[Mon Jun 10 19:49:03 2013] Detection parameters:
  Position = (213.2, 438.9) = 15 4 7.55 -41 52 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 655.6 +/- 35.3
  Background counts = 74.4
  Rate = 0.04 +/- 0.002

[Mon Jun 10 19:49:08 2013] Off-axis axis estimate = 11.91'
[Mon Jun 10 19:50:52 2013] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:50:52 2013] Initial guess for spatial extent in simple fitting = 12.38"
[Mon Jun 10 19:50:52 2013] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.937
[Mon Jun 10 19:50:52 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 12.38"
[Mon Jun 10 19:50:52 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 10 19:50:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 19:50:52 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 10 19:50:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 19:50:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:54 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 10 19:50:54 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 10 19:50:54 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jun 10 19:51:47 2013] Warning, spatial fit 3 centroid is now closest to src. 3
[Mon Jun 10 19:51:47 2013] Spatial fit model total counts = 2554.630000, observed total counts = 2559.000000
[Mon Jun 10 19:51:47 2013] Offset between fit and detection position for source 2 = 2.730822 pixels
[Mon Jun 10 19:51:47 2013] Warning, changing simple spatial fit ID from 3 to 5
[Mon Jun 10 19:51:47 2013] 2725.160000 total counts/ 1597.900000 bgd. counts: snr = 28.200012
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.730822 pixels
  Position = (213.8, 441.6) = 15 4 7.33 -41 51 59.5
  Extent = 25.1 (24.9-25.2)", rotation angle = 0
  Source counts = 1127.3 +/- 52.2
  Background counts = 1597.9
  Rate = 0.09 +/- 0.004
[Mon Jun 10 19:51:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:47 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:51:47 2013] Source does appear to be extended
[Mon Jun 10 19:51:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:51:47 2013] Source is confused with source 1
[Mon Jun 10 19:53:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:53:05 2013] Initial guess for spatial extent in simple fitting = 25.07"
[Mon Jun 10 19:53:05 2013] source mask rpix=5.8, npix_max = 156, mask sum = 156, frac = 0.994
[Mon Jun 10 19:53:05 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 25.07"
[Mon Jun 10 19:53:05 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 10 19:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 19:53:05 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 10 19:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 19:53:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:08 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 10 19:53:08 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 10 19:53:08 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jun 10 19:54:01 2013] Warning, spatial fit 3 centroid is now closest to src. 3
[Mon Jun 10 19:54:02 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:02 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:54:02 2013] Source does appear to be extended
[Mon Jun 10 19:54:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:21 2013] Counts = 1127.260000, rescaling region sizes by 2.000000
[Mon Jun 10 19:55:21 2013] XMMSAS src. selection expression = ellipse(18549.834000, 38368.050000, 3007.920087, 3007.920087, 0.000000, X, Y)
[Mon Jun 10 19:55:21 2013] Not overwriting source region fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_src.reg
[Mon Jun 10 19:55:21 2013] Extracting stamp from image fullrun_mos1_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (41, 269) - (387, 595)
[Mon Jun 10 19:55:22 2013] XMMSAS bgd. selection expression = annulus(18549.834000, 38368.050000, 10026.400289, 20052.800577, X, Y) && !ellipse(26000.109600, 37894.928800, 447.174413, 447.174413, 0.000000, X, Y) && !ellipse(18196.881400, 37129.370000, 1147.664033, 1147.664033, 0.000000, X, Y) && !ellipse(18008.742420, 36371.102000, 1023.872029, 1023.872029, 0.000000, X, Y) && !ellipse(18974.085400, 39161.301200, 1429.960041, 1429.960041, 0.000000, X, Y) && !ellipse(32207.225250, 29283.791077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19235.783462, 39645.320393, 2084.168060, 1292.649668, 99.192980, X, Y) && !ellipse(18440.708000, 37305.978000, 1319.168038, 1319.168038, 0.000000, X, Y) && !ellipse(17978.011246, 35532.997253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18118.272200, 36662.718000, 1705.048049, 1073.696031, 90.000000, X, Y) && !ellipse(18000.299600, 34690.327200, 757.938422, 491.103214, 352.483820, X, Y) && !ellipse(22773.460000, 24255.321000, 620.871218, 620.871218, 0.000000, X, Y) && !ellipse(27988.190196, 21416.498770, 2084.168060, 1790.094748, 345.365677, X, Y) && !ellipse(19318.541200, 40594.860000, 1947.688056, 1947.688056, 0.000000, X, Y) && !ellipse(17724.718796, 31270.241516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18125.904343, 33972.251556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20202.721359, 27822.064697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20140.430389, 27418.160400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31807.393768, 21361.494293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18140.588800, 30134.616400, 1628.192047, 1628.192047, 0.000000, X, Y) && !ellipse(19247.663513, 33784.283447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17703.816000, 29887.232000, 1615.680046, 1615.680046, 0.000000, X, Y) && !ellipse(17342.133057, 31626.387146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19044.427658, 36941.394714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33414.068817, 18579.780273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17810.446400, 30762.114000, 1680.960048, 1680.960048, 0.000000, X, Y) && !ellipse(20210.815800, 42035.286000, 969.104028, 969.104028, 0.000000, X, Y) && !ellipse(20676.304000, 43098.496000, 2247.832065, 2247.832065, 0.000000, X, Y) && !ellipse(23751.704800, 26517.590400, 1031.176030, 1031.176030, 0.000000, X, Y) && !ellipse(19730.722198, 40838.173248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17804.601990, 32395.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18235.437576, 33374.862000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37004.518036, 22578.626099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17200.318649, 32670.944702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22568.694000, 25183.384000, 1225.488035, 1225.488035, 0.000000, X, Y) && !ellipse(19935.824539, 43011.994415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19596.787032, 38870.684030, 1829.405187, 880.143992, 253.860000, X, Y) && !ellipse(19159.746201, 41013.768921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17860.005814, 28399.626495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18078.581100, 27191.707642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23348.969574, 21075.537018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29689.239600, 19053.085600, 1318.664038, 1318.664038, 0.000000, X, Y) && !ellipse(28942.837524, 31649.918671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21102.687347, 24374.979095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23001.844000, 20629.900000, 778.353622, 778.353622, 0.000000, X, Y) && !ellipse(19867.930130, 37637.694733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21270.436081, 43604.711121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35921.682922, 23541.865417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23251.289040, 23426.762400, 772.926422, 772.926422, 0.000000, X, Y) && !ellipse(23083.914600, 26783.068800, 1237.696036, 1237.696036, 0.000000, X, Y) && !ellipse(32818.088000, 19495.270000, 1727.912050, 1727.912050, 0.000000, X, Y) && !ellipse(23718.891600, 27008.593800, 1188.384034, 1188.384034, 0.000000, X, Y) && !ellipse(18842.326828, 32668.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18159.994919, 31448.691345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18209.754150, 30920.876831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18866.551315, 35023.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17178.400055, 33097.939789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17976.521600, 28834.058000, 1548.320045, 1548.320045, 0.000000, X, Y) && !ellipse(29220.606689, 33059.290527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20463.356000, 35862.476000, 1197.104034, 1197.104034, 0.000000, X, Y) && !ellipse(29751.174000, 17383.460000, 1683.744048, 1683.744048, 0.000000, X, Y) && !ellipse(27536.400000, 23561.880000, 1262.184036, 507.684815, 204.658000, X, Y) && !ellipse(26887.670400, 29242.126800, 610.859218, 610.859218, 0.000000, X, Y) && !ellipse(20538.362198, 24226.876251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36735.940000, 23843.400000, 1557.880045, 1557.880045, 0.000000, X, Y) && !ellipse(24622.318970, 19889.029648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35202.735504, 23258.810089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27233.717200, 31182.715000, 1126.624032, 1126.624032, 0.000000, X, Y) && !ellipse(18265.002655, 32689.848511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30303.794922, 22421.336853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19481.547699, 41979.411041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32437.156097, 20127.665009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.736000, 24664.489360, 858.752025, 858.752025, 0.000000, X, Y) && !ellipse(19894.726400, 25264.847000, 1441.896041, 1441.896041, 0.000000, X, Y) && !ellipse(37475.857422, 22881.904785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25527.752991, 19263.078613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17212.951279, 33528.115601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17334.781281, 34136.024384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23696.655600, 21691.842200, 835.208024, 835.208024, 0.000000, X, Y) && !ellipse(25673.451000, 25296.196400, 957.424028, 957.424028, 0.000000, X, Y) && !ellipse(19507.188644, 31998.654114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27302.204800, 35296.697200, 843.472024, 843.472024, 0.000000, X, Y) && !ellipse(28101.636627, 23176.928986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29074.547800, 31846.198000, 1167.064034, 1167.064034, 0.000000, X, Y) && !ellipse(34565.232000, 19320.551600, 1262.184036, 998.080029, 359.306000, X, Y) && !ellipse(34712.574615, 35346.497375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30758.308000, 16558.566000, 2928.104084, 2928.104084, 0.000000, X, Y) && !ellipse(23458.473602, 20280.525665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26522.791595, 30404.810822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17775.625000, 29276.986237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20384.101013, 38491.448608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22164.144000, 22450.348000, 1369.240039, 1369.240039, 0.000000, X, Y) && !ellipse(21941.843872, 38202.116791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35591.386658, 34878.606873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27365.330627, 33210.839600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20742.096000, 37074.970000, 1625.960047, 808.024023, 19.076000, X, Y) && !ellipse(33281.038574, 24400.905457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35333.936432, 24221.369720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25678.086060, 21078.827927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22044.702362, 27815.262512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30589.896000, 22365.531800, 1402.536040, 1402.536040, 0.000000, X, Y) && !ellipse(30176.488922, 26296.389282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21210.982010, 39175.423981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18279.524000, 26761.520000, 1544.264044, 1544.264044, 0.000000, X, Y) && !ellipse(19548.528778, 36759.631409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31663.377014, 25701.561829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19427.555023, 24674.126556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27374.455963, 33593.846161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35078.634125, 34291.940979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28961.523621, 30934.451996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.313507, 33610.286102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21669.765762, 41698.354950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22560.221436, 27344.071808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28750.836426, 32950.569733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31608.441803, 29213.554932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35873.289703, 18072.228943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21483.195526, 40490.406891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21603.060806, 38784.457642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20309.502655, 40842.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25894.909027, 30489.824860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10654.162048, 26226.126587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20892.695770, 38301.794556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28776.332672, 27386.971771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38290.858490, 17629.901062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15049.677216, 27380.851929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20951.198013, 36520.673462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20431.514526, 36649.176880, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:22 2013] Writing fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2.gif
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:28 2013] Mean detx,y = (12198.49, -4423.28) 
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_src.img and ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:28 2013] Setting source spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun 10 19:55:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src2.arf exists, delete to re-create