[Mon Jun 10 19:49:08 2013] Detection parameters:
  Position = (245.0, 501.8) = 15 3 55.13 -41 47 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 190.5 +/- 24.2
  Background counts = 122.7
  Rate = 0.01 +/- 0.002

[Mon Jun 10 19:49:08 2013] Off-axis axis estimate = 15.24'
[Mon Jun 10 19:50:52 2013] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:50:52 2013] Initial guess for spatial extent in simple fitting = 14.05"
[Mon Jun 10 19:50:52 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.006
[Mon Jun 10 19:50:52 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 14.05"
[Mon Jun 10 19:50:53 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jun 10 19:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src49.csv
[Mon Jun 10 19:50:53 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jun 10 19:50:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src49.csv
[Mon Jun 10 19:50:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:56 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jun 10 19:50:56 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jun 10 19:50:56 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Mon Jun 10 19:51:47 2013] Warning, spatial fit 49 centroid is now closest to src. 14
[Mon Jun 10 19:51:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:47 2013] Assessing source extent using major
[Mon Jun 10 19:51:47 2013] Source does appear to be extended
[Mon Jun 10 19:51:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:51:47 2013] Source is confused with source 14
[Mon Jun 10 19:53:05 2013] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:05 2013] Initial guess for spatial extent in simple fitting = 14.05"
[Mon Jun 10 19:53:05 2013] source mask rpix=3.2, npix_max = 55, mask sum = 56, frac = 1.006
[Mon Jun 10 19:53:05 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 14.05"
[Mon Jun 10 19:53:06 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src47.ximg exists
[Mon Jun 10 19:53:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src47.csv
[Mon Jun 10 19:53:06 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src47_1.ximg exists
[Mon Jun 10 19:53:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src47.csv
[Mon Jun 10 19:53:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:09 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Mon Jun 10 19:53:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src47.csv
[Mon Jun 10 19:53:09 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Mon Jun 10 19:53:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src47.csv
[Mon Jun 10 19:53:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:54:01 2013] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 153 at 25.792471 pixels away
[Mon Jun 10 19:54:01 2013] Warning, spatial fit 47 centroid is now closest to src. 14
[Mon Jun 10 19:54:02 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:02 2013] Assessing source extent using major
[Mon Jun 10 19:54:02 2013] Source does appear to be extended
[Mon Jun 10 19:54:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:24 2013] XMMSAS src. selection expression = ellipse(21270.436081, 43604.711121, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 19:55:24 2013] Not overwriting source region fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_src.reg
[Mon Jun 10 19:55:24 2013] Extracting stamp from image fullrun_mos1_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (208, 464) - (283, 539)
[Mon Jun 10 19:55:24 2013] XMMSAS bgd. selection expression = annulus(21270.436081, 43604.711121, 1087.500000, 2175.000000, X, Y) && !ellipse(19235.783462, 39645.320393, 2084.168060, 1292.649668, 99.192980, X, Y) && !ellipse(19318.541200, 40594.860000, 1947.688056, 1947.688056, 0.000000, X, Y) && !ellipse(20210.815800, 42035.286000, 969.104028, 969.104028, 0.000000, X, Y) && !ellipse(20676.304000, 43098.496000, 2247.832065, 2247.832065, 0.000000, X, Y) && !ellipse(19730.722198, 40838.173248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19935.824539, 43011.994415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19159.746201, 41013.768921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19481.547699, 41979.411041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21669.765762, 41698.354950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20309.502655, 40842.458466, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:24 2013] Writing fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153.gif
[Mon Jun 10 19:55:29 2013] ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_src.evt and ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:29 2013] Mean detx,y = (16730.67, -893.78) 
[Mon Jun 10 19:55:29 2013] ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_src.img and ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:29 2013] ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:29 2013] Setting source spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_src_b10.pi.gz
[Mon Jun 10 19:55:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_bgd.pi.gz
[Mon Jun 10 19:55:29 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153_bgd.lc exist, delete to re-create
[Mon Jun 10 19:55:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 19:55:46 2013] rmf not generated due to insufficient counts
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src153.arf exists, delete to re-create