[Thu May 30 09:07:52 2013] Detection parameters:
  Position = (324.9, 305.9) = 15 2 15.62 -42 8 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.7 +/- 22.9
  Background counts = 30.0
  Rate = 0.05 +/- 0.005

[Thu May 30 09:08:00 2013] Off-axis axis estimate = 1.99'
[Thu May 30 09:09:09 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:09 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Thu May 30 09:09:09 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.821
[Thu May 30 09:09:09 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 7.42"
[Thu May 30 09:09:10 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 30 09:09:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src3.csv
[Thu May 30 09:09:10 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 30 09:09:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src3.csv
[Thu May 30 09:09:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 30 09:09:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 30 09:09:14 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 30 09:09:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May 30 09:09:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:10:31 2013] Spatial fit model total counts = 1287.940000, observed total counts = 1283.000000
[Thu May 30 09:10:31 2013] Offset between fit and detection position for source 1 = 1.045830 pixels
[Thu May 30 09:10:31 2013] Warning, changing simple spatial fit ID from 3 to 1
[Thu May 30 09:10:31 2013] 1340.428000 total counts/ 902.266000 bgd. counts: snr = 14.587048
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.045830 pixels
  Position = (325.9, 305.6) = 15 2 15.23 -42 8 43.8
  Extent = 15.2 (15.2-30.5)", rotation angle = 0
  Source counts = 438.2 +/- 36.6
  Background counts = 902.3
  Rate = 0.1 +/- 0.009
[Thu May 30 09:10:32 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:10:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:10:32 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:10:32 2013] Source does appear to be extended
[Thu May 30 09:10:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:10:32 2013] Source is confused with source 3
[Thu May 30 09:11:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:12 2013] Initial guess for spatial extent in simple fitting = 15.24"
[Thu May 30 09:11:12 2013] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.998
[Thu May 30 09:11:12 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 15.24"
[Thu May 30 09:11:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 30 09:11:13 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 30 09:11:13 2013] Fit fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu May 30 09:11:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 30 09:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 30 09:11:16 2013] fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 30 09:11:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 30 09:11:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:12:25 2013] Spatial fit model total counts = 3546.080000, observed total counts = 3419.000000
[Thu May 30 09:12:25 2013] Offset between fit and detection position for source 1 = 1.698319 pixels
[Thu May 30 09:12:25 2013] Warning, changing simple spatial fit ID from 3 to 1
[Thu May 30 09:12:25 2013] 3376.672000 total counts/ 2990.640000 bgd. counts: snr = 7.058968
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.698319 pixels
  Position = (324.2, 305.3) = 15 2 15.88 -42 8 45.3
  Extent = 20.6" x 11.1", rotation angle = 341
  Source counts = 386.0 +/- 58.1
  Background counts = 2990.6
  Rate = 0.09 +/- 0.01
[Thu May 30 09:12:25 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:25 2013] Assessing source extent using major
[Thu May 30 09:12:25 2013] Source does appear to be extended
[Thu May 30 09:12:25 2013] Computing asymmetry using major and minor axis, asym = 1.86
[Thu May 30 09:12:25 2013] Source is asymmetric
[Thu May 30 16:23:29 2013] XMMSAS src. selection expression = ellipse(28157.971526, 26510.819480, 1233.732036, 663.954681, 340.738476, X, Y)
[Thu May 30 16:23:29 2013] Writing source region out to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src1_src.reg
[Thu May 30 16:23:29 2013] Extracting stamp from image fullrun_mos2_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (253, 234) - (395, 376)
[Thu May 30 16:23:30 2013] XMMSAS bgd. selection expression = annulus(28157.971526, 26510.819480, 2056.220059, 4112.440118, X, Y) && !ellipse(28959.402000, 26798.090000, 1276.712037, 1276.712037, 0.000000, X, Y) && !ellipse(32255.526000, 29093.078000, 1532.368044, 1532.368044, 0.000000, X, Y) && !ellipse(32408.496000, 29281.260000, 1486.416043, 1486.416043, 0.000000, X, Y) && !ellipse(27352.472000, 26238.041400, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(33050.127229, 29862.267512, 1276.712037, 825.924578, 320.387964, X, Y) && !ellipse(29311.689600, 27031.491000, 1276.712037, 738.860821, 344.225000, X, Y) && !ellipse(26426.092000, 25667.978000, 1095.344032, 1095.344032, 0.000000, X, Y) && !ellipse(29845.154000, 27453.336000, 1330.448038, 1330.448038, 0.000000, X, Y) && !ellipse(25904.662800, 25453.947400, 1644.976047, 775.148022, 332.946000, X, Y) && !ellipse(28791.014000, 27849.513600, 1274.480037, 1274.480037, 0.000000, X, Y) && !ellipse(30733.264000, 28128.792000, 2006.896058, 2006.896058, 0.000000, X, Y) && !ellipse(29532.008000, 28384.868000, 2911.952084, 2911.952084, 0.000000, X, Y) && !ellipse(27192.660797, 26736.526764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34267.534000, 31462.970000, 2093.960060, 2093.960060, 0.000000, X, Y) && !ellipse(25697.972229, 26239.396423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31911.950000, 28629.018000, 1455.848042, 1455.848042, 0.000000, X, Y) && !ellipse(23895.985720, 25147.928200, 867.392025, 867.392025, 0.000000, X, Y) && !ellipse(26106.278000, 26614.812000, 1108.440032, 1108.440032, 0.000000, X, Y) && !ellipse(25223.856000, 25149.024000, 1577.992045, 1577.992045, 0.000000, X, Y) && !ellipse(28016.144000, 27811.530400, 1193.608034, 1193.608034, 0.000000, X, Y) && !ellipse(32949.253000, 31436.986000, 1607.128046, 1607.128046, 0.000000, X, Y) && !ellipse(26678.235596, 26839.417114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35012.708000, 32674.498000, 3497.248101, 3497.248101, 0.000000, X, Y) && !ellipse(24455.109000, 24779.192000, 1140.832033, 1140.832033, 0.000000, X, Y) && !ellipse(24573.676178, 25520.942841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30634.418000, 29829.692000, 1455.976042, 1455.976042, 0.000000, X, Y) && !ellipse(28792.461975, 28479.781830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29938.847870, 29692.976227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31842.218000, 30565.682000, 1385.920040, 1385.920040, 0.000000, X, Y) && !ellipse(24498.682220, 26042.621582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31397.329803, 29268.344116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.662537, 28484.874176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23263.119202, 25613.444061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.853699, 28474.628418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24886.212000, 29592.571800, 1283.400037, 1283.400037, 0.000000, X, Y) && !ellipse(28105.752000, 29004.704000, 1244.344036, 1244.344036, 0.000000, X, Y) && !ellipse(23770.174042, 26408.009369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24553.373169, 26781.975555, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 16:23:30 2013] Writing fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src1.gif
[Thu May 30 16:24:08 2013] Mean detx,y = (-1068.65, -1678.69) 
[Thu May 30 16:24:11 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 16:24:31 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 16:24:31 2013] Setting source spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 30 16:24:31 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 30 20:50:49 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:49 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1460.00
[Thu May 30 20:50:49 2013] Total counts from fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1464.00
[Thu May 30 20:50:49 2013] Got source and background scale factors 2375140.000000, 16015496.000000
[Thu May 30 20:50:49 2013] User source parameters:
  Position = (324.2, 305.3) = 15 2 15.88 -42 8 45.3
  Extent = 20.6" x 11.1", rotation angle = 341
  Source aperture counts = 1242.9 +/- 39.2
  Background aperture counts = 217.1
  Rate = 0.3 +/- 0.009

[Thu May 30 20:51:03 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:51:03 2013] Using photon index=1.80, rate=0.0914, arf fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src1.arf
[Thu May 30 20:51:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:51:03 2013] Updating source flux to 9.8e-13
[Thu May 30 20:51:40 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Thu May 30 20:52:01 2013] xmm0111090301/analysis//spectral/fullrun_mos2_xmm0111090301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete