[Thu May 30 09:07:55 2013] Detection parameters:
  Position = (389.1, 352.5) = 15 1 50.52 -42 5 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.1 +/- 15.5
  Background counts = 26.6
  Rate = 0.04 +/- 0.005

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 7.65'
[Thu May 30 09:09:09 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 10.26"
[Thu May 30 09:09:09 2013] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.888
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 10.26"
[Thu May 30 09:09:10 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src14.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src14.csv
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src14_1.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src14.csv
[Thu May 30 09:09:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Thu May 30 09:09:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu May 30 09:09:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Thu May 30 09:09:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src14.csv
[Thu May 30 09:09:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:10:31 2013] Warning, spatial fit 14 centroid is now closest to src. 30
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 30
[Thu May 30 09:10:32 2013] Source is confused with source 33
[Thu May 30 09:11:12 2013] Using EEF radius (= 10.26 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 10.26"
[Thu May 30 09:11:12 2013] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.888
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.26"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src13.ximg exists
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu May 30 09:11:14 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src13 appears to have run properly
[Thu May 30 09:11:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu May 30 09:11:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu May 30 09:11:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu May 30 09:11:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu May 30 09:11:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 753.823000, observed total counts = 732.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 35 = 0.374820 pixels
[Thu May 30 09:12:25 2013] 688.983100 total counts/ 626.317000 bgd. counts: snr = 2.504007
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.374820 pixels
  Position = (388.8, 352.3) = 15 1 50.65 -42 5 20.5
  Extent = 8.3" x 8.3", rotation angle = 0
  Source counts = 62.7 +/- 26.2
  Background counts = 626.3
  Rate = 0.01 +/- 0.006
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:30 2013] XMMSAS src. selection expression = ellipse(33775.771520, 30601.344000, 496.151414, 496.151414, 0.000000, X, Y)
[Thu May 30 16:23:30 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src35_src.reg
[Thu May 30 16:23:30 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (360, 324) - (417, 381)
[Thu May 30 16:23:30 2013] XMMSAS bgd. selection expression = annulus(33775.771520, 30601.344000, 826.919024, 1653.838048, X, Y) && !ellipse(32255.526000, 29093.078000, 1532.368044, 1532.368044, 0.000000, X, Y) && !ellipse(32408.496000, 29281.260000, 1486.416043, 1486.416043, 0.000000, X, Y) && !ellipse(33050.127229, 29862.267512, 1276.712037, 825.924578, 320.387964, X, Y) && !ellipse(34778.031296, 32564.975644, 1284.280037, 649.915595, 98.096251, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(34267.534000, 31462.970000, 2093.960060, 2093.960060, 0.000000, X, Y) && !ellipse(31911.950000, 28629.018000, 1455.848042, 1455.848042, 0.000000, X, Y) && !ellipse(33428.828125, 31289.134705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32949.253000, 31436.986000, 1607.128046, 1607.128046, 0.000000, X, Y) && !ellipse(35012.708000, 32674.498000, 3497.248101, 3497.248101, 0.000000, X, Y) && !ellipse(33806.560000, 32860.158200, 1715.272049, 1715.272049, 0.000000, X, Y) && !ellipse(31842.218000, 30565.682000, 1385.920040, 1385.920040, 0.000000, X, Y) && !ellipse(33406.896000, 33101.256000, 1741.376050, 1741.376050, 0.000000, X, Y) && !ellipse(31397.329803, 29268.344116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32855.328522, 31916.775665, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:30 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src35.gif
[Thu May 30 16:29:36 2013] Mean detx,y = (-7730.94, 204.35) 
[Thu May 30 16:29:38 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:30:01 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:30:01 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu May 30 16:30:01 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu May 30 18:17:57 2013] Not generating rmf since there are only 62 counts
[Thu May 30 18:17:57 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:52 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:52 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 311.00
[Thu May 30 20:50:52 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src35_bgd.pi.gz = 6.00
[Thu May 30 20:50:52 2013] Got source and background scale factors 642792.000000, 102400.000000
[Thu May 30 20:50:52 2013] User source parameters:
  Position = (388.8, 352.3) = 15 1 50.65 -42 5 20.5
  Extent = 8.3" x 8.3", rotation angle = 0
  Source aperture counts = 273.3 +/- 18.7
  Background aperture counts = 37.7
  Rate = 0.06 +/- 0.004

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0148, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src35.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 2.4e-13
[Thu May 30 20:51:40 2013] Flag c found in src. 35 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] Source 35 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete