[Thu May 30 09:07:59 2013] Detection parameters:
  Position = (242.1, 292.0) = 15 2 47.98 -42 9 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.0 +/- 13.4
  Background counts = 19.8
  Rate = 0.02 +/- 0.003

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 4.11'
[Thu May 30 09:09:09 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Thu May 30 09:09:09 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.833
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 8.48"
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src47.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src47.csv
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src47_1.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src47.csv
[Thu May 30 09:09:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Thu May 30 09:09:16 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Thu May 30 09:10:32 2013] Spatial fit model total counts = 509.241000, observed total counts = 473.000000
[Thu May 30 09:10:32 2013] Offset between fit and detection position for source 86 = 1.130412 pixels
[Thu May 30 09:10:32 2013] 512.842300 total counts/ 460.604000 bgd. counts: snr = 2.434026
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 1.130412 pixels
  Position = (241.3, 292.7) = 15 2 48.33 -42 9 40.0
  Extent = 10.9 (2.1-17.0)", rotation angle = 0
  Source counts = 52.2 +/- 22.6
  Background counts = 460.6
  Rate = 0.01 +/- 0.005
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 10.90"
[Thu May 30 09:11:12 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.996
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 10.90"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src38.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src38.csv
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src38_1.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src38.csv
[Thu May 30 09:11:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Thu May 30 09:11:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Thu May 30 09:11:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu May 30 09:11:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:12:25 2013] Warning, spatial fit 38 centroid is now closest to src. 72
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:32 2013] XMMSAS src. selection expression = ellipse(20941.458600, 25413.954200, 653.958019, 653.958019, 0.000000, X, Y)
[Thu May 30 16:23:32 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src86_src.reg
[Thu May 30 16:23:32 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (204, 255) - (279, 330)
[Thu May 30 16:23:32 2013] XMMSAS bgd. selection expression = annulus(20941.458600, 25413.954200, 1089.930031, 2179.860063, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(22989.148600, 24338.314200, 669.831219, 669.831219, 0.000000, X, Y) && !ellipse(21002.195816, 24415.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18010.581400, 27015.292300, 1616.608047, 1616.608047, 0.000000, X, Y) && !ellipse(21264.106491, 23975.614899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.896179, 25856.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.458817, 25519.724182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.391785, 25249.115631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21819.651459, 26160.738525, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:32 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src86.gif
[Thu May 30 16:51:53 2013] Mean detx,y = (6000.16, -495.95) 
[Thu May 30 16:52:00 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:52:18 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:52:18 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Thu May 30 16:52:18 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Thu May 30 20:06:25 2013] Not generating rmf since there are only 52 counts
[Thu May 30 20:06:25 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:57 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:57 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src86_src_b10.pi.gz = 338.00
[Thu May 30 20:50:57 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src86_bgd.pi.gz = 864.00
[Thu May 30 20:50:57 2013] Got source and background scale factors 1263616.000000, 5184222.000000
[Thu May 30 20:50:57 2013] User source parameters:
  Position = (241.3, 292.7) = 15 2 48.33 -42 9 40.0
  Extent = 10.9 (2.1-17.0)", rotation angle = 0
  Source aperture counts = 127.4 +/- 19.4
  Background aperture counts = 210.6
  Rate = 0.03 +/- 0.005

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0124, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src86.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 1.9e-13
[Thu May 30 20:51:40 2013] Source 86 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete