[Thu May 30 09:07:53 2013] Detection parameters:
  Position = (315.4, 301.9) = 15 2 19.30 -42 8 57.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.6 +/- 20.5
  Background counts = 29.5
  Rate = 0.05 +/- 0.004

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 1.26'
[Thu May 30 09:09:09 2013] Using EEF radius (= 7.06 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 7.06"
[Thu May 30 09:09:09 2013] source mask rpix=1.6, npix_max = 18, mask sum = 18, frac = 0.999
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.06"
[Thu May 30 09:09:10 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src6.ximg exists
[Thu May 30 09:09:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src6.csv
[Thu May 30 09:09:10 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu May 30 09:09:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src6.csv
[Thu May 30 09:09:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu May 30 09:09:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May 30 09:09:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu May 30 09:09:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu May 30 09:09:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:10:31 2013] Spatial fit model total counts = 1270.090000, observed total counts = 1091.000000
[Thu May 30 09:10:31 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 09:10:31 2013] Spatial fit model total counts = 1091.460000, observed total counts = 1087.000000
[Thu May 30 09:10:31 2013] Offset between fit and detection position for source 10 = 0.535861 pixels
[Thu May 30 09:10:31 2013] Warning, changing simple spatial fit ID from 6 to 9
[Thu May 30 09:10:31 2013] 1047.729000 total counts/ 707.714000 bgd. counts: snr = 12.781128
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.535861 pixels
  Position = (315.0, 302.1) = 15 2 19.50 -42 8 59.0
  Extent = 13.7 (13.7-27.4)", rotation angle = 0
  Source counts = 340.0 +/- 32.4
  Background counts = 707.7
  Rate = 0.08 +/- 0.008
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 11
[Thu May 30 09:10:32 2013] Source is confused with source 62
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 13.69"
[Thu May 30 09:11:12 2013] source mask rpix=3.1, npix_max = 53, mask sum = 51, frac = 0.958
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 13.69"
[Thu May 30 09:11:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src6.ximg exists
[Thu May 30 09:11:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src6.csv
[Thu May 30 09:11:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu May 30 09:11:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src6.csv
[Thu May 30 09:11:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu May 30 09:11:17 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu May 30 09:11:17 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu May 30 09:12:25 2013] Warning, spatial fit 6 centroid is now closest to src. 62
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 16:23:30 2013] XMMSAS src. selection expression = ellipse(27352.472000, 26238.041400, 821.508024, 821.508024, 0.000000, X, Y)
[Thu May 30 16:23:30 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src10_src.reg
[Thu May 30 16:23:30 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (268, 255) - (362, 349)
[Thu May 30 16:23:30 2013] XMMSAS bgd. selection expression = annulus(27352.472000, 26238.041400, 1369.180039, 2738.360079, X, Y) && !ellipse(28959.402000, 26798.090000, 1276.712037, 1276.712037, 0.000000, X, Y) && !ellipse(28157.971526, 26510.819480, 1644.976047, 885.272908, 340.738476, X, Y) && !ellipse(29311.689600, 27031.491000, 1276.712037, 738.860821, 344.225000, X, Y) && !ellipse(26426.092000, 25667.978000, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(29845.154000, 27453.336000, 1330.448038, 1330.448038, 0.000000, X, Y) && !ellipse(25904.662800, 25453.947400, 1644.976047, 775.148022, 332.946000, X, Y) && !ellipse(28791.014000, 27849.513600, 1274.480037, 1274.480037, 0.000000, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(27192.660797, 26736.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25697.972229, 26239.396423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(26106.278000, 26614.812000, 1108.440032, 1108.440032, 0.000000, X, Y) && !ellipse(25223.856000, 25149.024000, 1577.992045, 1577.992045, 0.000000, X, Y) && !ellipse(28016.144000, 27811.530400, 1193.608034, 1193.608034, 0.000000, X, Y) && !ellipse(26678.235596, 26839.417114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(24573.676178, 25520.942841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30634.418000, 29829.692000, 1455.976042, 1455.976042, 0.000000, X, Y) && !ellipse(28792.461975, 28479.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.847870, 29692.976227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24498.682220, 26042.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.662537, 28484.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.853699, 28474.628418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24886.212000, 29592.571800, 1283.400037, 1283.400037, 0.000000, X, Y) && !ellipse(28105.752000, 29004.704000, 1244.344036, 1244.344036, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.373169, 26781.975555, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:30 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src10.gif
[Thu May 30 16:26:20 2013] Mean detx,y = (-269.48, -1713.23) 
[Thu May 30 16:26:23 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:26:36 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:26:37 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu May 30 16:26:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu May 30 20:50:50 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:50 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 1155.00
[Thu May 30 20:50:50 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 668.00
[Thu May 30 20:50:50 2013] Got source and background scale factors 1904096.000000, 5444692.000000
[Thu May 30 20:50:50 2013] User source parameters:
  Position = (315.0, 302.1) = 15 2 19.50 -42 8 59.0
  Extent = 13.7 (13.7-27.4)", rotation angle = 0
  Source aperture counts = 921.4 +/- 35.0
  Background aperture counts = 233.6
  Rate = 0.2 +/- 0.008

[Thu May 30 20:51:04 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:04 2013] Using photon index=1.80, rate=0.0805, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src10.arf
[Thu May 30 20:51:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:04 2013] Updating source flux to 9.4e-13
[Thu May 30 20:51:40 2013] Flag p found in src. 10 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] Flag c found in src. 10 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete