[Thu May 30 09:07:54 2013] Detection parameters:
  Position = (399.9, 370.0) = 15 1 46.32 -42 4 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.3 +/- 14.9
  Background counts = 31.9
  Rate = 0.03 +/- 0.005

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 9.00'
[Thu May 30 09:09:09 2013] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 10.93"
[Thu May 30 09:09:09 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.992
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 10.93"
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src37.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src37.csv
[Thu May 30 09:09:11 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu May 30 09:09:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src37.csv
[Thu May 30 09:09:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu May 30 09:09:15 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu May 30 09:09:15 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu May 30 09:10:31 2013] Spatial fit model total counts = 716.373000, observed total counts = 677.000000
[Thu May 30 09:10:31 2013] Offset between fit and detection position for source 25 = 3.490162 pixels
[Thu May 30 09:10:31 2013] Warning, changing simple spatial fit ID from 37 to 19
[Thu May 30 09:10:31 2013] 839.933000 total counts/ 707.751000 bgd. counts: snr = 4.968578
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.490162 pixels
  Position = (402.6, 367.7) = 15 1 45.29 -42 4 13.5
  Extent = 14.6" x 14.6", rotation angle = 0
  Source counts = 132.2 +/- 29.0
  Background counts = 707.8
  Rate = 0.03 +/- 0.007
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 23
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 14.60"
[Thu May 30 09:11:12 2013] source mask rpix=3.4, npix_max = 59, mask sum = 55, frac = 0.924
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 14.60"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src31.ximg exists
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu May 30 09:11:14 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src31 appears to have run properly
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu May 30 09:11:19 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 2502.770000, observed total counts = 2332.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 25 = 8.471845 pixels
[Thu May 30 09:12:25 2013] Warning, changing simple spatial fit ID from 31 to 18
[Thu May 30 09:12:25 2013] 2390.273000 total counts/ 963.333000 bgd. counts: snr = 45.974551
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 8.471845 pixels
  Position = (403.0, 376.1) = 15 1 45.12 -42 3 36.7
  Extent = 43.7 (43.4-87.4)", rotation angle = 0
  Source counts = 1426.9 +/- 48.9
  Background counts = 963.3
  Rate = 0.3 +/- 0.01
[Thu May 30 09:12:25 2013] Source 25 is offset by -3.046460 and -1.989586 pixels which is larger than
2 X fitted extent = 0.898823 x 0.898823, not incorporating fit results
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:31 2013] Counts = 1426.940000, rescaling region sizes by 2.000000
[Thu May 30 16:23:31 2013] XMMSAS src. selection expression = ellipse(35012.708000, 32674.498000, 5245.872151, 5245.872151, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src25_src.reg
[Thu May 30 16:23:31 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (102, 75) - (595, 595)
[Thu May 30 16:23:31 2013] XMMSAS bgd. selection expression = annulus(35012.708000, 32674.498000, 17486.240503, 34972.481006, X, Y) && !ellipse(28959.402000, 26798.090000, 1276.712037, 1276.712037, 0.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(32255.526000, 29093.078000, 1532.368044, 1532.368044, 0.000000, X, Y) && !ellipse(32408.496000, 29281.260000, 1486.416043, 1486.416043, 0.000000, X, Y) && !ellipse(27352.472000, 26238.041400, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(33050.127229, 29862.267512, 1276.712037, 825.924578, 320.387964, X, Y) && !ellipse(29311.689600, 27031.491000, 1276.712037, 738.860821, 344.225000, X, Y) && !ellipse(26426.092000, 25667.978000, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(29845.154000, 27453.336000, 1330.448038, 1330.448038, 0.000000, X, Y) && !ellipse(25904.662800, 25453.947400, 1644.976047, 775.148022, 332.946000, X, Y) && !ellipse(28791.014000, 27849.513600, 1274.480037, 1274.480037, 0.000000, X, Y) && !ellipse(33775.771520, 30601.344000, 661.535219, 661.535219, 0.000000, X, Y) && !ellipse(34778.031296, 32564.975644, 1284.280037, 649.915595, 98.096251, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(27192.660797, 26736.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34267.534000, 31462.970000, 2093.960060, 2093.960060, 0.000000, X, Y) && !ellipse(25697.972229, 26239.396423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31911.950000, 28629.018000, 1455.848042, 1455.848042, 0.000000, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(26106.278000, 26614.812000, 1108.440032, 1108.440032, 0.000000, X, Y) && !ellipse(25223.856000, 25149.024000, 1577.992045, 1577.992045, 0.000000, X, Y) && !ellipse(33428.828125, 31289.134705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22989.148600, 24338.314200, 669.831219, 669.831219, 0.000000, X, Y) && !ellipse(28016.144000, 27811.530400, 1193.608034, 1193.608034, 0.000000, X, Y) && !ellipse(32949.253000, 31436.986000, 1607.128046, 1607.128046, 0.000000, X, Y) && !ellipse(26678.235596, 26839.417114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(24573.676178, 25520.942841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21002.195816, 24415.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30634.418000, 29829.692000, 1455.976042, 1455.976042, 0.000000, X, Y) && !ellipse(33806.560000, 32860.158200, 1715.272049, 1715.272049, 0.000000, X, Y) && !ellipse(28792.461975, 28479.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20941.458600, 25413.954200, 871.944025, 871.944025, 0.000000, X, Y) && !ellipse(29938.847870, 29692.976227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31842.218000, 30565.682000, 1385.920040, 1385.920040, 0.000000, X, Y) && !ellipse(24498.682220, 26042.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37057.234000, 36113.996000, 2070.496060, 519.332815, 304.762000, X, Y) && !ellipse(17415.620285, 27015.509277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33406.896000, 33101.256000, 1741.376050, 1741.376050, 0.000000, X, Y) && !ellipse(31397.329803, 29268.344116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.662537, 28484.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.853699, 28474.628418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17086.996600, 24585.512000, 1053.760030, 1053.760030, 0.000000, X, Y) && !ellipse(24886.212000, 29592.571800, 1283.400037, 1283.400037, 0.000000, X, Y) && !ellipse(18010.581400, 27015.292300, 1616.608047, 1616.608047, 0.000000, X, Y) && !ellipse(21264.106491, 23975.614899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32855.328522, 31916.775665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.896179, 25856.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37919.457062, 38282.410187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.458817, 25519.724182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.391785, 25249.115631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28105.752000, 29004.704000, 1244.344036, 1244.344036, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21819.651459, 26160.738525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.373169, 26781.975555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36400.222748, 35468.766785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17322.090240, 28098.883362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38149.908000, 37803.110000, 2129.632061, 2129.632061, 0.000000, X, Y) && !ellipse(15674.279600, 24660.191600, 1724.128050, 1724.128050, 0.000000, X, Y)
[Thu May 30 16:23:31 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src25.gif
[Thu May 30 16:38:25 2013] Mean detx,y = (-8359.25, 2197.96) 
[Thu May 30 16:38:27 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:48:12 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:48:12 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Thu May 30 16:48:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Thu May 30 20:50:55 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:55 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 14622.00
[Thu May 30 20:50:56 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src25_bgd.pi.gz = 12256.00
[Thu May 30 20:50:56 2013] Got source and background scale factors 82899170.000000, 271880853.000000
[Thu May 30 20:50:56 2013] User source parameters:
  Position = (403.0, 376.1) = 15 1 45.12 -42 3 36.7
  Extent = 43.7 (43.4-87.4)", rotation angle = 0
  Source aperture counts = 10885.0 +/- 121.9
  Background aperture counts = 3737.0
  Rate = 3 +/- 0.03

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.338, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src25.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 4.6e-12
[Thu May 30 20:51:40 2013] Flag b found in src. 25 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] Flag c found in src. 25 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete