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:55 2013] Mean detx,y = (-6389.23, 7604.30) 
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_src.img and ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:55 2013] Setting source spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon Jun 10 19:55:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38_bgd.lc exist, delete to re-create
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38.rmf exists, delete to re-create
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src38.arf exists, delete to re-create