[Thu May 30 09:07:56 2013] Detection parameters:
  Position = (365.2, 326.3) = 15 1 59.85 -42 7 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.2 +/- 17.6
  Background counts = 27.0
  Rate = 0.03 +/- 0.004

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 5.24'
[Thu May 30 09:09:09 2013] Using EEF radius (= 9.05 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 9.05"
[Thu May 30 09:09:09 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.938
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.05"
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src21.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src21.csv
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src21.csv
[Thu May 30 09:09:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu May 30 09:09:15 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Thu May 30 09:10:31 2013] Spatial fit model total counts = 865.160000, observed total counts = 863.000000
[Thu May 30 09:10:31 2013] Offset between fit and detection position for source 53 = 6.340754 pixels
[Thu May 30 09:10:31 2013] 813.648000 total counts/ 328.052000 bgd. counts: snr = 26.810429
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 6.340754 pixels
  Position = (368.5, 331.7) = 15 1 58.56 -42 6 50.3
  Extent = 18.1 (17.8-36.2)", rotation angle = 0
  Source counts = 485.6 +/- 28.5
  Background counts = 328.1
  Rate = 0.1 +/- 0.007
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 4
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 18.10"
[Thu May 30 09:11:12 2013] source mask rpix=4.2, npix_max = 86, mask sum = 81, frac = 0.932
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 18.10"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src20.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src20.csv
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src20.csv
[Thu May 30 09:11:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu May 30 09:11:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu May 30 09:11:18 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 2212.030000, observed total counts = 2129.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 53 = 6.057726 pixels
[Thu May 30 09:12:25 2013] Warning, changing simple spatial fit ID from 20 to 5
[Thu May 30 09:12:25 2013] 1898.208000 total counts/ 884.388000 bgd. counts: snr = 34.090976
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 6.057726 pixels
  Position = (363.6, 328.1) = 15 2 0.46 -42 7 6.0
  Extent = 29.5 (27.3-34.1)", rotation angle = 0
  Source counts = 1013.8 +/- 43.6
  Background counts = 884.4
  Rate = 0.2 +/- 0.01
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 2053.790000, observed total counts = 2033.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 53 = 4.135462 pixels
[Thu May 30 09:12:25 2013] Warning, changing simple spatial fit ID from 5 to 20
[Thu May 30 09:12:25 2013] 1925.354000 total counts/ 1350.250000 bgd. counts: snr = 15.650899
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 4.135462 pixels
  Position = (366.3, 331.3) = 15 1 59.44 -42 6 52.1
  Extent = 20.0 (17.1-22.9)", rotation angle = 0
  Source counts = 575.1 +/- 43.9
  Background counts = 1350.2
  Rate = 0.1 +/- 0.01
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 1001.590000, observed total counts = 1001.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 53 = 1.965071 pixels
[Thu May 30 09:12:25 2013] Warning, changing simple spatial fit ID from 20 to 48
[Thu May 30 09:12:25 2013] 936.706000 total counts/ 754.093000 bgd. counts: snr = 6.649963
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 1.965071 pixels
  Position = (367.4, 329.6) = 15 1 59.01 -42 6 59.2
  Extent = 18.2 (18.2-18.2)", rotation angle = 0
  Source counts = 182.6 +/- 30.6
  Background counts = 754.1
  Rate = 0.04 +/- 0.007
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:31 2013] XMMSAS src. selection expression = ellipse(31911.950000, 28629.018000, 1091.886031, 1091.886031, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src53_src.reg
[Thu May 30 16:23:31 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (305, 267) - (430, 392)
[Thu May 30 16:23:31 2013] XMMSAS bgd. selection expression = annulus(31911.950000, 28629.018000, 1819.810052, 3639.620105, X, Y) && !ellipse(28959.402000, 26798.090000, 1276.712037, 1276.712037, 0.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(32255.526000, 29093.078000, 1532.368044, 1532.368044, 0.000000, X, Y) && !ellipse(32408.496000, 29281.260000, 1486.416043, 1486.416043, 0.000000, X, Y) && !ellipse(27352.472000, 26238.041400, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(33050.127229, 29862.267512, 1276.712037, 825.924578, 320.387964, X, Y) && !ellipse(29311.689600, 27031.491000, 1276.712037, 738.860821, 344.225000, X, Y) && !ellipse(29845.154000, 27453.336000, 1330.448038, 1330.448038, 0.000000, X, Y) && !ellipse(28791.014000, 27849.513600, 1274.480037, 1274.480037, 0.000000, X, Y) && !ellipse(33775.771520, 30601.344000, 661.535219, 661.535219, 0.000000, X, Y) && !ellipse(34778.031296, 32564.975644, 1284.280037, 649.915595, 98.096251, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(34267.534000, 31462.970000, 2093.960060, 2093.960060, 0.000000, X, Y) && !ellipse(33428.828125, 31289.134705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28016.144000, 27811.530400, 1193.608034, 1193.608034, 0.000000, X, Y) && !ellipse(32949.253000, 31436.986000, 1607.128046, 1607.128046, 0.000000, X, Y) && !ellipse(35012.708000, 32674.498000, 3497.248101, 3497.248101, 0.000000, X, Y) && !ellipse(30634.418000, 29829.692000, 1455.976042, 1455.976042, 0.000000, X, Y) && !ellipse(33806.560000, 32860.158200, 1715.272049, 1715.272049, 0.000000, X, Y) && !ellipse(28792.461975, 28479.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.847870, 29692.976227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31842.218000, 30565.682000, 1385.920040, 1385.920040, 0.000000, X, Y) && !ellipse(33406.896000, 33101.256000, 1741.376050, 1741.376050, 0.000000, X, Y) && !ellipse(31397.329803, 29268.344116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.662537, 28484.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.853699, 28474.628418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32855.328522, 31916.775665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28105.752000, 29004.704000, 1244.344036, 1244.344036, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src53.gif
[Thu May 30 16:34:41 2013] Mean detx,y = (-5322.89, -798.59) 
[Thu May 30 16:34:45 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:35:12 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:35:13 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Thu May 30 16:35:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Thu May 30 20:50:53 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:53 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 1573.00
[Thu May 30 20:50:53 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src53_bgd.pi.gz = 638.00
[Thu May 30 20:50:53 2013] Got source and background scale factors 3748800.000000, 10883624.000000
[Thu May 30 20:50:53 2013] User source parameters:
  Position = (367.4, 329.6) = 15 1 59.01 -42 6 59.2
  Extent = 18.2 (18.2-18.2)", rotation angle = 0
  Source aperture counts = 1353.2 +/- 40.7
  Background aperture counts = 219.8
  Rate = 0.3 +/- 0.01

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0432, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src53.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 5.2e-13
[Thu May 30 20:51:40 2013] Flag c found in src. 53 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete