[Mon Jun 10 19:49:09 2013] Detection parameters:
  Position = (215.2, 445.1) = 15 4 6.77 -41 51 42.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 488.8 +/- 30.3
  Background counts = 56.4
  Rate = 0.03 +/- 0.002

[Mon Jun 10 19:49:15 2013] Off-axis axis estimate = 12.22'
[Mon Jun 10 19:50:57 2013] Using EEF radius (= 12.54 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:50:57 2013] Initial guess for spatial extent in simple fitting = 12.54"
[Mon Jun 10 19:50:57 2013] source mask rpix=2.9, npix_max = 45, mask sum = 39, frac = 0.852
[Mon Jun 10 19:50:57 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.54"
[Mon Jun 10 19:50:58 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 10 19:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src5.csv
[Mon Jun 10 19:50:58 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 10 19:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src5.csv
[Mon Jun 10 19:50:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:51:00 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 10 19:51:00 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 10 19:51:00 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jun 10 19:52:07 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.912280 pixels away
[Mon Jun 10 19:52:07 2013] Spatial fit model total counts = 2149.640000, observed total counts = 2039.000000
[Mon Jun 10 19:52:07 2013] Offset between fit and detection position for source 3 = 7.388345 pixels
[Mon Jun 10 19:52:07 2013] Warning, changing simple spatial fit ID from 5 to 15
[Mon Jun 10 19:52:07 2013] 2102.399000 total counts/ 1919.820000 bgd. counts: snr = 4.166972
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 7.388345 pixels
  Position = (213.5, 452.2) = 15 4 7.41 -41 51 13.0
  Extent = 24.5 (24.4-24.5)", rotation angle = 0
  Source counts = 182.6 +/- 45.9
  Background counts = 1919.8
  Rate = 0.01 +/- 0.003
[Mon Jun 10 19:52:07 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:52:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:52:07 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:52:07 2013] Source does appear to be extended
[Mon Jun 10 19:52:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:52:07 2013] Source is confused with source 5
[Mon Jun 10 19:52:07 2013] Source is confused with source 8
[Mon Jun 10 19:53:10 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:10 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:53:10 2013] Initial guess for spatial extent in simple fitting = 24.46"
[Mon Jun 10 19:53:10 2013] source mask rpix=5.6, npix_max = 149, mask sum = 156, frac = 1.040
[Mon Jun 10 19:53:10 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 24.46"
[Mon Jun 10 19:53:11 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun 10 19:53:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src5.csv
[Mon Jun 10 19:53:11 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun 10 19:53:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src5.csv
[Mon Jun 10 19:53:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:13 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun 10 19:53:13 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun 10 19:53:13 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jun 10 19:54:16 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 18.046579 pixels away
[Mon Jun 10 19:54:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:16 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:54:16 2013] Source does appear to be extended
[Mon Jun 10 19:54:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:46 2013] XMMSAS src. selection expression = ellipse(18529.488000, 39297.212000, 1467.444042, 1467.444042, 0.000000, X, Y)
[Mon Jun 10 19:55:46 2013] Not overwriting source region fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 10 19:55:46 2013] Extracting stamp from image fullrun_mos2_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (129, 368) - (298, 537)
[Mon Jun 10 19:55:46 2013] XMMSAS bgd. selection expression = annulus(18529.488000, 39297.212000, 2445.740070, 4891.480141, X, Y) && !ellipse(18011.490080, 36483.340200, 1180.096034, 1180.096034, 0.000000, X, Y) && !ellipse(18158.208800, 37226.426400, 1945.216056, 687.836020, 107.609500, X, Y) && !ellipse(18897.517004, 39018.150988, 2023.312058, 975.485341, 117.910674, X, Y) && !ellipse(17895.473330, 35887.363029, 1970.600057, 1231.001700, 299.236421, X, Y) && !ellipse(18351.126000, 37636.114000, 2633.056076, 931.408027, 111.723000, X, Y) && !ellipse(18053.289340, 34911.968000, 1804.096052, 1804.096052, 0.000000, X, Y) && !ellipse(19971.500000, 40883.824000, 4038.352116, 4038.352116, 0.000000, X, Y) && !ellipse(18285.924000, 33651.790000, 1741.160050, 1741.160050, 0.000000, X, Y) && !ellipse(20497.980000, 42660.760200, 788.782423, 788.782423, 0.000000, X, Y) && !ellipse(18055.879482, 34415.537393, 4038.352116, 2513.249216, 99.541831, X, Y) && !ellipse(20311.912000, 42299.100000, 2161.560062, 512.400815, 117.607000, X, Y) && !ellipse(19051.094437, 33979.834320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20553.401611, 40317.718475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19663.712000, 38430.118000, 2365.976068, 2365.976068, 0.000000, X, Y) && !ellipse(19171.490723, 41698.641693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20839.146484, 43246.287476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19776.354187, 42751.716583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20142.630000, 38304.634000, 1910.936055, 1910.936055, 0.000000, X, Y) && !ellipse(20494.766617, 37027.274292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20965.512000, 36528.626000, 1851.768053, 1851.768053, 0.000000, X, Y) && !ellipse(21827.058990, 41928.429169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21389.248642, 42736.949310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21463.922668, 40996.800629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20103.892000, 37413.076000, 1852.808053, 1852.808053, 0.000000, X, Y) && !ellipse(20784.703781, 37444.095306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21458.949799, 38918.881775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21211.562134, 40224.354370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21963.488998, 37810.584930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20441.376633, 36259.349548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21289.327942, 39820.250946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19852.391571, 35618.683014, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:46 2013] Writing fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3.gif
[Mon Jun 10 19:55:54 2013] ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:54 2013] Mean detx,y = (4207.25, 13031.45) 
[Mon Jun 10 19:55:54 2013] ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_src.img and ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:54 2013] ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:54 2013] Setting source spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 10 19:55:54 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 10 19:55:54 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src3.arf exists, delete to re-create