[Mon Jun 10 19:49:13 2013] Detection parameters:
  Position = (324.0, 266.0) = 15 3 24.39 -42 4 46.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.5 +/- 21.6
  Background counts = 132.9
  Rate = 0.009 +/- 0.002

[Mon Jun 10 19:49:15 2013] Off-axis axis estimate = 2.99'
[Mon Jun 10 19:50:57 2013] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:57 2013] Initial guess for spatial extent in simple fitting = 7.93"
[Mon Jun 10 19:50:57 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.742
[Mon Jun 10 19:50:57 2013] Giving source the simple spatial ID 77 for pass 0, mean size = 7.93"
[Mon Jun 10 19:50:59 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src77.ximg exists
[Mon Jun 10 19:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src77.csv
[Mon Jun 10 19:50:59 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src77_1.ximg exists
[Mon Jun 10 19:50:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src77.csv
[Mon Jun 10 19:50:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:51:01 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Mon Jun 10 19:51:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src77.csv
[Mon Jun 10 19:51:01 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Mon Jun 10 19:51:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src77.csv
[Mon Jun 10 19:51:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:52:07 2013] Source 123 is offset by -7.595284 and 1.422935 pixels which is larger than
2 X fitted extent = 0.944290 x 0.944290, not incorporating fit results
[Mon Jun 10 19:52:07 2013] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 123 at 14.282444 pixels away
[Mon Jun 10 19:52:07 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:52:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:52:07 2013] Assessing source extent using major
[Mon Jun 10 19:52:07 2013] Source does appear to be extended
[Mon Jun 10 19:52:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:52:07 2013] Source is confused with source 116
[Mon Jun 10 19:53:10 2013] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:10 2013] Initial guess for spatial extent in simple fitting = 7.93"
[Mon Jun 10 19:53:10 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.742
[Mon Jun 10 19:53:10 2013] Giving source the simple spatial ID 71 for pass 1, mean size = 7.93"
[Mon Jun 10 19:53:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src71.ximg exists
[Mon Jun 10 19:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src71.csv
[Mon Jun 10 19:53:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src71_1.ximg exists
[Mon Jun 10 19:53:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src71.csv
[Mon Jun 10 19:53:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:14 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Mon Jun 10 19:53:14 2013] fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Mon Jun 10 19:53:14 2013] Fit fullrun_mos2_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Mon Jun 10 19:54:16 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 123 at 13.467676 pixels away
[Mon Jun 10 19:54:16 2013] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 123 at 16.745670 pixels away
[Mon Jun 10 19:54:16 2013] Source 123 is offset by -7.328709 and 6.264958 pixels which is larger than
2 X fitted extent = 0.910966 x 0.910966, not incorporating fit results
[Mon Jun 10 19:54:17 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:17 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:17 2013] Assessing source extent using major
[Mon Jun 10 19:54:17 2013] Source does appear to be extended
[Mon Jun 10 19:54:17 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:49 2013] XMMSAS src. selection expression = ellipse(28135.934296, 23091.519348, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 19:55:49 2013] Not overwriting source region fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_src.reg
[Mon Jun 10 19:55:49 2013] Extracting stamp from image fullrun_mos2_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (286, 228) - (361, 303)
[Mon Jun 10 19:55:49 2013] XMMSAS bgd. selection expression = annulus(28135.934296, 23091.519348, 1087.500000, 2175.000000, X, Y) && !ellipse(28308.867800, 22103.332000, 1265.488036, 1265.488036, 0.000000, X, Y) && !ellipse(23513.906000, 26687.374000, 2477.984071, 1286.360037, 21.678000, X, Y) && !ellipse(27784.502400, 23239.086000, 1233.088035, 1233.088035, 0.000000, X, Y) && !ellipse(30780.189484, 22419.815521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27600.334200, 23336.234400, 2427.440070, 1119.208032, 12.558000, X, Y) && !ellipse(25402.884308, 21999.747406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25751.633026, 25434.237549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26075.074005, 22739.743896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25871.313782, 21486.625824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30855.417084, 22929.472290, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:49 2013] Writing fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123.gif
[Mon Jun 10 19:55:56 2013] ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_src.evt and ../../xmm0111090601/products/events/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:56 2013] Mean detx,y = (-112.40, -4956.67) 
[Mon Jun 10 19:55:56 2013] ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_src.img and ../../xmm0111090601/products/images/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:56 2013] ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:56 2013] Setting source spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_src_b10.pi.gz
[Mon Jun 10 19:55:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_bgd.pi.gz
[Mon Jun 10 19:55:56 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123_bgd.lc exist, delete to re-create
[Mon Jun 10 19:56:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 19:56:12 2013] rmf not generated due to insufficient counts
[Mon Jun 10 19:56:12 2013] fullrun_mos2_xmm0111090601_pi300-10000_pass1_cl_src123.arf exists, delete to re-create