[Thu May 30 09:07:50 2013] Detection parameters:
  Position = (175.4, 293.1) = 15 3 14.11 -42 9 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.3 +/- 9.7
  Background counts = 12.9
  Rate = 0.009 +/- 0.002

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 8.93'
[Thu May 30 09:09:02 2013] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 10.89"
[Thu May 30 09:09:02 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 100 for pass 0, mean size = 10.89"
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src100.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src100.csv
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src100_1.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src100.csv
[Thu May 30 09:09:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Thu May 30 09:09:09 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src100 appears to have run properly
[Thu May 30 09:09:59 2013] Warning, spatial fit 100 centroid is now closest to src. 88
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 88
[Thu May 30 09:11:03 2013] Using EEF radius (= 10.89 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 10.89"
[Thu May 30 09:11:03 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 85 for pass 1, mean size = 10.89"
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src85.ximg exists
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src85_1.ximg exists
[Thu May 30 09:11:07 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src85 appears to have run properly
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src85.ximg exists
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists
[Thu May 30 09:11:12 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly
[Thu May 30 09:12:00 2013] Warning, spatial fit 85 centroid is now closest to src. 108
[Thu May 30 09:12:00 2013] Spatial fit model total counts = 327.619000, observed total counts = 324.000000
[Thu May 30 09:12:00 2013] Offset between fit and detection position for source 93 = 6.240692 pixels
[Thu May 30 09:12:00 2013] Warning, changing simple spatial fit ID from 85 to 86
[Thu May 30 09:12:00 2013] 336.277000 total counts/ 227.757000 bgd. counts: snr = 7.190746
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 6.240692 pixels
  Position = (175.9, 286.8) = 15 3 13.89 -42 10 4.9
  Extent = 21.4 (21.3-42.7)", rotation angle = 0
  Source counts = 108.5 +/- 18.3
  Background counts = 227.8
  Rate = 0.03 +/- 0.004
[Thu May 30 09:12:00 2013] Spatial fit model total counts = 1268.730000, observed total counts = 1269.000000
[Thu May 30 09:12:00 2013] Offset between fit and detection position for source 93 = 2.649846 pixels
[Thu May 30 09:12:00 2013] Warning, changing simple spatial fit ID from 86 to 87
[Thu May 30 09:12:00 2013] 1247.514000 total counts/ 975.667000 bgd. counts: snr = 8.703095
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 2.649846 pixels
  Position = (178.6, 286.7) = 15 3 12.86 -42 10 5.4
  Extent = 42.0 (40.7-42.7)" x 22.1 (17.5-28.9)", rotation angle = 36 (18-54) degrees
  Source counts = 271.8 +/- 35.3
  Background counts = 975.7
  Rate = 0.06 +/- 0.008
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.41
[Thu May 30 09:13:08 2013] XMMSAS src. selection expression = ellipse(15488.028000, 24896.934000, 2521.140073, 1324.080038, 36.400000, X, Y)
[Thu May 30 09:13:08 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src93_src.reg
[Thu May 30 09:13:08 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (34, 142) - (323, 432)
[Thu May 30 09:13:08 2013] XMMSAS bgd. selection expression = annulus(15488.028000, 24896.934000, 4201.900121, 8403.800242, X, Y) && !ellipse(25783.164000, 25452.801200, 2176.672063, 936.472027, 152.104000, X, Y) && !ellipse(24059.562800, 25613.310000, 746.853621, 746.853621, 0.000000, X, Y) && !ellipse(23353.250092, 25048.528600, 788.340023, 788.340023, 0.000000, X, Y) && !ellipse(21788.982400, 24175.670000, 1276.624037, 1276.624037, 0.000000, X, Y) && !ellipse(17659.825400, 26361.078000, 1918.592055, 1918.592055, 0.000000, X, Y) && !ellipse(21285.122375, 24832.119385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24201.607000, 24580.728000, 1151.840033, 1151.840033, 0.000000, X, Y) && !ellipse(23771.964000, 25169.722000, 2308.480066, 2308.480066, 0.000000, X, Y) && !ellipse(21005.319458, 25527.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23387.181914, 25028.739085, 1693.488049, 976.497462, 340.356799, X, Y) && !ellipse(22206.278000, 24020.554000, 1252.440036, 1252.440036, 0.000000, X, Y) && !ellipse(16573.045800, 29700.755200, 954.160027, 954.160027, 0.000000, X, Y) && !ellipse(22410.459198, 24923.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17242.294000, 28006.512000, 1591.640046, 1591.640046, 0.000000, X, Y) && !ellipse(17511.484200, 25638.292000, 1592.512046, 1592.512046, 0.000000, X, Y) && !ellipse(25094.972000, 29705.415200, 1274.104037, 1274.104037, 0.000000, X, Y) && !ellipse(20524.106018, 26680.054291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14298.580000, 27275.418000, 1784.472051, 1784.472051, 0.000000, X, Y) && !ellipse(22984.341125, 25972.486328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19356.442000, 23892.697600, 1457.872042, 1457.872042, 0.000000, X, Y) && !ellipse(22216.907562, 27090.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23367.076874, 26656.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.912811, 26409.018280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18374.212000, 24128.312000, 1567.256045, 1567.256045, 0.000000, X, Y) && !ellipse(15528.960000, 24657.966000, 1743.064050, 1743.064050, 0.000000, X, Y) && !ellipse(14829.520000, 25722.296000, 1707.536049, 1707.536049, 0.000000, X, Y)
[Thu May 30 09:13:08 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src93.gif
[Thu May 30 09:54:03 2013] Mean detx,y = (1299.29, -11076.88) 
[Thu May 30 09:54:04 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:56:40 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:56:41 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src93_src_b10.pi.gz
[Thu May 30 09:56:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src93_bgd.pi.gz
[Thu May 30 20:50:43 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:43 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src93_src_b10.pi.gz = 950.00
[Thu May 30 20:50:44 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src93_bgd.pi.gz = 6955.00
[Thu May 30 20:50:44 2013] Got source and background scale factors 10039810.000000, 110359265.000000
[Thu May 30 20:50:44 2013] User source parameters:
  Position = (178.6, 286.7) = 15 3 12.86 -42 10 5.4
  Extent = 42.0 (40.7-42.7)" x 22.1 (17.5-28.9)", rotation angle = 36 (18-54) degrees
  Source aperture counts = 317.3 +/- 31.8
  Background aperture counts = 632.7
  Rate = 0.08 +/- 0.008

[Thu May 30 20:50:49 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:49 2013] Using photon index=1.80, rate=0.0644, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src93.arf
[Thu May 30 20:50:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:49 2013] Updating source flux to 1.3e-12
[Thu May 30 20:51:08 2013] Flag c found in src. 93 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src93_pl.csv not found, spectral fit skipped or did not complete