[Thu May 30 09:07:55 2013] Detection parameters:
  Position = (378.2, 358.3) = 15 1 54.78 -42 4 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.1 +/- 15.4
  Background counts = 36.8
  Rate = 0.03 +/- 0.004

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 7.23'
[Thu May 30 09:09:09 2013] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 10.04"
[Thu May 30 09:09:09 2013] source mask rpix=2.3, npix_max = 31, mask sum = 31, frac = 0.982
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 10.04"
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src30.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src30.csv
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src30.csv
[Thu May 30 09:09:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu May 30 09:09:15 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Thu May 30 09:10:31 2013] Spatial fit model total counts = 777.691000, observed total counts = 709.000000
[Thu May 30 09:10:31 2013] Offset between fit and detection position for source 33 = 3.752282 pixels
[Thu May 30 09:10:31 2013] 658.429000 total counts/ 287.841000 bgd. counts: snr = 21.843138
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 3.752282 pixels
  Position = (379.3, 361.9) = 15 1 54.37 -42 4 38.8
  Extent = 20.1 (20.0-40.2)", rotation angle = 0
  Source counts = 370.6 +/- 25.7
  Background counts = 287.8
  Rate = 0.09 +/- 0.006
[Thu May 30 09:10:32 2013] Source 33 is offset by 3.168533 and -1.983609 pixels which is larger than
2 X fitted extent = 1.178322 x 1.178322, not incorporating fit results
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 35
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 20.09"
[Thu May 30 09:11:12 2013] source mask rpix=4.6, npix_max = 104, mask sum = 97, frac = 0.926
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 20.09"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src27.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src27.csv
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src27.csv
[Thu May 30 09:11:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu May 30 09:11:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu May 30 09:11:18 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu May 30 09:12:25 2013] Warning, spatial fit 27 centroid is now closest to src. 37
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:31 2013] XMMSAS src. selection expression = ellipse(32949.253000, 31436.986000, 1205.346035, 1205.346035, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src33_src.reg
[Thu May 30 16:23:31 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (310, 293) - (449, 431)
[Thu May 30 16:23:31 2013] XMMSAS bgd. selection expression = annulus(32949.253000, 31436.986000, 2008.910058, 4017.820116, X, Y) && !ellipse(28959.402000, 26798.090000, 1276.712037, 1276.712037, 0.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(32255.526000, 29093.078000, 1532.368044, 1532.368044, 0.000000, X, Y) && !ellipse(32408.496000, 29281.260000, 1486.416043, 1486.416043, 0.000000, X, Y) && !ellipse(33050.127229, 29862.267512, 1276.712037, 825.924578, 320.387964, X, Y) && !ellipse(29311.689600, 27031.491000, 1276.712037, 738.860821, 344.225000, X, Y) && !ellipse(29845.154000, 27453.336000, 1330.448038, 1330.448038, 0.000000, X, Y) && !ellipse(28791.014000, 27849.513600, 1274.480037, 1274.480037, 0.000000, X, Y) && !ellipse(33775.771520, 30601.344000, 661.535219, 661.535219, 0.000000, X, Y) && !ellipse(34778.031296, 32564.975644, 1284.280037, 649.915595, 98.096251, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(34267.534000, 31462.970000, 2093.960060, 2093.960060, 0.000000, X, Y) && !ellipse(31911.950000, 28629.018000, 1455.848042, 1455.848042, 0.000000, X, Y) && !ellipse(33428.828125, 31289.134705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28016.144000, 27811.530400, 1193.608034, 1193.608034, 0.000000, X, Y) && !ellipse(35012.708000, 32674.498000, 3497.248101, 3497.248101, 0.000000, X, Y) && !ellipse(30634.418000, 29829.692000, 1455.976042, 1455.976042, 0.000000, X, Y) && !ellipse(33806.560000, 32860.158200, 1715.272049, 1715.272049, 0.000000, X, Y) && !ellipse(28792.461975, 28479.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.847870, 29692.976227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31842.218000, 30565.682000, 1385.920040, 1385.920040, 0.000000, X, Y) && !ellipse(37057.234000, 36113.996000, 2070.496060, 519.332815, 304.762000, X, Y) && !ellipse(33406.896000, 33101.256000, 1741.376050, 1741.376050, 0.000000, X, Y) && !ellipse(31397.329803, 29268.344116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32855.328522, 31916.775665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28105.752000, 29004.704000, 1244.344036, 1244.344036, 0.000000, X, Y) && !ellipse(36400.222748, 35468.766785, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src33.gif
[Thu May 30 16:37:19 2013] Mean detx,y = (-7309.57, 1224.52) 
[Thu May 30 16:37:22 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:37:58 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:37:59 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Thu May 30 16:37:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Thu May 30 20:50:55 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:55 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 1696.00
[Thu May 30 20:50:55 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src33_bgd.pi.gz = 1819.00
[Thu May 30 20:50:55 2013] Got source and background scale factors 4060343.000000, 10681604.000000
[Thu May 30 20:50:55 2013] User source parameters:
  Position = (379.3, 361.9) = 15 1 54.37 -42 4 38.8
  Extent = 20.1 (20.0-40.2)", rotation angle = 0
  Source aperture counts = 1004.6 +/- 42.2
  Background aperture counts = 691.4
  Rate = 0.2 +/- 0.01

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0877, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src33.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 1.2e-12
[Thu May 30 20:51:40 2013] Flag b found in src. 33 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] Flag c found in src. 33 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete