[Mon Jun 10 19:49:14 2013] Detection parameters:
  Position = (281.4, 227.7) = 15 3 41.03 -42 7 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.3 +/- 13.5
  Background counts = 63.5
  Rate = 0.008 +/- 0.002

[Mon Jun 10 19:49:15 2013] Off-axis axis estimate = 5.28'
[Mon Jun 10 19:50:57 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:57 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Mon Jun 10 19:50:57 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Mon Jun 10 19:50:57 2013] Giving source the simple spatial ID 98 for pass 0, mean size = 9.07"
[Mon Jun 10 19:51:00 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src98.ximg exists
[Mon Jun 10 19:51:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src98.csv
[Mon Jun 10 19:51:00 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src98_1.ximg exists
[Mon Jun 10 19:51:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src98.csv
[Mon Jun 10 19:51:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:51:02 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Mon Jun 10 19:51:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src98.csv
[Mon Jun 10 19:51:02 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Mon Jun 10 19:51:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src98.csv
[Mon Jun 10 19:51:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:52:07 2013] Source 144 is offset by -2.136621 and -2.824835 pixels which is larger than
2 X fitted extent = 1.061798 x 1.061798, not incorporating fit results
[Mon Jun 10 19:52:07 2013] Warning: source 98 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 144 at 11.829148 pixels away
[Mon Jun 10 19:52:07 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:52:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:52:07 2013] Assessing source extent using major
[Mon Jun 10 19:52:07 2013] Source does appear to be extended
[Mon Jun 10 19:52:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:53:10 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:10 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Mon Jun 10 19:53:10 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.936
[Mon Jun 10 19:53:10 2013] Giving source the simple spatial ID 91 for pass 1, mean size = 9.07"
[Mon Jun 10 19:53:13 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src91.ximg exists
[Mon Jun 10 19:53:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src91.csv
[Mon Jun 10 19:53:13 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src91_1.ximg exists
[Mon Jun 10 19:53:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src91.csv
[Mon Jun 10 19:53:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:15 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Mon Jun 10 19:53:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src91.csv
[Mon Jun 10 19:53:15 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Mon Jun 10 19:53:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src91.csv
[Mon Jun 10 19:53:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:54:16 2013] Source 144 is offset by 8.665195 and 2.827395 pixels which is larger than
2 X fitted extent = 8.337885 x 8.337885, not incorporating fit results
[Mon Jun 10 19:54:17 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:17 2013] Assessing source extent using major
[Mon Jun 10 19:54:17 2013] Source does appear to be extended
[Mon Jun 10 19:54:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:54:17 2013] Source is confused with source 148
[Mon Jun 10 19:55:50 2013] XMMSAS src. selection expression = ellipse(24430.601959, 19758.751343, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 19:55:50 2013] Not overwriting source region fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_src.reg
[Mon Jun 10 19:55:50 2013] Extracting stamp from image fullrun_mos2_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (244, 190) - (319, 265)
[Mon Jun 10 19:55:50 2013] XMMSAS bgd. selection expression = annulus(24430.601959, 19758.751343, 1087.500000, 2175.000000, X, Y) && !ellipse(23239.879600, 20660.110800, 1407.656041, 1407.656041, 0.000000, X, Y) && !ellipse(23431.076355, 20308.617203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23723.142853, 21628.173401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25294.334600, 19415.851600, 1478.024043, 1478.024043, 0.000000, X, Y) && !ellipse(22560.806000, 22127.288200, 933.992027, 933.992027, 0.000000, X, Y) && !ellipse(27600.334200, 23336.234400, 2427.440070, 1119.208032, 12.558000, X, Y) && !ellipse(26430.566000, 18454.767600, 1455.976042, 1455.976042, 0.000000, X, Y) && !ellipse(24040.697632, 20650.768173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25402.884308, 21999.747406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24223.244171, 21301.525146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25522.737640, 19589.999008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26075.074005, 22739.743896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25871.313782, 21486.625824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23459.652435, 22028.188080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22267.655792, 20958.509964, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:50 2013] Writing fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144.gif
[Mon Jun 10 19:55:56 2013] ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_src.evt and ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:56 2013] Mean detx,y = (4287.49, -7229.39) 
[Mon Jun 10 19:55:56 2013] ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_src.img and ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:56 2013] ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:56 2013] Setting source spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_src_b10.pi.gz
[Mon Jun 10 19:55:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_bgd.pi.gz
[Mon Jun 10 19:55:56 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144_bgd.lc exist, delete to re-create
[Mon Jun 10 19:56:12 2013] Not generating rmf since there are only 66 counts
[Mon Jun 10 19:56:12 2013] rmf not generated due to insufficient counts
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src144.arf exists, delete to re-create