[Thu May 30 09:07:40 2013] Detection parameters:
  Position = (341.9, 312.9) = 15 2 8.95 -42 8 12.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.7 +/- 10.0
  Background counts = 18.6
  Rate = 0.03 +/- 0.007

[Thu May 30 09:07:42 2013] Off-axis axis estimate = 3.32'
[Thu May 30 09:09:00 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:00 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Thu May 30 09:09:00 2013] source mask rpix=1.9, npix_max = 22, mask sum = 13, frac = 0.584
[Thu May 30 09:09:00 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 8.09"
[Thu May 30 09:09:01 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 30 09:09:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src2.csv
[Thu May 30 09:09:01 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 30 09:09:01 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src2.csv
[Thu May 30 09:09:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:02 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 30 09:09:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 30 09:09:02 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 30 09:09:02 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Thu May 30 09:09:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:29 2013] Source 2 is offset by -7.519952 and -3.159140 pixels which is larger than
2 X fitted extent = 0.929894 x 0.929894, not incorporating fit results
[Thu May 30 09:09:29 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:29 2013] Assessing source extent using major
[Thu May 30 09:09:29 2013] Source does appear to be extended
[Thu May 30 09:09:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:29 2013] Source is confused with source 3
[Thu May 30 09:11:02 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:02 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Thu May 30 09:11:02 2013] source mask rpix=1.9, npix_max = 22, mask sum = 13, frac = 0.584
[Thu May 30 09:11:02 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 8.09"
[Thu May 30 09:11:02 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src2.ximg exists
[Thu May 30 09:11:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src2.csv
[Thu May 30 09:11:02 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu May 30 09:11:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src2.csv
[Thu May 30 09:11:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:03 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu May 30 09:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 30 09:11:03 2013] fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu May 30 09:11:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu May 30 09:11:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:31 2013] Spatial fit model total counts = 377.092000, observed total counts = 247.000000
[Thu May 30 09:11:31 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 09:11:31 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 29.174444 pixels away
[Thu May 30 09:11:31 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:11:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:11:31 2013] Assessing source extent using major
[Thu May 30 09:11:31 2013] Source does appear to be extended
[Thu May 30 09:11:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:12:53 2013] XMMSAS src. selection expression = ellipse(29698.472137, 27176.605835, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 09:12:53 2013] Not overwriting source region fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_src.reg
[Thu May 30 09:12:53 2013] Extracting stamp from image fullrun_pn_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (304, 275) - (379, 350)
[Thu May 30 09:12:53 2013] XMMSAS bgd. selection expression = annulus(29698.472137, 27176.605835, 1087.500000, 2175.000000, X, Y) && !ellipse(31927.330600, 28694.755600, 1488.072043, 1488.072043, 0.000000, X, Y) && !ellipse(28863.936000, 26833.322200, 1206.480035, 1206.480035, 0.000000, X, Y) && !ellipse(28522.772000, 26515.730000, 1244.760036, 1244.760036, 0.000000, X, Y) && !ellipse(28168.428000, 26377.112000, 1788.648051, 1788.648051, 0.000000, X, Y) && !ellipse(26841.998000, 25940.809200, 1059.000030, 1059.000030, 0.000000, X, Y) && !ellipse(25401.376000, 25336.818000, 2179.104063, 2179.104063, 0.000000, X, Y) && !ellipse(27103.513060, 27650.770600, 539.782416, 539.782416, 0.000000, X, Y) && !ellipse(26096.434000, 25527.176000, 2118.000061, 2118.000061, 0.000000, X, Y)
[Thu May 30 09:12:53 2013] Writing fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2.gif
[Thu May 30 09:12:54 2013] ../../xmm0111090301/products/events/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0111090301/products/events/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu May 30 09:12:54 2013] Mean detx,y = (2748.05, 1468.68) 
[Thu May 30 09:12:54 2013] ../../xmm0111090301/products/images/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_src.img and ../../xmm0111090301/products/images/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu May 30 09:12:54 2013] ../../xmm0111090301/products/spectra/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0111090301/products/spectra/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu May 30 09:12:54 2013] Setting source spectrum file to fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu May 30 09:12:54 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu May 30 09:12:54 2013] ../../xmm0111090301/products/lightcurves/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0111090301/products/lightcurves/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu May 30 09:12:59 2013] Not generating rmf since there are only 51 counts
[Thu May 30 09:12:59 2013] rmf not generated due to insufficient counts
[Thu May 30 09:12:59 2013] fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Thu May 30 20:50:16 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:16 2013] Total counts from fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 175.00
[Thu May 30 20:50:16 2013] Total counts from fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 464.00
[Thu May 30 20:50:16 2013] Got source and background scale factors 1021304.000000, 4596477.000000
[Thu May 30 20:50:16 2013] User source parameters:
  Position = (341.9, 312.9) = 15 2 8.95 -42 8 12.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 71.9 +/- 14.3
  Background aperture counts = 103.1
  Rate = 0.1 +/- 0.03

[Thu May 30 20:50:16 2013] Updating counts from extracted products
[Thu May 30 20:50:16 2013] Set source signif. to 71.90/10.15 = 7.08
[Thu May 30 20:50:21 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:21 2013] Using photon index=1.80, rate=0.142, arf fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2.arf
[Thu May 30 20:50:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:21 2013] Updating source flux to 5e-13
[Thu May 30 20:52:01 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:52:05 2013] xmm0111090301/analysis//spectral/fullrun_pn_xmm0111090301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete