[Thu May 30 09:07:55 2013] Detection parameters:
  Position = (373.3, 349.9) = 15 1 56.70 -42 5 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.7 +/- 13.1
  Background counts = 36.3
  Rate = 0.02 +/- 0.004

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 6.59'
[Thu May 30 09:09:09 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Thu May 30 09:09:09 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.769
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 9.72"
[Thu May 30 09:09:12 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src52.ximg exists
[Thu May 30 09:09:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src52.csv
[Thu May 30 09:09:12 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src52_1.ximg exists
[Thu May 30 09:09:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src52.csv
[Thu May 30 09:09:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Thu May 30 09:09:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src52.csv
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Thu May 30 09:09:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src52.csv
[Thu May 30 09:09:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:10:31 2013] Source 36 is offset by 0.664428 and 7.692686 pixels which is larger than
2 X fitted extent = 1.182041 x 1.182041, not incorporating fit results
[Thu May 30 09:10:32 2013] Warning, spatial fit 52 centroid is now closest to src. 37
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 37
[Thu May 30 09:11:12 2013] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 9.72"
[Thu May 30 09:11:12 2013] source mask rpix=2.2, npix_max = 29, mask sum = 23, frac = 0.769
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 9.72"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src41.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src41.csv
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src41_1.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src41.csv
[Thu May 30 09:11:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Thu May 30 09:11:19 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 839.887000, observed total counts = 833.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 36 = 3.573031 pixels
[Thu May 30 09:12:25 2013] Warning, changing simple spatial fit ID from 41 to 30
[Thu May 30 09:12:25 2013] 676.450000 total counts/ 415.312000 bgd. counts: snr = 12.813944
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 3.573031 pixels
  Position = (369.8, 350.5) = 15 1 58.07 -42 5 28.4
  Extent = 17.1 (13.1-19.1)", rotation angle = 0
  Source counts = 261.1 +/- 26.0
  Background counts = 415.3
  Rate = 0.06 +/- 0.006
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 864.184000, observed total counts = 789.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 36 = 3.516995 pixels
[Thu May 30 09:12:25 2013] Warning, changing simple spatial fit ID from 30 to 41
[Thu May 30 09:12:25 2013] 646.443000 total counts/ 373.497000 bgd. counts: snr = 14.123202
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 3.516995 pixels
  Position = (366.6, 351.9) = 15 1 59.34 -42 5 22.4
  Extent = 17.3 (13.1-19.4)", rotation angle = 0
  Source counts = 272.9 +/- 25.4
  Background counts = 373.5
  Rate = 0.06 +/- 0.006
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:32 2013] XMMSAS src. selection expression = ellipse(31842.218000, 30565.682000, 1039.440030, 1039.440030, 0.000000, X, Y)
[Thu May 30 16:23:32 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src36_src.reg
[Thu May 30 16:23:32 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (307, 292) - (426, 412)
[Thu May 30 16:23:32 2013] XMMSAS bgd. selection expression = annulus(31842.218000, 30565.682000, 1732.400050, 3464.800100, X, Y) && !ellipse(28959.402000, 26798.090000, 1276.712037, 1276.712037, 0.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(32255.526000, 29093.078000, 1532.368044, 1532.368044, 0.000000, X, Y) && !ellipse(32408.496000, 29281.260000, 1486.416043, 1486.416043, 0.000000, X, Y) && !ellipse(27352.472000, 26238.041400, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(33050.127229, 29862.267512, 1276.712037, 825.924578, 320.387964, X, Y) && !ellipse(29311.689600, 27031.491000, 1276.712037, 738.860821, 344.225000, X, Y) && !ellipse(29845.154000, 27453.336000, 1330.448038, 1330.448038, 0.000000, X, Y) && !ellipse(28791.014000, 27849.513600, 1274.480037, 1274.480037, 0.000000, X, Y) && !ellipse(33775.771520, 30601.344000, 661.535219, 661.535219, 0.000000, X, Y) && !ellipse(34778.031296, 32564.975644, 1284.280037, 649.915595, 98.096251, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(34267.534000, 31462.970000, 2093.960060, 2093.960060, 0.000000, X, Y) && !ellipse(31911.950000, 28629.018000, 1455.848042, 1455.848042, 0.000000, X, Y) && !ellipse(33428.828125, 31289.134705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28016.144000, 27811.530400, 1193.608034, 1193.608034, 0.000000, X, Y) && !ellipse(32949.253000, 31436.986000, 1607.128046, 1607.128046, 0.000000, X, Y) && !ellipse(35012.708000, 32674.498000, 3497.248101, 3497.248101, 0.000000, X, Y) && !ellipse(30634.418000, 29829.692000, 1455.976042, 1455.976042, 0.000000, X, Y) && !ellipse(33806.560000, 32860.158200, 1715.272049, 1715.272049, 0.000000, X, Y) && !ellipse(28792.461975, 28479.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.847870, 29692.976227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33406.896000, 33101.256000, 1741.376050, 1741.376050, 0.000000, X, Y) && !ellipse(31397.329803, 29268.344116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.662537, 28484.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.853699, 28474.628418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32855.328522, 31916.775665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28105.752000, 29004.704000, 1244.344036, 1244.344036, 0.000000, X, Y)
[Thu May 30 16:23:32 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src36.gif
[Thu May 30 16:52:52 2013] Mean detx,y = (-5846.73, 774.38) 
[Thu May 30 16:52:54 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:53:19 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:53:19 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu May 30 16:53:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu May 30 20:50:58 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:58 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 1383.00
[Thu May 30 20:50:58 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src36_bgd.pi.gz = 1442.00
[Thu May 30 20:50:58 2013] Got source and background scale factors 3212079.000000, 6888388.000000
[Thu May 30 20:50:58 2013] User source parameters:
  Position = (366.6, 351.9) = 15 1 59.34 -42 5 22.4
  Extent = 17.3 (13.1-19.4)", rotation angle = 0
  Source aperture counts = 710.6 +/- 38.2
  Background aperture counts = 672.4
  Rate = 0.2 +/- 0.009

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0646, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src36.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 8.3e-13
[Thu May 30 20:51:40 2013] Flag b found in src. 36 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] Flag c found in src. 36 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete