[Mon Jun 10 19:49:07 2013] Detection parameters:
  Position = (431.3, 263.6) = 15 2 42.44 -42 4 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.1 +/- 17.9
  Background counts = 92.4
  Rate = 0.009 +/- 0.002

[Mon Jun 10 19:49:08 2013] Off-axis axis estimate = 9.96'
[Mon Jun 10 19:50:52 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:52 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Mon Jun 10 19:50:52 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.077
[Mon Jun 10 19:50:52 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 11.41"
[Mon Jun 10 19:50:54 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src81.ximg exists
[Mon Jun 10 19:50:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src81.csv
[Mon Jun 10 19:50:54 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src81_1.ximg exists
[Mon Jun 10 19:50:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src81.csv
[Mon Jun 10 19:50:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:57 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Mon Jun 10 19:50:57 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Mon Jun 10 19:50:57 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Mon Jun 10 19:51:47 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 123 at 13.862284 pixels away
[Mon Jun 10 19:51:47 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 123 at 21.500701 pixels away
[Mon Jun 10 19:51:47 2013] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 123 at 12.006724 pixels away
[Mon Jun 10 19:51:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:47 2013] Assessing source extent using major
[Mon Jun 10 19:51:47 2013] Source does appear to be extended
[Mon Jun 10 19:51:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:51:47 2013] Source is confused with source 127
[Mon Jun 10 19:53:05 2013] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:05 2013] Initial guess for spatial extent in simple fitting = 11.41"
[Mon Jun 10 19:53:05 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.077
[Mon Jun 10 19:53:05 2013] Giving source the simple spatial ID 76 for pass 1, mean size = 11.41"
[Mon Jun 10 19:53:07 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src76.ximg exists
[Mon Jun 10 19:53:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src76.csv
[Mon Jun 10 19:53:07 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src76_1.ximg exists
[Mon Jun 10 19:53:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src76.csv
[Mon Jun 10 19:53:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:10 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Mon Jun 10 19:53:10 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Mon Jun 10 19:53:10 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Mon Jun 10 19:54:01 2013] Source 123 is offset by -4.200007 and -7.778520 pixels which is larger than
2 X fitted extent = 1.545012 x 1.545012, not incorporating fit results
[Mon Jun 10 19:54:02 2013] Warning: source 66 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 123 at 14.465423 pixels away
[Mon Jun 10 19:54:02 2013] Warning: source 76 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 123 at 14.928427 pixels away
[Mon Jun 10 19:54:02 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:02 2013] Assessing source extent using major
[Mon Jun 10 19:54:02 2013] Source does appear to be extended
[Mon Jun 10 19:54:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:25 2013] XMMSAS src. selection expression = ellipse(37475.857422, 22881.904785, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 19:55:25 2013] Not overwriting source region fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_src.reg
[Mon Jun 10 19:55:25 2013] Extracting stamp from image fullrun_mos1_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (394, 226) - (469, 301)
[Mon Jun 10 19:55:25 2013] XMMSAS bgd. selection expression = annulus(37475.857422, 22881.904785, 1087.500000, 2175.000000, X, Y) && !ellipse(37004.518036, 22578.626099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35921.682922, 23541.865417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39997.962677, 21274.551376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36735.940000, 23843.400000, 1557.880045, 1557.880045, 0.000000, X, Y) && !ellipse(35202.735504, 23258.810089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35333.936432, 24221.369720, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:25 2013] Writing fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123.gif
[Mon Jun 10 19:55:30 2013] ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_src.evt and ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:30 2013] Mean detx,y = (-7582.56, 8850.19) 
[Mon Jun 10 19:55:30 2013] ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_src.img and ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:30 2013] ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:30 2013] Setting source spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_src_b10.pi.gz
[Mon Jun 10 19:55:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_bgd.pi.gz
[Mon Jun 10 19:55:30 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123_bgd.lc exist, delete to re-create
[Mon Jun 10 19:55:46 2013] Not generating rmf since there are only 75 counts
[Mon Jun 10 19:55:46 2013] rmf not generated due to insufficient counts
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src123.arf exists, delete to re-create