[Mon Jun 10 19:49:03 2013] Detection parameters:
  Position = (206.9, 399.0) = 15 4 10.01 -41 55 3.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 388.6 +/- 28.1
  Background counts = 66.0
  Rate = 0.02 +/- 0.002

[Mon Jun 10 19:49:08 2013] Off-axis axis estimate = 9.86'
[Mon Jun 10 19:50:52 2013] Using EEF radius (= 11.36 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:52 2013] Initial guess for spatial extent in simple fitting = 11.36"
[Mon Jun 10 19:50:52 2013] source mask rpix=2.6, npix_max = 38, mask sum = 35, frac = 0.904
[Mon Jun 10 19:50:52 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 11.36"
[Mon Jun 10 19:50:52 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jun 10 19:50:52 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jun 10 19:50:52 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src11 appears to have run properly
[Mon Jun 10 19:50:55 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jun 10 19:50:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 10 19:50:55 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jun 10 19:50:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src11.csv
[Mon Jun 10 19:50:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:51:47 2013] Spatial fit model total counts = 1590.290000, observed total counts = 1763.000000
[Mon Jun 10 19:51:47 2013] Offset between fit and detection position for source 10 = 0.575173 pixels
[Mon Jun 10 19:51:47 2013] 1629.423000 total counts/ 1462.460000 bgd. counts: snr = 4.365945
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.575173 pixels
  Position = (207.5, 399.3) = 15 4 9.82 -41 55 3.3
  Extent = 9.5" x 6.1", rotation angle = 352
  Source counts = 167.0 +/- 40.4
  Background counts = 1462.5
  Rate = 0.01 +/- 0.003
[Mon Jun 10 19:51:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:47 2013] Assessing source extent using major
[Mon Jun 10 19:51:47 2013] Source does appear to be extended
[Mon Jun 10 19:51:47 2013] Computing asymmetry using major and minor axis, asym = 1.54
[Mon Jun 10 19:51:47 2013] Source is asymmetric
[Mon Jun 10 19:53:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:05 2013] Initial guess for spatial extent in simple fitting = 7.81"
[Mon Jun 10 19:53:05 2013] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.187
[Mon Jun 10 19:53:05 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 7.81"
[Mon Jun 10 19:53:05 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jun 10 19:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src11.csv
[Mon Jun 10 19:53:05 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jun 10 19:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src11.csv
[Mon Jun 10 19:53:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:08 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jun 10 19:53:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jun 10 19:53:08 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jun 10 19:53:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon Jun 10 19:53:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:54:01 2013] Spatial fit model total counts = 2045.270000, observed total counts = 1763.000000
[Mon Jun 10 19:54:01 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 19:54:02 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:02 2013] Assessing source extent using major
[Mon Jun 10 19:54:02 2013] Source does appear to be extended
[Mon Jun 10 19:54:02 2013] Computing asymmetry using major and minor axis, asym = 1.54
[Mon Jun 10 19:54:02 2013] Source is asymmetric
[Mon Jun 10 19:55:22 2013] XMMSAS src. selection expression = ellipse(18000.299600, 34690.327200, 568.453816, 368.327411, 352.483820, X, Y)
[Mon Jun 10 19:55:22 2013] Not overwriting source region fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_src.reg
[Mon Jun 10 19:55:22 2013] Extracting stamp from image fullrun_mos1_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (175, 367) - (240, 432)
[Mon Jun 10 19:55:22 2013] XMMSAS bgd. selection expression = annulus(18000.299600, 34690.327200, 947.423027, 1894.846055, X, Y) && !ellipse(18196.881400, 37129.370000, 1147.664033, 1147.664033, 0.000000, X, Y) && !ellipse(18549.834000, 38368.050000, 2005.280058, 2005.280058, 0.000000, X, Y) && !ellipse(18008.742420, 36371.102000, 1023.872029, 1023.872029, 0.000000, X, Y) && !ellipse(18440.708000, 37305.978000, 1319.168038, 1319.168038, 0.000000, X, Y) && !ellipse(17978.011246, 35532.997253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18118.272200, 36662.718000, 1705.048049, 1073.696031, 90.000000, X, Y) && !ellipse(18125.904343, 33972.251556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19247.663513, 33784.283447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19044.427658, 36941.394714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17804.601990, 32395.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18235.437576, 33374.862000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17200.318649, 32670.944702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18842.326828, 32668.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18866.551315, 35023.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17178.400055, 33097.939789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20463.356000, 35862.476000, 1197.104034, 1197.104034, 0.000000, X, Y) && !ellipse(18265.002655, 32689.848511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17212.951279, 33528.115601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17334.781281, 34136.024384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19507.188644, 31998.654114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20742.096000, 37074.970000, 1625.960047, 808.024023, 19.076000, X, Y) && !ellipse(19548.528778, 36759.631409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20431.514526, 36649.176880, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:22 2013] Writing fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10.gif
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:28 2013] Mean detx,y = (9223.58, -6480.54) 
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_src.img and ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:28 2013] Setting source spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jun 10 19:55:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10.rmf exists, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src10.arf exists, delete to re-create