[Thu May 30 09:07:54 2013] Detection parameters:
  Position = (398.7, 365.1) = 15 1 46.78 -42 4 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.2 +/- 15.4
  Background counts = 30.5
  Rate = 0.03 +/- 0.005

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 8.73'
[Thu May 30 09:09:09 2013] Using EEF radius (= 10.79 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 10.79"
[Thu May 30 09:09:09 2013] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.928
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 10.79"
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src19.ximg exists
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu May 30 09:09:11 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src19 appears to have run properly
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu May 30 09:09:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu May 30 09:09:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu May 30 09:09:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:10:31 2013] Source 30 is offset by 0.278237 and 2.690865 pixels which is larger than
2 X fitted extent = 1.178745 x 1.178745, not incorporating fit results
[Thu May 30 09:10:31 2013] Warning, spatial fit 19 centroid is now closest to src. 25
[Thu May 30 09:10:32 2013] Spatial fit model total counts = 796.893000, observed total counts = 794.000000
[Thu May 30 09:10:32 2013] Offset between fit and detection position for source 30 = 3.628281 pixels
[Thu May 30 09:10:32 2013] Warning, changing simple spatial fit ID from 19 to 37
[Thu May 30 09:10:32 2013] 740.053000 total counts/ 372.263000 bgd. counts: snr = 19.062286
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 3.628281 pixels
  Position = (395.2, 366.2) = 15 1 48.15 -42 4 20.1
  Extent = 21.9 (21.8-43.7)", rotation angle = 0
  Source counts = 367.8 +/- 27.2
  Background counts = 372.3
  Rate = 0.09 +/- 0.006
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 35
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 21.86"
[Thu May 30 09:11:12 2013] source mask rpix=5.0, npix_max = 122, mask sum = 114, frac = 0.934
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 21.86"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src18.ximg exists
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src18_1.ximg exists
[Thu May 30 09:11:14 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src18 appears to have run properly
[Thu May 30 09:11:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Thu May 30 09:11:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Thu May 30 09:11:17 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Thu May 30 09:12:25 2013] Warning, spatial fit 18 centroid is now closest to src. 25
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 1474.630000, observed total counts = 1368.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 30 = 4.030624 pixels
[Thu May 30 09:12:25 2013] Warning, changing simple spatial fit ID from 18 to 31
[Thu May 30 09:12:25 2013] 1297.048000 total counts/ 959.738000 bgd. counts: snr = 10.888119
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 4.030624 pixels
  Position = (394.4, 362.2) = 15 1 48.45 -42 4 37.3
  Extent = 26.2 (20.1-29.2)", rotation angle = 0
  Source counts = 337.3 +/- 36.0
  Background counts = 959.7
  Rate = 0.08 +/- 0.009
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:30 2013] XMMSAS src. selection expression = ellipse(34267.534000, 31462.970000, 1570.470045, 1570.470045, 0.000000, X, Y)
[Thu May 30 16:23:30 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src30_src.reg
[Thu May 30 16:23:30 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (304, 272) - (485, 452)
[Thu May 30 16:23:30 2013] XMMSAS bgd. selection expression = annulus(34267.534000, 31462.970000, 2617.450075, 5234.900151, X, Y) && !ellipse(28959.402000, 26798.090000, 1276.712037, 1276.712037, 0.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(32255.526000, 29093.078000, 1532.368044, 1532.368044, 0.000000, X, Y) && !ellipse(32408.496000, 29281.260000, 1486.416043, 1486.416043, 0.000000, X, Y) && !ellipse(33050.127229, 29862.267512, 1276.712037, 825.924578, 320.387964, X, Y) && !ellipse(29311.689600, 27031.491000, 1276.712037, 738.860821, 344.225000, X, Y) && !ellipse(29845.154000, 27453.336000, 1330.448038, 1330.448038, 0.000000, X, Y) && !ellipse(28791.014000, 27849.513600, 1274.480037, 1274.480037, 0.000000, X, Y) && !ellipse(33775.771520, 30601.344000, 661.535219, 661.535219, 0.000000, X, Y) && !ellipse(34778.031296, 32564.975644, 1284.280037, 649.915595, 98.096251, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(31911.950000, 28629.018000, 1455.848042, 1455.848042, 0.000000, X, Y) && !ellipse(33428.828125, 31289.134705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28016.144000, 27811.530400, 1193.608034, 1193.608034, 0.000000, X, Y) && !ellipse(32949.253000, 31436.986000, 1607.128046, 1607.128046, 0.000000, X, Y) && !ellipse(35012.708000, 32674.498000, 3497.248101, 3497.248101, 0.000000, X, Y) && !ellipse(30634.418000, 29829.692000, 1455.976042, 1455.976042, 0.000000, X, Y) && !ellipse(33806.560000, 32860.158200, 1715.272049, 1715.272049, 0.000000, X, Y) && !ellipse(28792.461975, 28479.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.847870, 29692.976227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31842.218000, 30565.682000, 1385.920040, 1385.920040, 0.000000, X, Y) && !ellipse(37057.234000, 36113.996000, 2070.496060, 519.332815, 304.762000, X, Y) && !ellipse(33406.896000, 33101.256000, 1741.376050, 1741.376050, 0.000000, X, Y) && !ellipse(31397.329803, 29268.344116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32855.328522, 31916.775665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28105.752000, 29004.704000, 1244.344036, 1244.344036, 0.000000, X, Y) && !ellipse(36400.222748, 35468.766785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38149.908000, 37803.110000, 2129.632061, 2129.632061, 0.000000, X, Y)
[Thu May 30 16:23:30 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src30.gif
[Thu May 30 16:33:23 2013] Mean detx,y = (-8336.14, 1098.42) 
[Thu May 30 16:33:25 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:34:09 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:34:09 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu May 30 16:34:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu May 30 20:50:53 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:53 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 2519.00
[Thu May 30 20:50:53 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src30_bgd.pi.gz = 2994.00
[Thu May 30 20:50:53 2013] Got source and background scale factors 7166576.000000, 31193108.000000
[Thu May 30 20:50:53 2013] User source parameters:
  Position = (394.4, 362.2) = 15 1 48.45 -42 4 37.3
  Extent = 26.2 (20.1-29.2)", rotation angle = 0
  Source aperture counts = 1831.1 +/- 51.2
  Background aperture counts = 687.9
  Rate = 0.4 +/- 0.01

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0799, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src30.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 1.2e-12
[Thu May 30 20:51:40 2013] Flag b found in src. 30 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] Flag c found in src. 30 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete