[Thu May 30 09:07:53 2013] Detection parameters:
  Position = (293.4, 291.1) = 15 2 27.94 -42 9 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.8 +/- 20.6
  Background counts = 24.2
  Rate = 0.04 +/- 0.004

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 0.64'
[Thu May 30 09:09:09 2013] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 6.75"
[Thu May 30 09:09:09 2013] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.950
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 6.75"
[Thu May 30 09:09:10 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src11.ximg exists
[Thu May 30 09:09:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src11.csv
[Thu May 30 09:09:10 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu May 30 09:09:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src11.csv
[Thu May 30 09:09:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu May 30 09:09:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu May 30 09:09:14 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Thu May 30 09:10:31 2013] Spatial fit model total counts = 998.260000, observed total counts = 997.000000
[Thu May 30 09:10:31 2013] Offset between fit and detection position for source 12 = 5.491975 pixels
[Thu May 30 09:10:31 2013] 985.244000 total counts/ 722.958000 bgd. counts: snr = 9.754805
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 5.491975 pixels
  Position = (298.4, 293.4) = 15 2 25.99 -42 9 37.0
  Extent = 13.5 (13.5-27.0)", rotation angle = 0
  Source counts = 262.3 +/- 31.4
  Background counts = 723.0
  Rate = 0.06 +/- 0.007
[Thu May 30 09:10:31 2013] Source 12 is offset by -3.691770 and -3.532697 pixels which is larger than
2 X fitted extent = 0.757605 x 0.757605, not incorporating fit results
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 2
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 13.50"
[Thu May 30 09:11:12 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.943
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 13.50"
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src11.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src11.csv
[Thu May 30 09:11:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src11_1.ximg exists
[Thu May 30 09:11:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src11.csv
[Thu May 30 09:11:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Thu May 30 09:11:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Thu May 30 09:11:17 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 1078.670000, observed total counts = 1075.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 12 = 0.280712 pixels
[Thu May 30 09:12:25 2013] Warning, changing simple spatial fit ID from 11 to 2
[Thu May 30 09:12:25 2013] 1089.518000 total counts/ 725.828000 bgd. counts: snr = 13.499401
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.280712 pixels
  Position = (298.3, 293.1) = 15 2 26.01 -42 9 38.2
  Extent = 20.6 (19.5-41.1)" x 9.7 (7.4-11.8)", rotation angle = 333 (324-340) degrees
  Source counts = 363.7 +/- 33.0
  Background counts = 725.8
  Rate = 0.09 +/- 0.008
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.65
[Thu May 30 09:12:25 2013] Source is asymmetric
[Thu May 30 16:23:30 2013] XMMSAS src. selection expression = ellipse(25904.662800, 25453.947400, 1233.732036, 581.361017, 332.946000, X, Y)
[Thu May 30 16:23:30 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src12_src.reg
[Thu May 30 16:23:30 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (227, 222) - (369, 364)
[Thu May 30 16:23:30 2013] XMMSAS bgd. selection expression = annulus(25904.662800, 25453.947400, 2056.220059, 4112.440118, X, Y) && !ellipse(28959.402000, 26798.090000, 1276.712037, 1276.712037, 0.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(27352.472000, 26238.041400, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(29311.689600, 27031.491000, 1276.712037, 738.860821, 344.225000, X, Y) && !ellipse(26426.092000, 25667.978000, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(29845.154000, 27453.336000, 1330.448038, 1330.448038, 0.000000, X, Y) && !ellipse(28791.014000, 27849.513600, 1274.480037, 1274.480037, 0.000000, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(27192.660797, 26736.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25697.972229, 26239.396423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(26106.278000, 26614.812000, 1108.440032, 1108.440032, 0.000000, X, Y) && !ellipse(25223.856000, 25149.024000, 1577.992045, 1577.992045, 0.000000, X, Y) && !ellipse(22989.148600, 24338.314200, 669.831219, 669.831219, 0.000000, X, Y) && !ellipse(28016.144000, 27811.530400, 1193.608034, 1193.608034, 0.000000, X, Y) && !ellipse(26678.235596, 26839.417114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(24573.676178, 25520.942841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21002.195816, 24415.818756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30634.418000, 29829.692000, 1455.976042, 1455.976042, 0.000000, X, Y) && !ellipse(28792.461975, 28479.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20941.458600, 25413.954200, 871.944025, 871.944025, 0.000000, X, Y) && !ellipse(29938.847870, 29692.976227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24498.682220, 26042.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.662537, 28484.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.853699, 28474.628418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24886.212000, 29592.571800, 1283.400037, 1283.400037, 0.000000, X, Y) && !ellipse(21264.106491, 23975.614899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22740.896179, 25856.857147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.458817, 25519.724182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22625.391785, 25249.115631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28105.752000, 29004.704000, 1244.344036, 1244.344036, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21819.651459, 26160.738525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.373169, 26781.975555, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:30 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src12.gif
[Thu May 30 16:28:48 2013] Mean detx,y = (1464.65, -1903.09) 
[Thu May 30 16:28:50 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:29:08 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:29:09 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu May 30 16:29:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu May 30 20:50:51 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:51 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 1064.00
[Thu May 30 20:50:51 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src12_bgd.pi.gz = 2141.00
[Thu May 30 20:50:51 2013] Got source and background scale factors 2255180.000000, 21361432.000000
[Thu May 30 20:50:51 2013] User source parameters:
  Position = (298.3, 293.1) = 15 2 26.01 -42 9 38.2
  Extent = 20.6 (19.5-41.1)" x 9.7 (7.4-11.8)", rotation angle = 333 (324-340) degrees
  Source aperture counts = 838.0 +/- 33.6
  Background aperture counts = 226.0
  Rate = 0.2 +/- 0.008

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0861, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src12.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 9.4e-13
[Thu May 30 20:51:40 2013] Flag b found in src. 12 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] Flag c found in src. 12 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete