[Thu May 30 09:07:57 2013] Detection parameters:
  Position = (300.9, 305.0) = 15 2 24.98 -42 8 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.1 +/- 20.6
  Background counts = 36.9
  Rate = 0.03 +/- 0.004

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 0.51'
[Thu May 30 09:09:09 2013] Using EEF radius (= 6.68 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 6.68"
[Thu May 30 09:09:09 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.965
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 6.68"
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src24.ximg exists
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src24_1.ximg exists
[Thu May 30 09:09:11 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src24 appears to have run properly
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Thu May 30 09:09:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Thu May 30 09:09:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src24.csv
[Thu May 30 09:09:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:10:31 2013] Spatial fit model total counts = 1184.040000, observed total counts = 1183.000000
[Thu May 30 09:10:31 2013] Offset between fit and detection position for source 67 = 2.464866 pixels
[Thu May 30 09:10:31 2013] 1186.476100 total counts/ 1088.890000 bgd. counts: snr = 2.957304
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 2.464866 pixels
  Position = (298.7, 305.9) = 15 2 25.88 -42 8 42.7
  Extent = 13.4 (13.3-26.7)" x 9.8 (3.5-13.4)", rotation angle = 327 (327-327) degrees
  Source counts = 97.6 +/- 34.4
  Background counts = 1088.9
  Rate = 0.02 +/- 0.008
[Thu May 30 09:10:31 2013] Spatial fit model total counts = 1179.230000, observed total counts = 1132.000000
[Thu May 30 09:10:31 2013] Offset between fit and detection position for source 67 = 2.084402 pixels
[Thu May 30 09:10:31 2013] Warning, changing simple spatial fit ID from 24 to 31
[Thu May 30 09:10:31 2013] 1201.193000 total counts/ 1023.410000 bgd. counts: snr = 5.557320
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 2.084402 pixels
  Position = (300.6, 306.6) = 15 2 25.10 -42 8 39.8
  Extent = 13.9 (13.5-27.7)", rotation angle = 0
  Source counts = 177.8 +/- 34.7
  Background counts = 1023.4
  Rate = 0.04 +/- 0.008
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 71
[Thu May 30 09:10:32 2013] Source is confused with source 60
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 13.86"
[Thu May 30 09:11:12 2013] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.902
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 13.86"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src22.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src22.csv
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src22.csv
[Thu May 30 09:11:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu May 30 09:11:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu May 30 09:11:18 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 1749.080000, observed total counts = 1746.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 67 = 2.206780 pixels
[Thu May 30 09:12:25 2013] 1736.612000 total counts/ 1592.010000 bgd. counts: snr = 3.624110
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 2.206780 pixels
  Position = (298.4, 306.2) = 15 2 25.96 -42 8 41.2
  Extent = 14.3 (9.5-21.5)", rotation angle = 0
  Source counts = 144.6 +/- 41.7
  Background counts = 1592.0
  Rate = 0.03 +/- 0.01
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 1202.370000, observed total counts = 1132.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 67 = 2.196507 pixels
[Thu May 30 09:12:25 2013] Warning, changing simple spatial fit ID from 22 to 28
[Thu May 30 09:12:25 2013] 1197.171000 total counts/ 1030.500000 bgd. counts: snr = 5.192016
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 2.196507 pixels
  Position = (300.6, 306.5) = 15 2 25.10 -42 8 40.1
  Extent = 13.9 (13.8-27.7)", rotation angle = 0
  Source counts = 166.7 +/- 34.6
  Background counts = 1030.5
  Rate = 0.04 +/- 0.008
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:31 2013] XMMSAS src. selection expression = ellipse(26106.278000, 26614.812000, 831.330024, 831.330024, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src67_src.reg
[Thu May 30 16:23:31 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (253, 259) - (348, 354)
[Thu May 30 16:23:31 2013] XMMSAS bgd. selection expression = annulus(26106.278000, 26614.812000, 1385.550040, 2771.100080, X, Y) && !ellipse(28959.402000, 26798.090000, 1276.712037, 1276.712037, 0.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(27352.472000, 26238.041400, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(29311.689600, 27031.491000, 1276.712037, 738.860821, 344.225000, X, Y) && !ellipse(26426.092000, 25667.978000, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(29845.154000, 27453.336000, 1330.448038, 1330.448038, 0.000000, X, Y) && !ellipse(25904.662800, 25453.947400, 1644.976047, 775.148022, 332.946000, X, Y) && !ellipse(28791.014000, 27849.513600, 1274.480037, 1274.480037, 0.000000, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(27192.660797, 26736.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25697.972229, 26239.396423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(25223.856000, 25149.024000, 1577.992045, 1577.992045, 0.000000, X, Y) && !ellipse(22989.148600, 24338.314200, 669.831219, 669.831219, 0.000000, X, Y) && !ellipse(28016.144000, 27811.530400, 1193.608034, 1193.608034, 0.000000, X, Y) && !ellipse(26678.235596, 26839.417114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(24573.676178, 25520.942841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28792.461975, 28479.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24498.682220, 26042.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.662537, 28484.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.853699, 28474.628418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24886.212000, 29592.571800, 1283.400037, 1283.400037, 0.000000, X, Y) && !ellipse(22740.896179, 25856.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.391785, 25249.115631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28105.752000, 29004.704000, 1244.344036, 1244.344036, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.373169, 26781.975555, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src67.gif
[Thu May 30 16:35:34 2013] Mean detx,y = (788.92, -1065.76) 
[Thu May 30 16:35:37 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:35:49 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:35:49 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Thu May 30 16:35:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Thu May 30 20:50:54 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:54 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src67_src_b10.pi.gz = 1265.00
[Thu May 30 20:50:54 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src67_bgd.pi.gz = 854.00
[Thu May 30 20:50:54 2013] Got source and background scale factors 2179200.000000, 3921156.000000
[Thu May 30 20:50:54 2013] User source parameters:
  Position = (300.6, 306.5) = 15 2 25.10 -42 8 40.1
  Extent = 13.9 (13.8-27.7)", rotation angle = 0
  Source aperture counts = 790.4 +/- 36.6
  Background aperture counts = 474.6
  Rate = 0.2 +/- 0.009

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0395, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src67.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 4.5e-13
[Thu May 30 20:51:40 2013] Flag c found in src. 67 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src67_pl.csv not found, spectral fit skipped or did not complete