[Mon Jun 10 19:49:03 2013] Detection parameters:
  Position = (216.7, 447.9) = 15 4 6.18 -41 51 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 582.8 +/- 34.2
  Background counts = 79.8
  Rate = 0.04 +/- 0.002

[Mon Jun 10 19:49:08 2013] Off-axis axis estimate = 12.35'
[Mon Jun 10 19:50:52 2013] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:50:52 2013] Initial guess for spatial extent in simple fitting = 12.60"
[Mon Jun 10 19:50:52 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.910
[Mon Jun 10 19:50:52 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 12.60"
[Mon Jun 10 19:50:52 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src5.ximg exists
[Mon Jun 10 19:50:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src5.csv
[Mon Jun 10 19:50:52 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Jun 10 19:50:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src5.csv
[Mon Jun 10 19:50:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:54 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Jun 10 19:50:54 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Jun 10 19:50:54 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Jun 10 19:51:47 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.866126 pixels away
[Mon Jun 10 19:51:47 2013] Warning, spatial fit 5 centroid is now closest to src. 2
[Mon Jun 10 19:51:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:47 2013] Assessing source extent using major
[Mon Jun 10 19:51:47 2013] Source does appear to be extended
[Mon Jun 10 19:51:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:51:47 2013] Source is confused with source 2
[Mon Jun 10 19:51:47 2013] Source is confused with source 6
[Mon Jun 10 19:53:05 2013] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:05 2013] Initial guess for spatial extent in simple fitting = 12.60"
[Mon Jun 10 19:53:05 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.910
[Mon Jun 10 19:53:05 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.60"
[Mon Jun 10 19:53:05 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src5.ximg exists
[Mon Jun 10 19:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src5.csv
[Mon Jun 10 19:53:05 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Jun 10 19:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src5.csv
[Mon Jun 10 19:53:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:08 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Jun 10 19:53:08 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Jun 10 19:53:08 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Jun 10 19:54:01 2013] Spatial fit model total counts = 7589.700000, observed total counts = 7556.000000
[Mon Jun 10 19:54:01 2013] Offset between fit and detection position for source 3 = 3.479315 pixels
[Mon Jun 10 19:54:01 2013] Warning, changing simple spatial fit ID from 5 to 3
[Mon Jun 10 19:54:01 2013] 7143.420000 total counts/ 5931.040000 bgd. counts: snr = 15.742487
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.479315 pixels
  Position = (219.7, 449.7) = 15 4 5.01 -41 51 24.2
  Extent = 18.9 (18.0-19.8)", rotation angle = 0
  Source counts = 1212.4 +/- 84.5
  Background counts = 5931.0
  Rate = 0.09 +/- 0.006
[Mon Jun 10 19:54:01 2013] Spatial fit model total counts = 2565.810000, observed total counts = 2559.000000
[Mon Jun 10 19:54:01 2013] Offset between fit and detection position for source 3 = 1.469163 pixels
[Mon Jun 10 19:54:01 2013] Warning, changing simple spatial fit ID from 3 to 5
[Mon Jun 10 19:54:01 2013] 2573.221000 total counts/ 1846.920000 bgd. counts: snr = 16.900229
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.469163 pixels
  Position = (218.7, 450.7) = 15 4 5.42 -41 51 19.9
  Extent = 17.9 (12.0-21.8)", rotation angle = 0
  Source counts = 726.3 +/- 50.7
  Background counts = 1846.9
  Rate = 0.06 +/- 0.004
[Mon Jun 10 19:54:02 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:02 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:54:02 2013] Source does appear to be extended
[Mon Jun 10 19:54:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:22 2013] XMMSAS src. selection expression = ellipse(18974.085400, 39161.301200, 1072.470031, 1072.470031, 0.000000, X, Y)
[Mon Jun 10 19:55:22 2013] Not overwriting source region fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 10 19:55:22 2013] Extracting stamp from image fullrun_mos1_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (157, 389) - (280, 512)
[Mon Jun 10 19:55:22 2013] XMMSAS bgd. selection expression = annulus(18974.085400, 39161.301200, 1787.450051, 3574.900103, X, Y) && !ellipse(18196.881400, 37129.370000, 1147.664033, 1147.664033, 0.000000, X, Y) && !ellipse(18549.834000, 38368.050000, 2005.280058, 2005.280058, 0.000000, X, Y) && !ellipse(18008.742420, 36371.102000, 1023.872029, 1023.872029, 0.000000, X, Y) && !ellipse(19235.783462, 39645.320393, 2084.168060, 1292.649668, 99.192980, X, Y) && !ellipse(18440.708000, 37305.978000, 1319.168038, 1319.168038, 0.000000, X, Y) && !ellipse(17978.011246, 35532.997253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18118.272200, 36662.718000, 1705.048049, 1073.696031, 90.000000, X, Y) && !ellipse(19318.541200, 40594.860000, 1947.688056, 1947.688056, 0.000000, X, Y) && !ellipse(19044.427658, 36941.394714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20210.815800, 42035.286000, 969.104028, 969.104028, 0.000000, X, Y) && !ellipse(20676.304000, 43098.496000, 2247.832065, 2247.832065, 0.000000, X, Y) && !ellipse(19730.722198, 40838.173248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19935.824539, 43011.994415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19596.787032, 38870.684030, 1829.405187, 880.143992, 253.860000, X, Y) && !ellipse(19159.746201, 41013.768921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19867.930130, 37637.694733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21270.436081, 43604.711121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18866.551315, 35023.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20463.356000, 35862.476000, 1197.104034, 1197.104034, 0.000000, X, Y) && !ellipse(19481.547699, 41979.411041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20384.101013, 38491.448608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21941.843872, 38202.116791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20742.096000, 37074.970000, 1625.960047, 808.024023, 19.076000, X, Y) && !ellipse(21210.982010, 39175.423981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19548.528778, 36759.631409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21669.765762, 41698.354950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21483.195526, 40490.406891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21603.060806, 38784.457642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20309.502655, 40842.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20892.695770, 38301.794556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20951.198013, 36520.673462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20431.514526, 36649.176880, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:22 2013] Writing fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3.gif
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:28 2013] Mean detx,y = (13150.82, -4214.14) 
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_src.img and ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:28 2013] Setting source spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 10 19:55:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3.rmf exists, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src3.arf exists, delete to re-create