[Thu May 30 09:07:54 2013] Detection parameters:
  Position = (245.0, 276.1) = 15 2 46.88 -42 10 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.5 +/- 11.6
  Background counts = 14.8
  Rate = 0.02 +/- 0.003

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 4.20'
[Thu May 30 09:09:09 2013] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 8.53"
[Thu May 30 09:09:09 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.826
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 71 for pass 0, mean size = 8.53"
[Thu May 30 09:09:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src71.ximg exists
[Thu May 30 09:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src71.csv
[Thu May 30 09:09:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src71_1.ximg exists
[Thu May 30 09:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src71.csv
[Thu May 30 09:09:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Thu May 30 09:09:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src71.csv
[Thu May 30 09:09:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Thu May 30 09:09:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src71.csv
[Thu May 30 09:09:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:10:32 2013] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 10.518669 pixels away
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 100
[Thu May 30 09:11:12 2013] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 8.53"
[Thu May 30 09:11:12 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.826
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 8.53"
[Thu May 30 09:11:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src56.ximg exists
[Thu May 30 09:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src56.csv
[Thu May 30 09:11:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src56_1.ximg exists
[Thu May 30 09:11:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src56.csv
[Thu May 30 09:11:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Thu May 30 09:11:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Thu May 30 09:11:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src56.csv
[Thu May 30 09:11:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:12:25 2013] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 10.452429 pixels away
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:33 2013] XMMSAS src. selection expression = ellipse(21264.106491, 23975.614899, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 16:23:33 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src31_src.reg
[Thu May 30 16:23:33 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (207, 239) - (282, 314)
[Thu May 30 16:23:33 2013] XMMSAS bgd. selection expression = annulus(21264.106491, 23975.614899, 1087.500000, 2175.000000, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(22989.148600, 24338.314200, 669.831219, 669.831219, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(21002.195816, 24415.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20941.458600, 25413.954200, 871.944025, 871.944025, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18010.581400, 27015.292300, 1616.608047, 1616.608047, 0.000000, X, Y) && !ellipse(22740.896179, 25856.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.458817, 25519.724182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.391785, 25249.115631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21819.651459, 26160.738525, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:33 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src31.gif
[Thu May 30 16:58:42 2013] Mean detx,y = (6092.60, -1812.92) 
[Thu May 30 16:58:45 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:59:23 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:59:23 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu May 30 16:59:23 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu May 30 20:38:31 2013] Not generating rmf since there are only 58 counts
[Thu May 30 20:38:31 2013] rmf not generated due to insufficient counts
[Thu May 30 20:51:01 2013] Updating aperture counts using extracted products
[Thu May 30 20:51:01 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 278.00
[Thu May 30 20:51:01 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src31_bgd.pi.gz = 482.00
[Thu May 30 20:51:01 2013] Got source and background scale factors 1150948.000000, 6442218.000000
[Thu May 30 20:51:01 2013] User source parameters:
  Position = (245.0, 276.1) = 15 2 46.88 -42 10 54.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 191.9 +/- 17.7
  Background aperture counts = 86.1
  Rate = 0.05 +/- 0.004

[Thu May 30 20:51:01 2013] Updating counts from extracted products
[Thu May 30 20:51:01 2013] Set source signif. to 191.89/9.28 = 20.68
[Thu May 30 20:51:05 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:05 2013] Using photon index=1.80, rate=0.0454, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src31.arf
[Thu May 30 20:51:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:05 2013] Updating source flux to 7.3e-13
[Thu May 30 20:51:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete