[Thu May 30 09:08:00 2013] Detection parameters:
  Position = (274.0, 289.0) = 15 2 35.53 -42 9 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.3 +/- 17.7
  Background counts = 23.3
  Rate = 0.03 +/- 0.004

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 1.90'
[Thu May 30 09:09:09 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 7.38"
[Thu May 30 09:09:09 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.829
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 7.38"
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src22.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src22.csv
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src22.csv
[Thu May 30 09:09:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu May 30 09:09:15 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu May 30 09:10:31 2013] Warning, spatial fit 22 centroid is now closest to src. 79
[Thu May 30 09:10:32 2013] Spatial fit model total counts = 691.579000, observed total counts = 694.000000
[Thu May 30 09:10:32 2013] Offset between fit and detection position for source 98 = 0.967802 pixels
[Thu May 30 09:10:32 2013] Warning, changing simple spatial fit ID from 22 to 66
[Thu May 30 09:10:32 2013] 671.741500 total counts/ 627.677000 bgd. counts: snr = 1.758817
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 0.967802 pixels
  Position = (274.9, 289.1) = 15 2 35.16 -42 9 55.8
  Extent = 10.0 (4.8-15.1)", rotation angle = 0
  Source counts = 44.1 +/- 25.9
  Background counts = 627.7
  Rate = 0.01 +/- 0.006
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 97
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 9.99"
[Thu May 30 09:11:12 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.150
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 9.99"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src21.ximg exists
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src21_1.ximg exists
[Thu May 30 09:11:14 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src21 appears to have run properly
[Thu May 30 09:11:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Thu May 30 09:11:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Thu May 30 09:11:18 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 856.343000, observed total counts = 855.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 98 = 0.623372 pixels
[Thu May 30 09:12:25 2013] 753.927000 total counts/ 664.111000 bgd. counts: snr = 3.485245
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 0.623372 pixels
  Position = (275.2, 289.6) = 15 2 35.04 -42 9 53.5
  Extent = 10.8 (4.6-16.4)", rotation angle = 0
  Source counts = 89.8 +/- 27.5
  Background counts = 664.1
  Rate = 0.02 +/- 0.007
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:31 2013] XMMSAS src. selection expression = ellipse(23895.985720, 25147.928200, 650.544019, 650.544019, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src98_src.reg
[Thu May 30 16:23:31 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (238, 252) - (313, 327)
[Thu May 30 16:23:31 2013] XMMSAS bgd. selection expression = annulus(23895.985720, 25147.928200, 1084.240031, 2168.480062, X, Y) && !ellipse(26426.092000, 25667.978000, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(25904.662800, 25453.947400, 1644.976047, 775.148022, 332.946000, X, Y) && !ellipse(25697.972229, 26239.396423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26106.278000, 26614.812000, 1108.440032, 1108.440032, 0.000000, X, Y) && !ellipse(25223.856000, 25149.024000, 1577.992045, 1577.992045, 0.000000, X, Y) && !ellipse(22989.148600, 24338.314200, 669.831219, 669.831219, 0.000000, X, Y) && !ellipse(26678.235596, 26839.417114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(24573.676178, 25520.942841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21002.195816, 24415.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20941.458600, 25413.954200, 871.944025, 871.944025, 0.000000, X, Y) && !ellipse(24498.682220, 26042.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21264.106491, 23975.614899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.896179, 25856.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.458817, 25519.724182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.391785, 25249.115631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21819.651459, 26160.738525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.373169, 26781.975555, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src98.gif
[Thu May 30 16:35:18 2013] Mean detx,y = (3338.13, -1678.28) 
[Thu May 30 16:35:20 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:35:29 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:35:30 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src98_src_b10.pi.gz
[Thu May 30 16:35:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src98_bgd.pi.gz
[Thu May 30 19:17:06 2013] Not generating rmf since there are only 89 counts
[Thu May 30 19:17:06 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:53 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:54 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src98_src_b10.pi.gz = 608.00
[Thu May 30 20:50:54 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src98_bgd.pi.gz = 206.00
[Thu May 30 20:50:54 2013] Got source and background scale factors 1334400.000000, 2099980.000000
[Thu May 30 20:50:54 2013] User source parameters:
  Position = (275.2, 289.6) = 15 2 35.04 -42 9 53.5
  Extent = 10.8 (4.6-16.4)", rotation angle = 0
  Source aperture counts = 477.1 +/- 25.7
  Background aperture counts = 130.9
  Rate = 0.1 +/- 0.006

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0213, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src98.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 2.4e-13
[Thu May 30 20:51:40 2013] Flag c found in src. 98 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] Source 98 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src98_pl.csv not found, spectral fit skipped or did not complete