[Thu May 30 09:07:58 2013] Detection parameters:
  Position = (264.4, 281.0) = 15 2 39.29 -42 10 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.4 +/- 16.3
  Background counts = 17.8
  Rate = 0.03 +/- 0.004

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 2.78'
[Thu May 30 09:09:09 2013] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 7.82"
[Thu May 30 09:09:09 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 7.82"
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src27.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src27.csv
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src27.csv
[Thu May 30 09:09:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu May 30 09:09:15 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Thu May 30 09:10:31 2013] Spatial fit model total counts = 603.757000, observed total counts = 601.000000
[Thu May 30 09:10:31 2013] Offset between fit and detection position for source 78 = 0.592177 pixels
[Thu May 30 09:10:31 2013] 614.380000 total counts/ 545.290000 bgd. counts: snr = 2.958703
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.592177 pixels
  Position = (264.6, 280.4) = 15 2 39.19 -42 10 33.3
  Extent = 8.6 (5.3-15.6)", rotation angle = 0
  Source counts = 69.1 +/- 24.8
  Background counts = 545.3
  Rate = 0.02 +/- 0.006
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 8.59"
[Thu May 30 09:11:12 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.020
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 8.59"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src25.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src25.csv
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src25.csv
[Thu May 30 09:11:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu May 30 09:11:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May 30 09:11:18 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 563.812000, observed total counts = 560.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 78 = 0.224998 pixels
[Thu May 30 09:12:25 2013] 586.494600 total counts/ 522.601000 bgd. counts: snr = 2.794938
Spatial fit parameters:
  Offset between fit and detection position for source 78 = 0.224998 pixels
  Position = (264.8, 280.3) = 15 2 39.12 -42 10 33.9
  Extent = 8.4 (5.1-17.2)", rotation angle = 0
  Source counts = 63.9 +/- 24.2
  Background counts = 522.6
  Rate = 0.02 +/- 0.006
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:31 2013] XMMSAS src. selection expression = ellipse(22989.148600, 24338.314200, 502.373414, 502.373414, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src78_src.reg
[Thu May 30 16:23:31 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (236, 251) - (294, 309)
[Thu May 30 16:23:31 2013] XMMSAS bgd. selection expression = annulus(22989.148600, 24338.314200, 837.289024, 1674.578048, X, Y) && !ellipse(25904.662800, 25453.947400, 1644.976047, 775.148022, 332.946000, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(25223.856000, 25149.024000, 1577.992045, 1577.992045, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(24573.676178, 25520.942841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21002.195816, 24415.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20941.458600, 25413.954200, 871.944025, 871.944025, 0.000000, X, Y) && !ellipse(24498.682220, 26042.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21264.106491, 23975.614899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.896179, 25856.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.458817, 25519.724182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.391785, 25249.115631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21819.651459, 26160.738525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.373169, 26781.975555, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src78.gif
[Thu May 30 16:36:43 2013] Mean detx,y = (4456.78, -2111.41) 
[Thu May 30 16:36:45 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:36:57 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:36:57 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Thu May 30 16:36:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Thu May 30 19:34:23 2013] Not generating rmf since there are only 63 counts
[Thu May 30 19:34:23 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:54 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:55 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src78_src_b10.pi.gz = 261.00
[Thu May 30 20:50:55 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src78_bgd.pi.gz = 116.00
[Thu May 30 20:50:55 2013] Got source and background scale factors 795200.000000, 2174400.000000
[Thu May 30 20:50:55 2013] User source parameters:
  Position = (264.8, 280.3) = 15 2 39.12 -42 10 33.9
  Extent = 8.4 (5.1-17.2)", rotation angle = 0
  Source aperture counts = 218.6 +/- 17.2
  Background aperture counts = 42.4
  Rate = 0.05 +/- 0.004

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0151, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src78.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 2.2e-13
[Thu May 30 20:51:40 2013] Source 78 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src78_pl.csv not found, spectral fit skipped or did not complete