[Thu May 30 09:07:59 2013] Detection parameters:
  Position = (283.0, 293.9) = 15 2 31.99 -42 9 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.5 +/- 16.8
  Background counts = 26.4
  Rate = 0.02 +/- 0.003

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 1.17'
[Thu May 30 09:09:09 2013] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 7.01"
[Thu May 30 09:09:09 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 7.01"
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src40.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src40.csv
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src40.csv
[Thu May 30 09:09:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu May 30 09:09:16 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src40 appears to have run properly
[Thu May 30 09:10:32 2013] Warning, spatial fit 40 centroid is now closest to src. 79
[Thu May 30 09:10:32 2013] Source 81 is offset by 5.608922 and -0.912703 pixels which is larger than
2 X fitted extent = 3.017959 x 3.017959, not incorporating fit results
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 89
[Thu May 30 09:11:12 2013] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 7.01"
[Thu May 30 09:11:12 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 7.01"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src33.ximg exists
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu May 30 09:11:14 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src33 appears to have run properly
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu May 30 09:11:19 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu May 30 09:12:25 2013] Source 81 is offset by 6.460715 and 0.890589 pixels which is larger than
2 X fitted extent = 5.696322 x 5.696322, not incorporating fit results
[Thu May 30 09:12:25 2013] Source 81 is offset by 5.589864 and -0.931485 pixels which is larger than
2 X fitted extent = 2.834662 x 2.834662, not incorporating fit results
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:32 2013] XMMSAS src. selection expression = ellipse(24573.676178, 25520.942841, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 16:23:32 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src81_src.reg
[Thu May 30 16:23:32 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (246, 256) - (321, 331)
[Thu May 30 16:23:32 2013] XMMSAS bgd. selection expression = annulus(24573.676178, 25520.942841, 1087.500000, 2175.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(27352.472000, 26238.041400, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(26426.092000, 25667.978000, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(25904.662800, 25453.947400, 1644.976047, 775.148022, 332.946000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(27192.660797, 26736.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25697.972229, 26239.396423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(26106.278000, 26614.812000, 1108.440032, 1108.440032, 0.000000, X, Y) && !ellipse(25223.856000, 25149.024000, 1577.992045, 1577.992045, 0.000000, X, Y) && !ellipse(22989.148600, 24338.314200, 669.831219, 669.831219, 0.000000, X, Y) && !ellipse(26678.235596, 26839.417114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(24498.682220, 26042.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.853699, 28474.628418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.896179, 25856.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.458817, 25519.724182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.391785, 25249.115631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21819.651459, 26160.738525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.373169, 26781.975555, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:32 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src81.gif
[Thu May 30 16:48:46 2013] Mean detx,y = (2591.66, -1579.04) 
[Thu May 30 16:48:48 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:49:04 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:49:04 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Thu May 30 16:49:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Thu May 30 19:55:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 19:55:23 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:56 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:56 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src81_src_b10.pi.gz = 689.00
[Thu May 30 20:50:56 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src81_bgd.pi.gz = 147.00
[Thu May 30 20:50:56 2013] Got source and background scale factors 1337600.000000, 931012.000000
[Thu May 30 20:50:56 2013] User source parameters:
  Position = (283.0, 293.9) = 15 2 31.99 -42 9 33.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 477.8 +/- 27.3
  Background aperture counts = 211.2
  Rate = 0.1 +/- 0.006

[Thu May 30 20:50:56 2013] Updating counts from extracted products
[Thu May 30 20:50:56 2013] Set source signif. to 477.80/14.53 = 32.88
[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.113, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src81.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 1.2e-12
[Thu May 30 20:51:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src81_pl.csv not found, spectral fit skipped or did not complete