[Mon Jun 10 19:49:03 2013] Detection parameters:
  Position = (210.9, 427.0) = 15 4 8.45 -41 53 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 669.9 +/- 35.7
  Background counts = 69.2
  Rate = 0.04 +/- 0.002

[Mon Jun 10 19:49:08 2013] Off-axis axis estimate = 11.27'
[Mon Jun 10 19:50:52 2013] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:50:52 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:50:52 2013] Initial guess for spatial extent in simple fitting = 12.07"
[Mon Jun 10 19:50:52 2013] source mask rpix=2.8, npix_max = 42, mask sum = 36, frac = 0.840
[Mon Jun 10 19:50:52 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 12.07"
[Mon Jun 10 19:50:52 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jun 10 19:50:52 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jun 10 19:50:52 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_src2 appears to have run properly
[Mon Jun 10 19:50:54 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jun 10 19:50:54 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jun 10 19:50:54 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Jun 10 19:51:47 2013] Warning, spatial fit 2 centroid is now closest to src. 44
[Mon Jun 10 19:51:47 2013] Spatial fit model total counts = 2368.970000, observed total counts = 2354.000000
[Mon Jun 10 19:51:47 2013] Offset between fit and detection position for source 1 = 1.207729 pixels
[Mon Jun 10 19:51:47 2013] Warning, changing simple spatial fit ID from 2 to 8
[Mon Jun 10 19:51:47 2013] 2237.132000 total counts/ 1649.680000 bgd. counts: snr = 14.463471
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.207729 pixels
  Position = (209.9, 427.7) = 15 4 8.84 -41 52 60.0
  Extent = 14.7 (12.6-17.8)", rotation angle = 0
  Source counts = 587.5 +/- 47.3
  Background counts = 1649.7
  Rate = 0.04 +/- 0.004
[Mon Jun 10 19:51:47 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:51:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:51:47 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:51:47 2013] Source does appear to be extended
[Mon Jun 10 19:51:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:51:47 2013] Source is confused with source 2
[Mon Jun 10 19:51:47 2013] Source is confused with source 5
[Mon Jun 10 19:51:47 2013] Source is confused with source 4
[Mon Jun 10 19:51:47 2013] Source is confused with source 8
[Mon Jun 10 19:51:47 2013] Source is confused with source 38
[Mon Jun 10 19:53:05 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:53:05 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:53:05 2013] Initial guess for spatial extent in simple fitting = 14.71"
[Mon Jun 10 19:53:05 2013] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.062
[Mon Jun 10 19:53:05 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 14.71"
[Mon Jun 10 19:53:05 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun 10 19:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src2.csv
[Mon Jun 10 19:53:05 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun 10 19:53:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src2.csv
[Mon Jun 10 19:53:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:53:08 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun 10 19:53:08 2013] fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun 10 19:53:08 2013] Fit fullrun_mos1_xmm0111090601_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Jun 10 19:54:01 2013] Warning, spatial fit 2 centroid is now closest to src. 40
[Mon Jun 10 19:54:01 2013] Spatial fit model total counts = 2615.450000, observed total counts = 2582.000000
[Mon Jun 10 19:54:01 2013] Offset between fit and detection position for source 1 = 1.305092 pixels
[Mon Jun 10 19:54:01 2013] Warning, changing simple spatial fit ID from 2 to 4
[Mon Jun 10 19:54:01 2013] 1471.586000 total counts/ 173.646000 bgd. counts: snr = 98.496824
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.305092 pixels
  Position = (210.3, 426.4) = 15 4 8.67 -41 53 5.4
  Extent = 22.1 (22.1-22.1)", rotation angle = 0
  Source counts = 1297.9 +/- 38.4
  Background counts = 173.6
  Rate = 0.1 +/- 0.003
[Mon Jun 10 19:54:01 2013] Spatial fit model total counts = 2368.390000, observed total counts = 2354.000000
[Mon Jun 10 19:54:01 2013] Offset between fit and detection position for source 1 = 1.109102 pixels
[Mon Jun 10 19:54:01 2013] Warning, changing simple spatial fit ID from 4 to 8
[Mon Jun 10 19:54:01 2013] 2250.712000 total counts/ 1697.390000 bgd. counts: snr = 13.430343
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.109102 pixels
  Position = (209.7, 427.3) = 15 4 8.92 -41 53 1.4
  Extent = 14.3 (12.5-18.2)", rotation angle = 0
  Source counts = 553.3 +/- 47.4
  Background counts = 1697.4
  Rate = 0.04 +/- 0.004
[Mon Jun 10 19:54:02 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 19:54:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 19:54:02 2013] Assessing source extent using major axis lower bound
[Mon Jun 10 19:54:02 2013] Source does appear to be extended
[Mon Jun 10 19:54:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:55:21 2013] XMMSAS src. selection expression = ellipse(18196.881400, 37129.370000, 860.748025, 860.748025, 0.000000, X, Y)
[Mon Jun 10 19:55:21 2013] Not overwriting source region fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 10 19:55:21 2013] Extracting stamp from image fullrun_mos1_xmm0111090601_pi300-10000_cl_sm2.00.img.gz, (160, 378) - (259, 477)
[Mon Jun 10 19:55:21 2013] XMMSAS bgd. selection expression = annulus(18196.881400, 37129.370000, 1434.580041, 2869.160083, X, Y) && !ellipse(18549.834000, 38368.050000, 2005.280058, 2005.280058, 0.000000, X, Y) && !ellipse(18008.742420, 36371.102000, 1023.872029, 1023.872029, 0.000000, X, Y) && !ellipse(18974.085400, 39161.301200, 1429.960041, 1429.960041, 0.000000, X, Y) && !ellipse(19235.783462, 39645.320393, 2084.168060, 1292.649668, 99.192980, X, Y) && !ellipse(18440.708000, 37305.978000, 1319.168038, 1319.168038, 0.000000, X, Y) && !ellipse(17978.011246, 35532.997253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18118.272200, 36662.718000, 1705.048049, 1073.696031, 90.000000, X, Y) && !ellipse(18000.299600, 34690.327200, 757.938422, 491.103214, 352.483820, X, Y) && !ellipse(19318.541200, 40594.860000, 1947.688056, 1947.688056, 0.000000, X, Y) && !ellipse(18125.904343, 33972.251556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19247.663513, 33784.283447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19044.427658, 36941.394714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19730.722198, 40838.173248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19596.787032, 38870.684030, 1829.405187, 880.143992, 253.860000, X, Y) && !ellipse(19867.930130, 37637.694733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18866.551315, 35023.507751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20463.356000, 35862.476000, 1197.104034, 1197.104034, 0.000000, X, Y) && !ellipse(17212.951279, 33528.115601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17334.781281, 34136.024384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20384.101013, 38491.448608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20742.096000, 37074.970000, 1625.960047, 808.024023, 19.076000, X, Y) && !ellipse(21210.982010, 39175.423981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19548.528778, 36759.631409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21483.195526, 40490.406891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21603.060806, 38784.457642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20309.502655, 40842.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20892.695770, 38301.794556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20951.198013, 36520.673462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20431.514526, 36649.176880, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 19:55:21 2013] Writing fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1.gif
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0111090601/products/events/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Jun 10 19:55:28 2013] Mean detx,y = (11445.33, -5547.98) 
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_src.img and ../../xmm0111090601/products/images/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0111090601/products/spectra/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Mon Jun 10 19:55:28 2013] Setting source spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 10 19:55:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 10 19:55:28 2013] ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0111090601/products/lightcurves/fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Mon Jun 10 19:55:46 2013] fullrun_mos1_xmm0111090601_pi300-10000_pass1_cl_src1.arf exists, delete to re-create