[Thu May 30 09:07:58 2013] Detection parameters:
  Position = (282.2, 299.9) = 15 2 32.33 -42 9 6.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.2 +/- 15.6
  Background counts = 31.6
  Rate = 0.02 +/- 0.003

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 1.19'
[Thu May 30 09:09:09 2013] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 7.02"
[Thu May 30 09:09:09 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 7.02"
[Thu May 30 09:09:12 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src55.ximg exists
[Thu May 30 09:09:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src55.csv
[Thu May 30 09:09:12 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src55_1.ximg exists
[Thu May 30 09:09:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src55.csv
[Thu May 30 09:09:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Thu May 30 09:09:16 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Thu May 30 09:10:32 2013] Warning, spatial fit 55 centroid is now closest to src. 81
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 75
[Thu May 30 09:11:12 2013] Using EEF radius (= 7.02 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 7.02"
[Thu May 30 09:11:12 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.895
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 7.02"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src43.ximg exists
[Thu May 30 09:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src43.csv
[Thu May 30 09:11:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src43_1.ximg exists
[Thu May 30 09:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src43.csv
[Thu May 30 09:11:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Thu May 30 09:11:19 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Thu May 30 09:12:25 2013] Warning, spatial fit 43 centroid is now closest to src. 81
[Thu May 30 09:12:25 2013] Source 74 is offset by -5.174549 and -2.572189 pixels which is larger than
2 X fitted extent = 2.765407 x 4.544460, not incorporating fit results
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:32 2013] XMMSAS src. selection expression = ellipse(24498.682220, 26042.621582, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 16:23:32 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src74_src.reg
[Thu May 30 16:23:32 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (245, 262) - (320, 337)
[Thu May 30 16:23:32 2013] XMMSAS bgd. selection expression = annulus(24498.682220, 26042.621582, 1087.500000, 2175.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(27352.472000, 26238.041400, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(26426.092000, 25667.978000, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(25904.662800, 25453.947400, 1644.976047, 775.148022, 332.946000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(27192.660797, 26736.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25697.972229, 26239.396423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(26106.278000, 26614.812000, 1108.440032, 1108.440032, 0.000000, X, Y) && !ellipse(25223.856000, 25149.024000, 1577.992045, 1577.992045, 0.000000, X, Y) && !ellipse(22989.148600, 24338.314200, 669.831219, 669.831219, 0.000000, X, Y) && !ellipse(26678.235596, 26839.417114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(24573.676178, 25520.942841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.896179, 25856.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.458817, 25519.724182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.391785, 25249.115631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21819.651459, 26160.738525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.373169, 26781.975555, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:32 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src74.gif
[Thu May 30 16:53:26 2013] Mean detx,y = (2481.91, -1087.57) 
[Thu May 30 16:53:29 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:53:40 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:53:40 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Thu May 30 16:53:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Thu May 30 20:12:47 2013] Not generating rmf since there are only 85 counts
[Thu May 30 20:12:47 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:58 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:58 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src74_src_b10.pi.gz = 632.00
[Thu May 30 20:50:58 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src74_bgd.pi.gz = 504.00
[Thu May 30 20:50:58 2013] Got source and background scale factors 1340800.000000, 2024460.000000
[Thu May 30 20:50:58 2013] User source parameters:
  Position = (282.2, 299.9) = 15 2 32.33 -42 9 6.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 298.2 +/- 26.2
  Background aperture counts = 333.8
  Rate = 0.07 +/- 0.006

[Thu May 30 20:50:58 2013] Updating counts from extracted products
[Thu May 30 20:50:58 2013] Set source signif. to 298.20/18.27 = 16.32
[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0706, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src74.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 7.6e-13
[Thu May 30 20:51:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src74_pl.csv not found, spectral fit skipped or did not complete