[Mon Jun 10 19:49:06 2013] Detection parameters:
  Position = (207.2, 347.0) = 15 4 9.97 -41 58 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.0 +/- 21.5
  Background counts = 82.0
  Rate = 0.02 +/- 0.002

[Mon Jun 10 19:49:08 2013] Off-axis axis estimate = 7.50'
[Mon Jun 10 19:50:52 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:52 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Mon Jun 10 19:50:52 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Mon Jun 10 19:50:52 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.18"
[Mon Jun 10 19:50:53 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src19.ximg exists
[Mon Jun 10 19:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src19.csv
[Mon Jun 10 19:50:53 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Jun 10 19:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src19.csv
[Mon Jun 10 19:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:55 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Jun 10 19:50:55 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Jun 10 19:50:55 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Jun 10 19:51:47 2013] Spatial fit model total counts = 1338.800000, observed total counts = 1338.000000
[Mon Jun 10 19:51:47 2013] Offset between fit and detection position for source 81 = 1.907516 pixels
[Mon Jun 10 19:51:47 2013] 1191.177000 total counts/ 806.512000 bgd. counts: snr = 13.544945
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 1.907516 pixels
  Position = (209.1, 346.9) = 15 4 9.22 -41 58 51.1
  Extent = 20.4 (20.3-40.7)", rotation angle = 0
  Source counts = 384.7 +/- 34.5
  Background counts = 806.5
  Rate = 0.03 +/- 0.003
[Mon Jun 10 19:51:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:47 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:51:47 2013] Source does appear to be extended
[Mon Jun 10 19:51:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:51:47 2013] Source is confused with source 73
[Mon Jun 10 19:53:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:05 2013] Initial guess for spatial extent in simple fitting = 20.35"
[Mon Jun 10 19:53:05 2013] source mask rpix=4.7, npix_max = 107, mask sum = 100, frac = 0.932
[Mon Jun 10 19:53:05 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 20.35"
[Mon Jun 10 19:53:06 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src19.ximg exists
[Mon Jun 10 19:53:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src19.csv
[Mon Jun 10 19:53:06 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Jun 10 19:53:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src19.csv
[Mon Jun 10 19:53:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:08 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Jun 10 19:53:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src19.csv
[Mon Jun 10 19:53:08 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Jun 10 19:53:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src19.csv
[Mon Jun 10 19:53:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:54:01 2013] Warning, spatial fit 19 centroid is now closest to src. 90
[Mon Jun 10 19:54:02 2013] Source 81 is offset by -2.447715 and -3.069306 pixels which is larger than
2 X fitted extent = 1.803007 x 1.803007, not incorporating fit results
[Mon Jun 10 19:54:02 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:02 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:54:02 2013] Source does appear to be extended
[Mon Jun 10 19:54:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:22 2013] XMMSAS src. selection expression = ellipse(18140.588800, 30134.616400, 1221.144035, 1221.144035, 0.000000, X, Y)
[Mon Jun 10 19:55:22 2013] Not overwriting source region fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_src.reg
[Mon Jun 10 19:55:22 2013] Extracting stamp from image fullrun_mos1_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (139, 277) - (279, 417)
[Mon Jun 10 19:55:23 2013] XMMSAS bgd. selection expression = annulus(18140.588800, 30134.616400, 2035.240059, 4070.480117, X, Y) && !ellipse(18000.299600, 34690.327200, 757.938422, 491.103214, 352.483820, X, Y) && !ellipse(17724.718796, 31270.241516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18125.904343, 33972.251556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20202.721359, 27822.064697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20140.430389, 27418.160400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19247.663513, 33784.283447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17703.816000, 29887.232000, 1615.680046, 1615.680046, 0.000000, X, Y) && !ellipse(17342.133057, 31626.387146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17810.446400, 30762.114000, 1680.960048, 1680.960048, 0.000000, X, Y) && !ellipse(17804.601990, 32395.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18235.437576, 33374.862000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17200.318649, 32670.944702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22568.694000, 25183.384000, 1225.488035, 1225.488035, 0.000000, X, Y) && !ellipse(17860.005814, 28399.626495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18078.581100, 27191.707642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23083.914600, 26783.068800, 1237.696036, 1237.696036, 0.000000, X, Y) && !ellipse(18842.326828, 32668.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18159.994919, 31448.691345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18209.754150, 30920.876831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18866.551315, 35023.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17178.400055, 33097.939789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17976.521600, 28834.058000, 1548.320045, 1548.320045, 0.000000, X, Y) && !ellipse(18265.002655, 32689.848511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19894.726400, 25264.847000, 1441.896041, 1441.896041, 0.000000, X, Y) && !ellipse(17212.951279, 33528.115601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17334.781281, 34136.024384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19507.188644, 31998.654114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17775.625000, 29276.986237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22044.702362, 27815.262512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18279.524000, 26761.520000, 1544.264044, 1544.264044, 0.000000, X, Y) && !ellipse(22560.221436, 27344.071808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15049.677216, 27380.851929, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:23 2013] Writing fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81.gif
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_src.evt and ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:28 2013] Mean detx,y = (4876.41, -7751.77) 
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_src.img and ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:28 2013] Setting source spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Mon Jun 10 19:55:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81_bgd.lc exist, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81.rmf exists, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src81.arf exists, delete to re-create