[Thu May 30 09:07:58 2013] Detection parameters:
  Position = (251.4, 301.3) = 15 2 44.37 -42 9 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.4 +/- 11.6
  Background counts = 27.6
  Rate = 0.01 +/- 0.003

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 3.42'
[Thu May 30 09:09:09 2013] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 8.14"
[Thu May 30 09:09:09 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.112
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 87 for pass 0, mean size = 8.14"
[Thu May 30 09:09:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src87.ximg exists
[Thu May 30 09:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src87.csv
[Thu May 30 09:09:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src87_1.ximg exists
[Thu May 30 09:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src87.csv
[Thu May 30 09:09:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Thu May 30 09:09:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Thu May 30 09:09:17 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Thu May 30 09:10:32 2013] Warning, spatial fit 87 centroid is now closest to src. 63
[Thu May 30 09:10:32 2013] Source 72 is offset by -5.281567 and -8.103176 pixels which is larger than
2 X fitted extent = 3.735099 x 3.735099, not incorporating fit results
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 82
[Thu May 30 09:11:12 2013] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 8.14"
[Thu May 30 09:11:12 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.112
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 65 for pass 1, mean size = 8.14"
[Thu May 30 09:11:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src65.ximg exists
[Thu May 30 09:11:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src65_1.ximg exists
[Thu May 30 09:11:16 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src65 appears to have run properly
[Thu May 30 09:11:20 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Thu May 30 09:11:20 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Thu May 30 09:11:20 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Thu May 30 09:12:25 2013] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 72 at 11.085426 pixels away
[Thu May 30 09:12:25 2013] Source 72 is offset by -5.474328 and -2.322799 pixels which is larger than
2 X fitted extent = 0.890984 x 0.890984, not incorporating fit results
[Thu May 30 09:12:25 2013] Source 72 is offset by -4.526673 and -8.009902 pixels which is larger than
2 X fitted extent = 1.332584 x 1.332584, not incorporating fit results
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:34 2013] XMMSAS src. selection expression = ellipse(21819.651459, 26160.738525, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 16:23:34 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src72_src.reg
[Thu May 30 16:23:34 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (214, 264) - (289, 339)
[Thu May 30 16:23:34 2013] XMMSAS bgd. selection expression = annulus(21819.651459, 26160.738525, 1087.500000, 2175.000000, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(25223.856000, 25149.024000, 1577.992045, 1577.992045, 0.000000, X, Y) && !ellipse(22989.148600, 24338.314200, 669.831219, 669.831219, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(24573.676178, 25520.942841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21002.195816, 24415.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20941.458600, 25413.954200, 871.944025, 871.944025, 0.000000, X, Y) && !ellipse(24498.682220, 26042.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24886.212000, 29592.571800, 1283.400037, 1283.400037, 0.000000, X, Y) && !ellipse(21264.106491, 23975.614899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.896179, 25856.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.458817, 25519.724182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.391785, 25249.115631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.373169, 26781.975555, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:34 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src72.gif
[Thu May 30 17:02:01 2013] Mean detx,y = (4987.82, -107.61) 
[Thu May 30 17:02:03 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 17:02:25 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 17:02:26 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Thu May 30 17:02:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Thu May 30 20:39:36 2013] Not generating rmf since there are only 50 counts
[Thu May 30 20:39:36 2013] rmf not generated due to insufficient counts
[Thu May 30 20:51:02 2013] Updating aperture counts using extracted products
[Thu May 30 20:51:02 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src72_src_b10.pi.gz = 357.00
[Thu May 30 20:51:02 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src72_bgd.pi.gz = 1001.00
[Thu May 30 20:51:02 2013] Got source and background scale factors 1342400.000000, 5000104.000000
[Thu May 30 20:51:02 2013] User source parameters:
  Position = (251.4, 301.3) = 15 2 44.37 -42 9 1.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 88.3 +/- 19.9
  Background aperture counts = 268.7
  Rate = 0.02 +/- 0.005

[Thu May 30 20:51:02 2013] Updating counts from extracted products
[Thu May 30 20:51:02 2013] Set source signif. to 88.26/16.39 = 5.38
[Thu May 30 20:51:05 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:05 2013] Using photon index=1.80, rate=0.0209, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src72.arf
[Thu May 30 20:51:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:05 2013] Updating source flux to 2.9e-13
[Thu May 30 20:51:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src72_pl.csv not found, spectral fit skipped or did not complete