[Thu May 30 09:07:41 2013] Detection parameters:
  Position = (292.4, 291.2) = 15 2 28.33 -42 9 46.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.0 +/- 11.0
  Background counts = 15.0
  Rate = 0.07 +/- 0.01

[Thu May 30 09:07:42 2013] Off-axis axis estimate = 0.68'
[Thu May 30 09:09:00 2013] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:00 2013] Initial guess for spatial extent in simple fitting = 6.77"
[Thu May 30 09:09:00 2013] source mask rpix=1.6, npix_max = 16, mask sum = 14, frac = 0.828
[Thu May 30 09:09:00 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 6.77"
[Thu May 30 09:09:01 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src9.ximg exists
[Thu May 30 09:09:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src9.csv
[Thu May 30 09:09:01 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu May 30 09:09:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src9.csv
[Thu May 30 09:09:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:02 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu May 30 09:09:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu May 30 09:09:02 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu May 30 09:09:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu May 30 09:09:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:29 2013] Source 9 is offset by -1.755725 and 5.282175 pixels which is larger than
2 X fitted extent = 0.890846 x 0.890846, not incorporating fit results
[Thu May 30 09:09:29 2013] Source 9 is offset by -3.370289 and -2.043733 pixels which is larger than
2 X fitted extent = 0.890846 x 0.890846, not incorporating fit results
[Thu May 30 09:09:29 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:29 2013] Assessing source extent using major
[Thu May 30 09:09:29 2013] Source does appear to be extended
[Thu May 30 09:09:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:29 2013] Source is confused with source 12
[Thu May 30 09:11:02 2013] Using EEF radius (= 6.77 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:02 2013] Initial guess for spatial extent in simple fitting = 6.77"
[Thu May 30 09:11:02 2013] source mask rpix=1.6, npix_max = 16, mask sum = 14, frac = 0.828
[Thu May 30 09:11:02 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 6.77"
[Thu May 30 09:11:03 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src8.ximg exists
[Thu May 30 09:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src8.csv
[Thu May 30 09:11:03 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu May 30 09:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src8.csv
[Thu May 30 09:11:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:03 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu May 30 09:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu May 30 09:11:03 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu May 30 09:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu May 30 09:11:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:31 2013] Spatial fit model total counts = 365.514000, observed total counts = 275.000000
[Thu May 30 09:11:31 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 09:11:31 2013] Source 9 is offset by -3.324323 and -2.022239 pixels which is larger than
2 X fitted extent = 0.847766 x 0.847766, not incorporating fit results
[Thu May 30 09:11:31 2013] Spatial fit model total counts = 666.232000, observed total counts = 659.000000
[Thu May 30 09:11:31 2013] Offset between fit and detection position for source 9 = 0.565391 pixels
[Thu May 30 09:11:31 2013] Warning, changing simple spatial fit ID from 8 to 16
[Thu May 30 09:11:31 2013] 679.511000 total counts/ 469.917000 bgd. counts: snr = 9.668704
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.565391 pixels
  Position = (292.5, 291.8) = 15 2 28.27 -42 9 44.0
  Extent = 27.2 (27.2-54.5)", rotation angle = 0
  Source counts = 209.6 +/- 26.1
  Background counts = 469.9
  Rate = 0.4 +/- 0.05
[Thu May 30 09:11:31 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:11:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:11:31 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:11:31 2013] Source does appear to be extended
[Thu May 30 09:11:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:12:54 2013] XMMSAS src. selection expression = ellipse(25401.376000, 25336.818000, 1634.328047, 1634.328047, 0.000000, X, Y)
[Thu May 30 09:12:54 2013] Not overwriting source region fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_src.reg
[Thu May 30 09:12:54 2013] Extracting stamp from image fullrun_pn_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (199, 198) - (386, 386)
[Thu May 30 09:12:54 2013] XMMSAS bgd. selection expression = annulus(25401.376000, 25336.818000, 2723.880078, 5447.760157, X, Y) && !ellipse(31927.330600, 28694.755600, 1488.072043, 1488.072043, 0.000000, X, Y) && !ellipse(29698.472137, 27176.605835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28863.936000, 26833.322200, 1206.480035, 1206.480035, 0.000000, X, Y) && !ellipse(28522.772000, 26515.730000, 1244.760036, 1244.760036, 0.000000, X, Y) && !ellipse(28168.428000, 26377.112000, 1788.648051, 1788.648051, 0.000000, X, Y) && !ellipse(24104.028046, 25692.741821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26841.998000, 25940.809200, 1059.000030, 1059.000030, 0.000000, X, Y) && !ellipse(27103.513060, 27650.770600, 539.782416, 539.782416, 0.000000, X, Y) && !ellipse(26096.434000, 25527.176000, 2118.000061, 2118.000061, 0.000000, X, Y) && !ellipse(24681.178314, 25189.844757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24807.995789, 24822.832092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26304.448000, 25627.020000, 1089.552031, 1089.552031, 0.000000, X, Y) && !ellipse(22799.200623, 24287.171967, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:12:54 2013] Writing fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9.gif
[Thu May 30 09:12:54 2013] ../../xmm0111090301/products/events/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0111090301/products/events/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Thu May 30 09:12:55 2013] Mean detx,y = (-1753.81, 1598.58) 
[Thu May 30 09:12:55 2013] ../../xmm0111090301/products/images/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_src.img and ../../xmm0111090301/products/images/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Thu May 30 09:12:55 2013] ../../xmm0111090301/products/spectra/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0111090301/products/spectra/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Thu May 30 09:12:55 2013] Setting source spectrum file to fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu May 30 09:12:55 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu May 30 09:12:55 2013] ../../xmm0111090301/products/lightcurves/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0111090301/products/lightcurves/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Thu May 30 09:12:59 2013] fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9.rmf exists, delete to re-create
[Thu May 30 09:12:59 2013] fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9.arf exists, delete to re-create
[Thu May 30 20:50:17 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:17 2013] Total counts from fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 1043.00
[Thu May 30 20:50:18 2013] Total counts from fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_bgd.pi.gz = 3863.00
[Thu May 30 20:50:18 2013] Got source and background scale factors 7516807.000000, 54616779.000000
[Thu May 30 20:50:18 2013] User source parameters:
  Position = (292.5, 291.8) = 15 2 28.27 -42 9 44.0
  Extent = 27.2 (27.2-54.5)", rotation angle = 0
  Source aperture counts = 511.3 +/- 33.3
  Background aperture counts = 531.7
  Rate = 1 +/- 0.07

[Thu May 30 20:50:21 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:21 2013] Using photon index=1.80, rate=0.412, arf fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9.arf
[Thu May 30 20:50:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:21 2013] Updating source flux to 1.4e-12
[Thu May 30 20:52:01 2013] Flag b found in src. 9 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] Flag p found in src. 9 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] Flag c found in src. 9 procflags, skipping spectral fitting
[Thu May 30 20:52:05 2013] xmm0111090301/analysis//spectral/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete