[Thu May 30 09:07:53 2013] Detection parameters: Position = (430.8, 415.3) = 15 1 34.28 -42 0 43.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 45.9 +/- 11.9 Background counts = 20.3 Rate = 0.009 +/- 0.002 [Thu May 30 09:08:00 2013] Off-axis axis estimate = 12.80' [Thu May 30 09:09:09 2013] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting [Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 12.83" [Thu May 30 09:09:09 2013] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.029 [Thu May 30 09:09:09 2013] Giving source the simple spatial ID 99 for pass 0, mean size = 12.83" [Thu May 30 09:09:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src99.ximg exists [Thu May 30 09:09:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src99.csv [Thu May 30 09:09:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src99_1.ximg exists [Thu May 30 09:09:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src99.csv [Thu May 30 09:09:14 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src99_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src99.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 30 09:09:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src99.ximg exists [Thu May 30 09:09:18 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src99_1.ximg exists [Thu May 30 09:09:18 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src99 appears to have run properly [Thu May 30 09:10:32 2013] Spatial fit model total counts = 497.477000, observed total counts = 495.000000 [Thu May 30 09:10:32 2013] Offset between fit and detection position for source 16 = 1.251200 pixels [Thu May 30 09:10:32 2013] Warning, changing simple spatial fit ID from 99 to 93 [Thu May 30 09:10:32 2013] 489.658000 total counts/ 454.367000 bgd. counts: snr = 1.655620 Spatial fit parameters: Offset between fit and detection position for source 16 = 1.251200 pixels Position = (429.6, 415.0) = 15 1 34.75 -42 0 47.5 Extent = 11.0 (6.5-17.0)", rotation angle = 0 Source counts = 35.3 +/- 22.1 Background counts = 454.4 Rate = 0.008 +/- 0.005 Deleting source due to low Poisson probability