[Thu May 30 09:07:55 2013] Detection parameters:
  Position = (344.7, 341.9) = 15 2 7.88 -42 6 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 75.1 +/- 14.9
  Background counts = 46.1
  Rate = 0.02 +/- 0.004

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 4.60'
[Thu May 30 09:09:09 2013] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 8.73"
[Thu May 30 09:09:09 2013] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.597
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 8.73"
[Thu May 30 09:09:12 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src51.ximg exists
[Thu May 30 09:09:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src51.csv
[Thu May 30 09:09:12 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu May 30 09:09:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src51.csv
[Thu May 30 09:09:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu May 30 09:09:16 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Thu May 30 09:10:32 2013] Warning, spatial fit 51 centroid is now closest to src. 47
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 45
[Thu May 30 09:11:12 2013] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 8.73"
[Thu May 30 09:11:12 2013] source mask rpix=2.0, npix_max = 25, mask sum = 15, frac = 0.597
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 8.73"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src40.ximg exists
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src40_1.ximg exists
[Thu May 30 09:11:14 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src40 appears to have run properly
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Thu May 30 09:11:19 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src40 appears to have run properly
[Thu May 30 09:12:25 2013] Source 39 is offset by 4.906182 and 6.226899 pixels which is larger than
2 X fitted extent = 1.831149 x 1.831149, not incorporating fit results
[Thu May 30 09:12:25 2013] Source 39 is offset by -5.318875 and 7.881842 pixels which is larger than
2 X fitted extent = 1.183035 x 6.265334, not incorporating fit results
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:32 2013] XMMSAS src. selection expression = ellipse(29938.847870, 29692.976227, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 16:23:32 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src39_src.reg
[Thu May 30 16:23:32 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (307, 304) - (382, 379)
[Thu May 30 16:23:32 2013] XMMSAS bgd. selection expression = annulus(29938.847870, 29692.976227, 1087.500000, 2175.000000, X, Y) && !ellipse(28959.402000, 26798.090000, 1276.712037, 1276.712037, 0.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(32255.526000, 29093.078000, 1532.368044, 1532.368044, 0.000000, X, Y) && !ellipse(32408.496000, 29281.260000, 1486.416043, 1486.416043, 0.000000, X, Y) && !ellipse(33050.127229, 29862.267512, 1276.712037, 825.924578, 320.387964, X, Y) && !ellipse(29311.689600, 27031.491000, 1276.712037, 738.860821, 344.225000, X, Y) && !ellipse(29845.154000, 27453.336000, 1330.448038, 1330.448038, 0.000000, X, Y) && !ellipse(28791.014000, 27849.513600, 1274.480037, 1274.480037, 0.000000, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(27192.660797, 26736.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31911.950000, 28629.018000, 1455.848042, 1455.848042, 0.000000, X, Y) && !ellipse(28016.144000, 27811.530400, 1193.608034, 1193.608034, 0.000000, X, Y) && !ellipse(32949.253000, 31436.986000, 1607.128046, 1607.128046, 0.000000, X, Y) && !ellipse(35012.708000, 32674.498000, 3497.248101, 3497.248101, 0.000000, X, Y) && !ellipse(30634.418000, 29829.692000, 1455.976042, 1455.976042, 0.000000, X, Y) && !ellipse(33806.560000, 32860.158200, 1715.272049, 1715.272049, 0.000000, X, Y) && !ellipse(28792.461975, 28479.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31842.218000, 30565.682000, 1385.920040, 1385.920040, 0.000000, X, Y) && !ellipse(33406.896000, 33101.256000, 1741.376050, 1741.376050, 0.000000, X, Y) && !ellipse(31397.329803, 29268.344116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.662537, 28484.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.853699, 28474.628418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32855.328522, 31916.775665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28105.752000, 29004.704000, 1244.344036, 1244.344036, 0.000000, X, Y)
[Thu May 30 16:23:32 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src39.gif
[Thu May 30 16:52:32 2013] Mean detx,y = (-3860.10, 600.93) 
[Thu May 30 16:52:36 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:52:46 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:52:47 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu May 30 16:52:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu May 30 20:06:41 2013] Not generating rmf since there are only 75 counts
[Thu May 30 20:06:41 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:58 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:58 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 536.00
[Thu May 30 20:50:58 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src39_bgd.pi.gz = 324.00
[Thu May 30 20:50:58 2013] Got source and background scale factors 1250332.000000, 1133676.000000
[Thu May 30 20:50:58 2013] User source parameters:
  Position = (344.7, 341.9) = 15 2 7.88 -42 6 4.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 178.7 +/- 24.2
  Background aperture counts = 357.3
  Rate = 0.04 +/- 0.006

[Thu May 30 20:50:58 2013] Updating counts from extracted products
[Thu May 30 20:50:58 2013] Set source signif. to 178.66/18.90 = 9.45
[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0423, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src39.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 5.7e-13
[Thu May 30 20:51:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete