[Mon Jun 10 19:49:07 2013] Detection parameters:
  Position = (227.4, 291.1) = 15 4 2.10 -42 2 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.0 +/- 16.7
  Background counts = 68.7
  Rate = 0.009 +/- 0.002

[Mon Jun 10 19:49:08 2013] Off-axis axis estimate = 5.18'
[Mon Jun 10 19:50:52 2013] Using EEF radius (= 9.02 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:52 2013] Initial guess for spatial extent in simple fitting = 9.02"
[Mon Jun 10 19:50:52 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.944
[Mon Jun 10 19:50:52 2013] Giving source the simple spatial ID 80 for pass 0, mean size = 9.02"
[Mon Jun 10 19:50:54 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src80.ximg exists
[Mon Jun 10 19:50:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src80.csv
[Mon Jun 10 19:50:54 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src80_1.ximg exists
[Mon Jun 10 19:50:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src80.csv
[Mon Jun 10 19:50:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:50:57 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Mon Jun 10 19:50:57 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Mon Jun 10 19:50:57 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Mon Jun 10 19:51:47 2013] Spatial fit model total counts = 691.853000, observed total counts = 652.000000
[Mon Jun 10 19:51:47 2013] Offset between fit and detection position for source 105 = 1.831081 pixels
[Mon Jun 10 19:51:47 2013] 683.754000 total counts/ 449.814000 bgd. counts: snr = 11.030317
Spatial fit parameters:
  Offset between fit and detection position for source 105 = 1.831081 pixels
  Position = (229.2, 291.0) = 15 4 1.39 -42 2 54.7
  Extent = 18.0 (18.0-18.0)", rotation angle = 0
  Source counts = 233.9 +/- 26.1
  Background counts = 449.8
  Rate = 0.02 +/- 0.002
[Mon Jun 10 19:51:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:47 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:51:47 2013] Source does appear to be extended
[Mon Jun 10 19:51:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:51:47 2013] Source is confused with source 110
[Mon Jun 10 19:53:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:05 2013] Initial guess for spatial extent in simple fitting = 18.02"
[Mon Jun 10 19:53:05 2013] source mask rpix=4.1, npix_max = 86, mask sum = 83, frac = 0.962
[Mon Jun 10 19:53:05 2013] Giving source the simple spatial ID 75 for pass 1, mean size = 18.02"
[Mon Jun 10 19:53:07 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src75.ximg exists
[Mon Jun 10 19:53:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src75.csv
[Mon Jun 10 19:53:07 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src75_1.ximg exists
[Mon Jun 10 19:53:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src75.csv
[Mon Jun 10 19:53:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:10 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Mon Jun 10 19:53:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src75.csv
[Mon Jun 10 19:53:10 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Mon Jun 10 19:53:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src75.csv
[Mon Jun 10 19:53:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:54:02 2013] Source 105 is offset by 2.844878 and 1.345621 pixels which is larger than
2 X fitted extent = 1.201549 x 1.201549, not incorporating fit results
[Mon Jun 10 19:54:02 2013] Warning, spatial fit 75 centroid is now closest to src. 115
[Mon Jun 10 19:54:02 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:02 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:54:02 2013] Source does appear to be extended
[Mon Jun 10 19:54:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:25 2013] XMMSAS src. selection expression = ellipse(19894.726400, 25264.847000, 1081.422031, 1081.422031, 0.000000, X, Y)
[Mon Jun 10 19:55:25 2013] Not overwriting source region fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_src.reg
[Mon Jun 10 19:55:25 2013] Extracting stamp from image fullrun_mos1_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (167, 229) - (291, 353)
[Mon Jun 10 19:55:25 2013] XMMSAS bgd. selection expression = annulus(19894.726400, 25264.847000, 1802.370052, 3604.740104, X, Y) && !ellipse(22773.460000, 24255.321000, 620.871218, 620.871218, 0.000000, X, Y) && !ellipse(20202.721359, 27822.064697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20140.430389, 27418.160400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18140.588800, 30134.616400, 1628.192047, 1628.192047, 0.000000, X, Y) && !ellipse(17703.816000, 29887.232000, 1615.680046, 1615.680046, 0.000000, X, Y) && !ellipse(23751.704800, 26517.590400, 1031.176030, 1031.176030, 0.000000, X, Y) && !ellipse(22568.694000, 25183.384000, 1225.488035, 1225.488035, 0.000000, X, Y) && !ellipse(17860.005814, 28399.626495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18078.581100, 27191.707642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23348.969574, 21075.537018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21102.687347, 24374.979095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23251.289040, 23426.762400, 772.926422, 772.926422, 0.000000, X, Y) && !ellipse(23083.914600, 26783.068800, 1237.696036, 1237.696036, 0.000000, X, Y) && !ellipse(23718.891600, 27008.593800, 1188.384034, 1188.384034, 0.000000, X, Y) && !ellipse(17976.521600, 28834.058000, 1548.320045, 1548.320045, 0.000000, X, Y) && !ellipse(20538.362198, 24226.876251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23921.736000, 24664.489360, 858.752025, 858.752025, 0.000000, X, Y) && !ellipse(23696.655600, 21691.842200, 835.208024, 835.208024, 0.000000, X, Y) && !ellipse(17775.625000, 29276.986237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22164.144000, 22450.348000, 1369.240039, 1369.240039, 0.000000, X, Y) && !ellipse(22044.702362, 27815.262512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18279.524000, 26761.520000, 1544.264044, 1544.264044, 0.000000, X, Y) && !ellipse(19427.555023, 24674.126556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22560.221436, 27344.071808, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:25 2013] Writing fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105.gif
[Mon Jun 10 19:55:30 2013] ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_src.evt and ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:30 2013] Mean detx,y = (-415.65, -7395.82) 
[Mon Jun 10 19:55:30 2013] ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_src.img and ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:30 2013] ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:30 2013] Setting source spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Mon Jun 10 19:55:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Mon Jun 10 19:55:30 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105_bgd.lc exist, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105.rmf exists, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src105.arf exists, delete to re-create