[Mon Jun 10 19:49:15 2013] Detection parameters:
  Position = (240.1, 497.6) = 15 3 57.06 -41 47 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.9 +/- 22.6
  Background counts = 118.7
  Rate = 0.01 +/- 0.001

[Mon Jun 10 19:49:15 2013] Off-axis axis estimate = 15.05'
[Mon Jun 10 19:50:57 2013] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:57 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:50:57 2013] Initial guess for spatial extent in simple fitting = 13.95"
[Mon Jun 10 19:50:57 2013] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.964
[Mon Jun 10 19:50:57 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 13.95"
[Mon Jun 10 19:50:59 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src65.ximg exists
[Mon Jun 10 19:50:59 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src65_1.ximg exists
[Mon Jun 10 19:50:59 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src65 appears to have run properly
[Mon Jun 10 19:51:01 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Mon Jun 10 19:51:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src65.csv
[Mon Jun 10 19:51:01 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Mon Jun 10 19:51:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src65.csv
[Mon Jun 10 19:51:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:52:07 2013] Source 165 is offset by -1.781121 and -4.456351 pixels which is larger than
2 X fitted extent = 1.575232 x 1.575232, not incorporating fit results
[Mon Jun 10 19:52:07 2013] Warning: source 65 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 165 at 12.095992 pixels away
[Mon Jun 10 19:52:07 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:52:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:52:07 2013] Assessing source extent using major
[Mon Jun 10 19:52:07 2013] Source does appear to be extended
[Mon Jun 10 19:52:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:53:10 2013] Using EEF radius (= 13.95 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:10 2013] Initial guess for spatial extent in simple fitting = 13.95"
[Mon Jun 10 19:53:10 2013] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.964
[Mon Jun 10 19:53:10 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 13.95"
[Mon Jun 10 19:53:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src60.ximg exists
[Mon Jun 10 19:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src60.csv
[Mon Jun 10 19:53:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src60_1.ximg exists
[Mon Jun 10 19:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src60.csv
[Mon Jun 10 19:53:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:14 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Mon Jun 10 19:53:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src60.csv
[Mon Jun 10 19:53:14 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Mon Jun 10 19:53:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src60.csv
[Mon Jun 10 19:53:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:54:16 2013] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 165 at 12.267400 pixels away
[Mon Jun 10 19:54:17 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:17 2013] Assessing source extent using major
[Mon Jun 10 19:54:17 2013] Source does appear to be extended
[Mon Jun 10 19:54:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:54:17 2013] Source is confused with source 7
[Mon Jun 10 19:54:17 2013] Source is confused with source 6
[Mon Jun 10 19:55:49 2013] XMMSAS src. selection expression = ellipse(20839.146484, 43246.287476, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 19:55:49 2013] Not overwriting source region fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_src.reg
[Mon Jun 10 19:55:49 2013] Extracting stamp from image fullrun_mos2_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (203, 460) - (278, 535)
[Mon Jun 10 19:55:49 2013] XMMSAS bgd. selection expression = annulus(20839.146484, 43246.287476, 1087.500000, 2175.000000, X, Y) && !ellipse(18529.488000, 39297.212000, 1956.592056, 1956.592056, 0.000000, X, Y) && !ellipse(19971.500000, 40883.824000, 4038.352116, 4038.352116, 0.000000, X, Y) && !ellipse(20497.980000, 42660.760200, 788.782423, 788.782423, 0.000000, X, Y) && !ellipse(20311.912000, 42299.100000, 2161.560062, 512.400815, 117.607000, X, Y) && !ellipse(20553.401611, 40317.718475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19171.490723, 41698.641693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19776.354187, 42751.716583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21827.058990, 41928.429169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21389.248642, 42736.949310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21463.922668, 40996.800629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21211.562134, 40224.354370, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:49 2013] Writing fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165.gif
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_src.evt and ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:55 2013] Mean detx,y = (1337.50, 16269.71) 
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_src.img and ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:55 2013] Setting source spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_src_b10.pi.gz
[Mon Jun 10 19:55:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_bgd.pi.gz
[Mon Jun 10 19:55:55 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165_bgd.lc exist, delete to re-create
[Mon Jun 10 19:56:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 19:56:12 2013] rmf not generated due to insufficient counts
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src165.arf exists, delete to re-create