[Thu May 30 09:08:00 2013] Detection parameters:
  Position = (436.4, 440.6) = 15 1 32.13 -41 58 59.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.8 +/- 12.0
  Background counts = 15.1
  Rate = 0.01 +/- 0.002

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 14.36'
[Thu May 30 09:09:09 2013] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 13.61"
[Thu May 30 09:09:09 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.930
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 78 for pass 0, mean size = 13.61"
[Thu May 30 09:09:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src78.ximg exists
[Thu May 30 09:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src78.csv
[Thu May 30 09:09:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src78_1.ximg exists
[Thu May 30 09:09:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src78.csv
[Thu May 30 09:09:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Thu May 30 09:09:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src78.csv
[Thu May 30 09:09:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Thu May 30 09:09:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src78.csv
[Thu May 30 09:09:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:10:32 2013] Warning, spatial fit 78 centroid is now closest to src. 13
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 13
[Thu May 30 09:11:12 2013] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 13.61"
[Thu May 30 09:11:12 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.930
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 13.61"
[Thu May 30 09:11:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src59.ximg exists
[Thu May 30 09:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src59.csv
[Thu May 30 09:11:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu May 30 09:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src59.csv
[Thu May 30 09:11:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu May 30 09:11:19 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu May 30 09:11:19 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Thu May 30 09:12:25 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 101 at 17.707017 pixels away
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 1263.710000, observed total counts = 1073.000000
[Thu May 30 09:12:25 2013] Poor agreement between spatial fit and data for source 101
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:33 2013] XMMSAS src. selection expression = ellipse(37919.457062, 38282.410187, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 16:23:33 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src101_src.reg
[Thu May 30 16:23:33 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (399, 403) - (474, 478)
[Thu May 30 16:23:33 2013] XMMSAS bgd. selection expression = annulus(37919.457062, 38282.410187, 1087.500000, 2175.000000, X, Y) && !ellipse(35012.708000, 32674.498000, 3497.248101, 3497.248101, 0.000000, X, Y) && !ellipse(37057.234000, 36113.996000, 2070.496060, 519.332815, 304.762000, X, Y) && !ellipse(36400.222748, 35468.766785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38149.908000, 37803.110000, 2129.632061, 2129.632061, 0.000000, X, Y)
[Thu May 30 16:23:33 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src101.gif
[Thu May 30 17:00:07 2013] Mean detx,y = (-14165.32, 6018.41) 
[Thu May 30 17:00:08 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 17:00:21 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 17:00:21 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src101_src_b10.pi.gz
[Thu May 30 17:00:21 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src101_bgd.pi.gz
[Thu May 30 20:39:00 2013] Not generating rmf since there are only 73 counts
[Thu May 30 20:39:00 2013] rmf not generated due to insufficient counts
[Thu May 30 20:51:01 2013] Updating aperture counts using extracted products
[Thu May 30 20:51:01 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src101_src_b10.pi.gz = 192.00
[Thu May 30 20:51:01 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src101_bgd.pi.gz = 75.00
[Thu May 30 20:51:01 2013] Got source and background scale factors 1125546.000000, 721062.000000
[Thu May 30 20:51:01 2013] User source parameters:
  Position = (436.4, 440.6) = 15 1 32.13 -41 58 59.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 74.9 +/- 14.9
  Background aperture counts = 117.1
  Rate = 0.02 +/- 0.004

[Thu May 30 20:51:01 2013] Updating counts from extracted products
[Thu May 30 20:51:01 2013] Set source signif. to 74.93/10.82 = 6.93
[Thu May 30 20:51:05 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:05 2013] Using photon index=1.80, rate=0.0177, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src101.arf
[Thu May 30 20:51:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:05 2013] Updating source flux to 4.9e-13
[Thu May 30 20:51:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src101_pl.csv not found, spectral fit skipped or did not complete