[Thu May 30 09:07:59 2013] Detection parameters:
  Position = (195.9, 286.8) = 15 3 6.08 -42 10 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.5 +/- 10.1
  Background counts = 14.0
  Rate = 0.02 +/- 0.004

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 7.48'
[Thu May 30 09:09:09 2013] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 10.17"
[Thu May 30 09:09:09 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.118
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 10.17"
[Thu May 30 09:09:12 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src68.ximg exists
[Thu May 30 09:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src68.csv
[Thu May 30 09:09:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src68_1.ximg exists
[Thu May 30 09:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src68.csv
[Thu May 30 09:09:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Thu May 30 09:09:16 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Thu May 30 09:10:32 2013] Warning, spatial fit 68 centroid is now closest to src. 83
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:11:12 2013] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 10.17"
[Thu May 30 09:11:12 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.118
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 10.17"
[Thu May 30 09:11:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src53.ximg exists
[Thu May 30 09:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src53.csv
[Thu May 30 09:11:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src53_1.ximg exists
[Thu May 30 09:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src53.csv
[Thu May 30 09:11:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Thu May 30 09:11:19 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 280.989000, observed total counts = 281.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 88 = 3.784630 pixels
[Thu May 30 09:12:25 2013] 286.521600 total counts/ 222.262000 bgd. counts: snr = 4.310279
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 3.784630 pixels
  Position = (197.0, 283.1) = 15 3 5.67 -42 10 21.2
  Extent = 13.2 (2.5-20.3)", rotation angle = 0
  Source counts = 64.3 +/- 16.9
  Background counts = 222.3
  Rate = 0.02 +/- 0.004
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:33 2013] XMMSAS src. selection expression = ellipse(17086.996600, 24585.512000, 790.320023, 790.320023, 0.000000, X, Y)
[Thu May 30 16:23:33 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src88_src.reg
[Thu May 30 16:23:33 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (152, 238) - (242, 329)
[Thu May 30 16:23:33 2013] XMMSAS bgd. selection expression = annulus(17086.996600, 24585.512000, 1317.200038, 2634.400076, X, Y) && !ellipse(17415.620285, 27015.509277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18010.581400, 27015.292300, 1616.608047, 1616.608047, 0.000000, X, Y) && !ellipse(15674.279600, 24660.191600, 1724.128050, 1724.128050, 0.000000, X, Y)
[Thu May 30 16:23:33 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src88.gif
[Thu May 30 16:57:25 2013] Mean detx,y = (9911.21, -2.20) 
[Thu May 30 16:57:27 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:57:36 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:57:36 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Thu May 30 16:57:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Thu May 30 20:22:45 2013] Not generating rmf since there are only 64 counts
[Thu May 30 20:22:45 2013] rmf not generated due to insufficient counts
[Thu May 30 20:51:00 2013] Updating aperture counts using extracted products
[Thu May 30 20:51:00 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src88_src_b10.pi.gz = 282.00
[Thu May 30 20:51:00 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src88_bgd.pi.gz = 681.00
[Thu May 30 20:51:00 2013] Got source and background scale factors 1963200.000000, 7916800.000000
[Thu May 30 20:51:00 2013] User source parameters:
  Position = (197.0, 283.1) = 15 3 5.67 -42 10 21.2
  Extent = 13.2 (2.5-20.3)", rotation angle = 0
  Source aperture counts = 113.1 +/- 17.8
  Background aperture counts = 168.9
  Rate = 0.03 +/- 0.004

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0152, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src88.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 3e-13
[Thu May 30 20:51:40 2013] Source 88 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src88_pl.csv not found, spectral fit skipped or did not complete